Consider the situation in which assignment operation is very costly. Which of the following sorting algorithm should be performed so that the number of assignment operations is minimized in general? a) Insertion sort b) Selection sort c) Heap sort d) None

Consider the situation in which assignment operation is very costly. Which  of the following sorting algorithm should be performed so that the number of  assignment operations is minimized in general?
a) Insertion sort
b) Selection sort
c) Heap sort
d) None
by

1 Answer

Answer :

b) Selection sort
by

Related questions

Which of the following is not an in-place sorting algorithm? a) Selection sort b) Heap sort c) Quick sort d) Merge sort

Description : Which of the following is not an in-place sorting algorithm? a) Selection sort b) Heap sort c) Quick sort d) Merge sort

Last Answer : merge sort

Which of the following is a stable sorting algorithm? a) Merge sort b) Typical in-place quick sort c) Heap sort d) Selection sort

Description : Which of the following is a stable sorting algorithm? a) Merge sort b) Typical in-place quick sort c) Heap sort d) Selection sort

Last Answer : a) Merge sort

Which of the following sorting algorithm has the running time that is least dependant on the initial ordering of the input? a) Insertion sort b) Quick sort c) Merge sort d) Selection sort

Description : Which of the following sorting algorithm has the running time that is least dependant on the initial ordering of the input? a) Insertion sort b) Quick sort c) Merge sort d) Selection sort

Last Answer : d) Selection sort

Which of the following is not a stable sorting algorithm? a) Insertion sort b) Selection sort c) Bubble sort d) Merge sort

Description : Which of the following is not a stable sorting algorithm? a) Insertion sort b) Selection sort c) Bubble sort d) Merge sort

Last Answer : b) Selection sort

Which of the following algorithms has lowest worst case time complexity? a) Insertion sort b) Selection sort c) Quick sort d) Heap sort

Description : Which of the following algorithms has lowest worst case time complexity? a) Insertion sort b) Selection sort c) Quick sort d) Heap sort

Last Answer : d) Heap sort

You have to sort a list L, consisting of a sorted list followed by a few ‘random’ elements. Which of the following sorting method would be most suitable for such a task ? (A) Bubble sort (B) Selection sort (C) Quick sort (D) Insertion sort

Description : You have to sort a list L, consisting of a sorted list followed by a few ‘random’ elements. Which of the following sorting method would be most suitable for such a task ? (A) Bubble sort (B) Selection sort (C) Quick sort (D) Insertion sort

Last Answer : (D) Insertion sort

Which of the following algorithm pays the least attention to the ordering of the elements in the input list? a) Insertion sort b) Selection sort c) Quick sort d) None

Description : Which of the following algorithm pays the least attention to the ordering of the elements in the input list? a) Insertion sort b) Selection sort c) Quick sort d) None

Last Answer : b) Selection sort

If the given input array is sorted or nearly sorted, which of the following algorithm gives the best performance? a) Insertion sort b) Selection sort c) Quick sort d) Merge sort

Description : If the given input array is sorted or nearly sorted, which of the following algorithm gives the best performance? a) Insertion sort b) Selection sort c) Quick sort d) Merge sort

Last Answer : a) Insertion sort

Which of the following is not the internal sort? A) Insertion Sort B) Bubble Sort C) Merge Sort D) Heap Sort

Description : Which of the following is not the internal sort? A) Insertion Sort B) Bubble Sort C) Merge Sort D) Heap Sort

Last Answer : C) Merge Sort

Which of the following algorithms sort n integers, having the range 0 to (n2 -1), in ascending order in O(n) time ? (A) Selection sort (B) Bubble sort (C) Radix sort (D) Insertion sort

Description : Which of the following algorithms sort n integers, having the range 0 to (n2 -1), in ascending order in O(n) time ? (A) Selection sort (B) Bubble sort (C) Radix sort (D) Insertion sort

Last Answer : (C) Radix sort

Which of the following sorting algorithm is in-place a) Counting sort b) Radix sort c) Bucket sort d) None

Description : Which of the following sorting algorithm is in-place a) Counting sort b) Radix sort c) Bucket sort d) None

Last Answer : b) Radix sort

……… is not the operation that can be performed on queue. A) Insertion B) Deletion C) Retrieval D) Traversal

Description : ……… is not the operation that can be performed on queue. A) Insertion B) Deletion C) Retrieval D) Traversal

Last Answer : D) Traversal

………………. is not an operation performed on linear list Get More Mcqs from http://www.siteforinfotech.com/p/mcqs.html a) Insertion b) Deletion c) Retrieval d) Traversal A) only a,b and c B) only a and b C) All of the above D) None of the above

Description : ………………. is not an operation performed on linear list Get More Mcqs from http://www.siteforinfotech.com/p/mcqs.html a) Insertion b) Deletion c) Retrieval d) Traversal A) only a,b and c B) only a and b C) All of the above D) None of the above

Last Answer : D) None of the above

Consider the following statements: (a) Depth - first search is used to traverse a rooted tree. (b) Pre - order, Post-order and Inorder are used to list the vertices of an ordered rooted tree. (c) Huffman's algorithm is used to find an optimal binary tree with given weights. (d) Topological sorting provides a labelling such that the parents have larger labels than their children. Which of the above statements are true ? (A) (a) and (b) (B) (c) and (d) (C) (a) , (b) and (c) (D) (a), (b) , (c) and (d)

Description : Consider the following statements: (a) Depth - first search is used to traverse a rooted tree. (b) Pre - order, Post-order and Inorder are used to list the vertices of an ordered rooted tree. (c) Huffman's algorithm is used to find an optimal ... (d) (C) (a) , (b) and (c) (D) (a), (b) , (c) and (d)

Last Answer : (D) (a), (b) , (c) and (d)

Consider an implementation of unsorted single linked list. Suppose it has its representation with a head and a tail pointer (i.e. pointers to the first and last nodes of the linked list). Given the representation, which of the following operation cannot be implemented in O(1) time ? (A) Insertion at the front of the linked list. (B) Insertion at the end of the linked list. (C) Deletion of the front node of the linked list. (D) Deletion of the last node of the linked list.

Description : Consider an implementation of unsorted single linked list. Suppose it has its representation with a head and a tail pointer (i.e. pointers to the first and last nodes of the linked list). Given the ... the front node of the linked list. (D) Deletion of the last node of the linked list.

Last Answer : (D) Deletion of the last node of the linked list. 

Consider the following operations performed on a stack of size 5: Push(a); Pop(); Push(b); Push(c); Pop(); Push(d); Pop(); Pop(); Push(e); Which of the following statements is correct? (A) Underflow occurs (B) Stack operations are performed smoothly (C) Overflow occurs (D) None of the above

Description : Consider the following operations performed on a stack of size 5: Push(a); Pop(); Push(b); Push(c); Pop(); Push(d); Pop(); Pop(); Push(e); Which of the following statements is correct? (A) Underflow occurs (B) Stack operations are performed smoothly (C) Overflow occurs (D) None of the above

Last Answer : (B) Stack operations are performed smoothly

Given two sorted list of size 'm' and 'n' respectively. The number of comparison needed in the worst case by the merge sort algorithm will be (A) m x n (B) max (m, n) (C) min (m, n) (D) m + n – 1

Description : Given two sorted list of size 'm' and 'n' respectively. The number of comparison needed in the worst case by the merge sort algorithm will be (A) m x n (B) max (m, n) (C) min (m, n) (D) m + n – 1

Last Answer :  (D) m + n – 1

State true or false. i) comparisons precede logical operations in java ii) assignment operations succeed increment operations iii) arithmetic operations succeed comparisons iv) x precede + A) i-true, ii-true, iii-false, iv-true B) i-true, ii-false, iii-true, iv-false C) i-false, ii-true, iii-false, iv-false D) i-true, ii-false, iii-false, iv-true

Description : State true or false. i) comparisons precede logical operations in java ii) assignment operations succeed increment operations iii) arithmetic operations succeed comparisons iv) x precede + A) i-true, ii-true, iii-false, ... false, ii-true, iii-false, iv-false D) i-true, ii-false, iii-false, iv-true

Last Answer : A) i-true, ii-true, iii-false, iv-true

Which of the following algorithm design technique is used in the quick sort algorithm? a) Dynamic programming b) Backtracking c) Divide-and-conquer d) Greedy method

Description : Which of the following algorithm design technique is used in the quick sort algorithm? a) Dynamic programming b) Backtracking c) Divide-and-conquer d) Greedy method

Last Answer : Which of the following algorithm design technique is used in the quick sort algorithm? a) Dynamic programming b) Backtracking c) Divide-and-conquer d) Greedy method

To determine the efficiency of an algorithm the time factor is measured by: (A) Counting micro seconds (B) Counting number of key operations (C) Counting number of statements (D) Counting kilobytes of algorithm

Description : To determine the efficiency of an algorithm the time factor is measured by: (A) Counting micro seconds (B) Counting number of key operations (C) Counting number of statements (D) Counting kilobytes of algorithm

Last Answer : (B) Counting number of key operations

A scheduling Algorithm assigns priority proportional to the waiting time of a process. Every process starts with priority zero (lowest priority). The scheduler re-evaluates the process priority for every 'T' time units and decides next process to be scheduled. If the process have no I/O operations and all arrive at time zero, then the scheduler implements .............. criteria. (A) Priority scheduling (B) Round Robin Scheduling (C) Shortest Job First (D) FCFS

Description : A scheduling Algorithm assigns priority proportional to the waiting time of a process. Every process starts with priority zero (lowest priority). The scheduler re-evaluates the process priority for every 'T' time ... (A) Priority scheduling (B) Round Robin Scheduling (C) Shortest Job First (D) FCFS

Last Answer : (B) Round Robin Scheduling

What is the difference between selection sort and bubble sort?

Description : What is the difference between selection sort and bubble sort?

Last Answer : A: In selection sort, successive rounds are executed to select the element which is required to be placed in their sorted position, whereas, in bubble sort, every consecutive pairs of elements are compared ... element at every pass, whereas, in bubble sort we get the largest element in every pass.

In Java variables, if first increment of the variable takes place and then the assignment occurs. This operation is also called ............................. . A) pre increment B) post increment C) incrementation D) pre incrementation

Description : In Java variables, if first increment of the variable takes place and then the assignment occurs. This operation is also called ............................. . A) pre increment B) post increment C) incrementation D) pre incrementation

Last Answer : A) pre increment

What are the operations that can be performed on Files?

Description : What are the operations that can be performed on Files?

Last Answer : Ans: Following operations can be performed on files1. Creation of a file of a specific type. 2. Reading/processing a file. 3. Append/add information to a file. 4. Modify/edit data in a file. 5. Delete items in a file. 6. Update the file.

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : C) ii, iii and iv only

Which of the following logic operations is performed by the following given combinational circuit ? Image (A) EXCLUSIVE-OR (B) EXCLUSIVE-NOR (C) NAND (D) NOR

Description : Which of the following logic operations is performed by the following given combinational circuit ?  (A) EXCLUSIVE-OR (B) EXCLUSIVE-NOR (C) NAND (D) NOR

Last Answer : (A) EXCLUSIVE-OR

Consider the reference string 0 1 2 3 0 1 4 0 1 2 3 4 If FIFO page replacement algorithm is used, then the number of page faults with three page frames and four page frames are .......... and ........... respectively. (A) 10, 9 (B) 9, 9 (C) 10, 10 (D) 9, 10

Description : Consider the reference string 0 1 2 3 0 1 4 0 1 2 3 4 If FIFO page replacement algorithm is used, then the number of page faults with three page frames and four page frames are .......... and ........... respectively. (A) 10, 9 (B) 9, 9 (C) 10, 10 (D) 9, 10

Last Answer : (D) 9, 10

Consider a disk queue with I/O requests on the following cylinders in their arriving order: 6,10,12,54,97,73,128,15,44,110,34,45 The disk head is assumed to be at cylinder 23 and moving in the direction of decreasing number of cylinders. Total number of cylinders in the disk is 150. The disk head movement using SCAN-scheduling algorithm is: (1) 172 (2) 173 (3) 227 (4) 228

Description : Consider a disk queue with I/O requests on the following cylinders in their arriving order: 6,10,12,54,97,73,128,15,44,110,34,45 The disk head is assumed to be at cylinder 23 and moving in the direction ... . The disk head movement using SCAN-scheduling algorithm is: (1) 172 (2) 173 (3) 227 (4) 228

Last Answer : (2) 173

In UNIX operating system, when a process creates a new process using the fork() system call, which of the following state is shared between the parent process and child process? (A) Heap (B) Stack (C) Shared memory segments (D) Both Heap and Stack

Description : In UNIX operating system, when a process creates a new process using the fork() system call, which of the following state is shared between the parent process and child process? (A) Heap (B) Stack (C) Shared memory segments (D) Both Heap and Stack

Last Answer : (C) Shared memory segments 

Which one of the following array represents a binary max-heap? (A) [26, 13, 17, 14, 11, 9, 15] (B) [26, 15, 14, 17, 11, 9, 13] (C) [26, 15, 17, 14, 11, 9, 13] (D) [26, 15, 13, 14, 11, 9, 17]

Description : Which one of the following array represents a binary max-heap? (A) [26, 13, 17, 14, 11, 9, 15] (B) [26, 15, 14, 17, 11, 9, 13] (C) [26, 15, 17, 14, 11, 9, 13] (D) [26, 15, 13, 14, 11, 9, 17]

Last Answer : (C) [26, 15, 17, 14, 11, 9, 13]

Match the following types of variables with the corresponding programming languages: (a) Static variables (i) Local variables in Pascal (b) Stack dynamic (ii) All variables in APL (c) Explicit heap dynamic (iii) Fortran 77 (d) Implicit heap dynamic (iv) All objects in JAVA Codes: (a) (b) (c) (d) (A) (i) (iii) (iv) (ii) (B) (iv) (i) (iii) (ii) (C) (iii) (i) (iv) (ii) (D) (ii) (i) (iii) (iv)

Description : Match the following types of variables with the corresponding programming languages: (a) Static variables (i) Local variables in Pascal (b) Stack dynamic (ii) All variables in APL (c) Explicit heap dynamic (iii) Fortran 77 (d) Implicit ... (ii) (C) (iii) (i) (iv) (ii) (D) (ii) (i) (iii) (iv)

Last Answer : (C) (iii) (i) (iv) (ii) 

Consider f(N) = g(N) + h(N) Where function g is a measure of the cost of getting from the start node to the current node N and h is an estimate of additional cost of getting from the current node N to the goal node. Then f(N) = h(N) is used in which one of the following algorithms ? (A) A* algorithm (B) AO* algorithm (C) Greedy best first search algorithm (D) Iterative A* algorithm

Description : Consider f(N) = g(N) + h(N) Where function g is a measure of the cost of getting from the start node to the current node N and h is an estimate of additional cost of getting from the current ... ? (A) A* algorithm (B) AO* algorithm (C) Greedy best first search algorithm (D) Iterative A* algorithm

Last Answer : (C) Greedy best first search algorithm

Let R be the rectangular window against which the lines are to be clipped using 2D Sutherland-Cohen line clipping algorithm. The rectangular window has lower left-hand corner at (-5,1) and upper righthand corner at (3,7). Consider the following three lines for clipping with the given end point co-ordinates: Line AB: A(-6,2) and B(-1,8) Line CD: C(-1,5) and D(4,8) Line EF: E(-2,3) and F(1,2) Which of the following line(s) is/are candidate for clipping? (A) AB (B) CD (C) EF (D) AB and CD

Description : Let R be the rectangular window against which the lines are to be clipped using 2D Sutherland-Cohen line clipping algorithm. The rectangular window has lower left-hand corner at (-5,1) and upper righthand corner at (3,7). ... s) is/are candidate for clipping? (A) AB (B) CD (C) EF (D) AB and CD

Last Answer : (D) AB and CD

Consider three CPU intensive processes P1, P2, P3 which require 20, 10 and 30 units of time, arrive at times 1, 3 and 7 respectively. Suppose operating system is implementing Shortest Remaining Time first (preemptive scheduling) algorithm, then .............. context switches are required (suppose context switch at the beginning of Ready queue and at the end of Ready queue are not counted). (A) 3 (B) 2 (C) 4 (D) 5

Description : Consider three CPU intensive processes P1, P2, P3 which require 20, 10 and 30 units of time, arrive at times 1, 3 and 7 respectively. Suppose operating system is implementing Shortest Remaining Time first (preemptive scheduling) ... end of Ready queue are not counted). (A) 3 (B) 2 (C) 4 (D) 5

Last Answer : (A) 3

Consider a line AB with A = (0,0) and B = (8, 4). Apply a simple DDA algorithm and compute the first four plots on this line. (1) [(0, 0), (1, 1), (2, 1), (3, 2)] (2) [(0, 0), (1, 1.5), (2, 2), (3, 3)] (3) [(0, 0), (1, 1), (2, 2.5), (3, 3)] (4) [(0, 0), (1, 2), (2, 2), (3, 2)]

Description : Consider a line AB with A = (0,0) and B = (8, 4). Apply a simple DDA algorithm and compute the first four plots on this line. (1) [(0, 0), (1, 1), (2, 1), (3, 2)] (2) [(0, 0), (1, 1.5), (2, 2), (3, 3)] (3) [(0, 0), (1, 1), (2, 2.5), (3, 3)] (4) [(0, 0), (1, 2), (2, 2), (3, 2)]

Last Answer : [(0, 0), (1, 1), (2, 1), (3, 2)] 

................ allows individual row operation to be performed on a given result set or on the generated by a selected by a selected statement. A) Procedure B) Trigger C) Curser D) None of above

Description : ................ allows individual row operation to be performed on a given result set or on the generated by a selected by a selected statement. A) Procedure B) Trigger C) Curser D) None of above

Last Answer : C) Curser

Which of the following operation is used if we are interested in only certain columns of a table? (A) PROJECTION (B) SELECTION (C) UNION (D) JOIN

Description : Which of the following operation is used if we are interested in only certain columns of a table? (A) PROJECTION (B) SELECTION (C) UNION (D) JOIN

Last Answer : (A) PROJECTION

‘AS’ clause is used in SQL for (A) Selection operation. (B) Rename operation. (C) Join operation. (D) Projection operation.

Description : ‘AS’ clause is used in SQL for (A) Selection operation. (B) Rename operation. (C) Join operation. (D) Projection operation.

Last Answer : (B) Rename operation.

Which of the following is true ? I. Implementation of self-join is possible in SQL with table alias. II. Outer-join operation is basic operation in relational algebra. III. Natural join and outer join operations are equivalent. (A) I and II are correct. (B) II and III are correct. (C) Only III is correct. (D) Only I is correct.

Description : Which of the following is true ? I. Implementation of self-join is possible in SQL with table alias. II. Outer-join operation is basic operation in relational algebra. III. Natural join and outer join operations are ... (B) II and III are correct. (C) Only III is correct. (D) Only I is correct.

Last Answer : (D) Only I is correct.

.......... displays the information about the active document such as page number, section number, number of pages, insertion point, position, etc. A) View Bar B) Menu Bar C) Status Bar D) Ruler Lin

Description : .......... displays the information about the active document such as page number, section number, number of pages, insertion point, position, etc. A) View Bar B) Menu Bar C) Status Bar D) Ruler Lin

Last Answer : C) Status Bar

Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue may be complex structures that are ordered on one or several fields. Which of the following is correct? (A) Both S1 and S2 are incorrect. (B) S1 is correct and S2 is incorrect. (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Description : Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue ... . (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Last Answer : (D) Both S1 and S2 are correct.

The ……………. Operator is known as insertion operator. A) >> B) > C) << D) <

Description : The ……………. Operator is known as insertion operator. A) >> B) > C)

Last Answer : C)

If the queue is implemented with a linked list, keeping track of a front pointer and a rear pointer, which of these pointers will change during an insertion into a non-empty queue? (A) Neither of the pointers change (B) Only front pointer changes (C) Only rear pointer changes (D) Both of the pointers changes

Description : If the queue is implemented with a linked list, keeping track of a front pointer and a rear pointer, which of these pointers will change during an insertion into a non-empty queue? (A) Neither of ... (B) Only front pointer changes (C) Only rear pointer changes (D) Both of the pointers changes

Last Answer : (C) Only rear pointer changes

In ............ allocation method for disk block allocation in a file system, insertion and deletion of blocks in a file is easy. (A) Index (B) Linked (C) Contiguous (D) Bit Map

Description : In ............ allocation method for disk block allocation in a file system, insertion and deletion of blocks in a file is easy. (A) Index (B) Linked (C) Contiguous (D) Bit Map

Last Answer : (B) Linked

Which of the following is true for computation time in insertion, deletion and finding maximum and minimum element in a sorted array? (1) Insertion-O(1), Deletion-O(1), Maximum-O(1), Minimum-O(1) (2) Insertion-O(1), Deletion-O(1), Maximum-O(n), Minimum-O(n) (3) Insertion-O(n), Deletion-O(n), Maximum-O(1), Minimum-O(1) (4) Insertion-O(n), Deletion-O(n), Maximum-O(n), Minimum-O(n)

Description : Which of the following is true for computation time in insertion, deletion and finding maximum and minimum element in a sorted array? (1) Insertion-O(1), Deletion-O(1), Maximum-O(1), Minimum-O(1) (2) Insertion-O(1), ... (1), Minimum-O(1) (4) Insertion-O(n), Deletion-O(n), Maximum-O(n), Minimum-O(n)

Last Answer : Answer: 3

The basic operations performed by a computer are A) Arithmetic operation B) Logical operation C) Storage and relative D) All the above

Description : The basic operations performed by a computer are A) Arithmetic operation B) Logical operation C) Storage and relative D) All the above

Last Answer : Answer : D

The basic operations performed by a computers are- 1) Arithmetic Operation 2) Logical Opertaion 3) Storage and Relative 4) All the above

Description : The basic operations performed by a computers are- 1) Arithmetic Operation 2) Logical Opertaion 3) Storage and Relative 4) All the above

Last Answer : 4) All the above

The basic operations performed by a computers are 1 Arithmetic Operation 2 Logical Opertaion 3 Storage and Relative 4 All the above

Description : The basic operations performed by a computers are 1 Arithmetic Operation 2 Logical Opertaion 3 Storage and Relative 4 All the above

Last Answer : 4 All the above