Description : A digital computer did not score over an analog computer in terms of A) Speed B) Accuracy C) Reliability D) Cost
Last Answer : Answer : B
Description : A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Reliability d. Cost
Last Answer : b. Accuracy
Description : A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Cost d. Memory
Last Answer : Accuracy
Description : a factor which would strongly influence a business person to adopt a computer is its a. Accuracy b. Reliability c. Speed d. All of above
Last Answer : d. All of above
Description : On which aspect the analog computers are better than digital? A) Speed B) Accuracy C) Reliability D) Automatic
Description : A hybrid computer a. Resembles digital computer b. Resembles analog computer c. Resembles both a digital and analog computer d. None of the above
Last Answer : c. Resembles both a digital and analog computer
Description : In analog computer a. Input is first converted to digital form b. Input is never converted to digital form c. Output is displayed in digital form d. All of above
Last Answer : b. Input is never converted to digital form
Description : Plotter accuracy is measured in terms of repeatability and a. Buffer size b. Resolution c. Vertical dimensions d. Intelligence
Last Answer : b. Resolution
Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management
Last Answer : a. Pulse code modulation
Description : In income measurement & recognisation of assets & liabilities which of the following concepts goes together ? (a) Periodicity, Accural, Matching (b) Cost, Accural, matching (c) Going concern, cost, Realization (d) Going concern, Periodicity, Reliability
Last Answer : (a) Periodicity, Accural, Matching
Description : Most important advantage of an IC is its a. Easy replacement in case of circuit failure b. Extremely high reliability c. Reduced cost d. Low powers consumption
Last Answer : b. Extremely high reliability
Description : The accuracy of the floating-point numbers representable in two 16-bit words of a computer is approximately a. 16 digits b. 6 digits c. 9 digits d. All of above
Description : A factor which would strongly influence a business person to adopt a computer is its A) Accuracy B) Reliability C) Speed D) All of above
Last Answer : Answer : D
Description : Which of the following statements concerning analog and digital devices are correct? A. The variables in digital systems are fixed quantities, and the variables in analog systems are continuous ... accuracy compared to digital devices. D. Operations in a digital device are performed simultaneously.
Last Answer : Answer: A
Description : Compare analog instrument to digital instrument on the basis of accuracy, resolution, power required and portability.
Last Answer : Comparison between Analog instruments & Digital instruments:
Description : The term GIGO is relate to which characteristics of computers? A) Speed B) Automatic C) Accuracy D) Reliability
Last Answer : Answer : C
Description : A computer can solve more than one kind of problem. This is related to which of the following characteristics? A) Accuracy B) Reliability C) Versatility D) Automatic
Description : A computer has very low failure rate because it uses electronic components. It produces very consistent results. This is highlighted by which of the feature of computer? A) Accuracy B) Reliability C) Versatility D) Automatic
Description : Once you load the suitable program and provide required data, computer does not need human intervention. This feature is known as A) Accuracy B) Reliability C) Versatility D) Automatic
Description : Computer is free from tiresome and boardroom. We call it A) Accuracy B) Reliability C) Diligence D) Versatility
Description : How is the accuracy of an analog computer restricted?
Last Answer : By the accuracy with which physical quantities can be sensed and displayed.
Description : IBM 7000 digital computer a. Belongs to second generation b. Uses VLSI c. Employs semi conductor memory d. Has modular constructions
Last Answer : d. Has modular constructions
Description : The digital computer was developed primarily in a. USSR b. Japan c. USA d. UK
Last Answer : c. USA
Description : The first electronic general purpose digital computer built by Motley and Accrete called ENIAC did not work on the stored program concept. How many number s could it store in its internal memory? a. 100 b. 20 c. 40 d. 80
Last Answer : b. 20
Description : Microprocessors can be used to make a. Computer b. Digital systems c. Calculators d. All of the above
Last Answer : d. All of the above
Description : The first digital computer built with IC chips was known as e. IBM 7090 f. Apple – 1 g. IBM System / 360 h. VAX-10
Last Answer : g. IBM System / 360
Description : The term GIGO is related to A) Accuracy B) Reliability C) Versatility D) Automatic
Last Answer : Answer : A
Description : Which of the following is considered a primary reason for creating an internal audit department? a. To safeguard resources entrusted to the organization. b. To evaluate and improve the ... 's decision making. d. To relieve management of the responsibility for establishing effective controls
Last Answer : To evaluate and improve the effectiveness of control processes.
Description : In conducting an appraisal of the economy and efficiency with which company resources are used, an internal auditor's responsibility is to: a. Verify the accuracy of asset valuation. ... . Determine whether operating standards have been established. d. Review the reliability of operating information
Last Answer : Determine whether operating standards have been established
Description : The extent to which a software tolerates the unexpected problems, is termed as: (A) Accuracy (B) Reliability (C) Correctness (D) Robustness
Last Answer : (D) Robustness
Description : The extent to which a software performs its intended functions without failures, is termed as (A) Robustness (B) Correctness (C) Reliability (D) Accuracy
Last Answer : (C) Reliability
Description : The ALU of a computer normally contains a number of high speed storage element called a. Semiconductor memory b. Registers c. Hard disks d. Magnetic disk
Last Answer : b. Registers
Description : a computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as a. Super computer b. Mini computer c. Micro computer d. Macro computer
Last Answer : a. Super computer
Description : A high quality CAD system uses the following for printing drawing and graphs a. Dot matrix printer b. Digital plotter c. Line printer d. All of the above
Last Answer : b. Digital plotter
Description : What is the latest write-once optical storage media? a. Digital paper b. Magneto-optical disk c. WORM disk d. CD-ROM disk
Last Answer : d. CD-ROM disk
Description : Which of the following terms is the most closely related to main memory? a. Non volatile b. Permanent c. Control unit d. Temporary
Last Answer : d. Temporary
Description : Which of the following statements is true in relation to liabilities? A. Claims against the resources. B. Currently existing obligations which the firm intends to meet at some time in the future. C. It must be capable of being expressed in money terms. D. All of the above
Last Answer : C. It must be capable of being expressed in money terms.
Description : Which of the following statement is correct? A. Fixed assets must always be shown at market value B. Book-keeping and accounting are different terms C. Owner's Equity = Assets + Liabilities D. Patents is an example of current asset
Last Answer : A. Fixed assets must always be shown at market value
Description : Where as a computer mouse moves over the table surface, the trackball is a. Stationary b. Difficult to move c. Dragged d. Moved in small stems
Last Answer : a. Stationary
Description : An approach that permits the computer to work on several programs instead of one is a. On-line thesaurus b. Multiprogramming c. Over lapped processing d. Outline processor
Last Answer : c. Over lapped processing
Description : Which of the following class of computers can process physical quantities such as speed? A) Analog Computers B) Digital Computers C) Hybrid Computers D) None of above
Description : Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description
Last Answer : converting analog to digital signals
Description : The conversation speed of an analog to digital converter is maximum with the following technique. (A) Dual slope AD converter. (B) Serial comparator AD converter. (C) Successive approximation AD converter. (D) Parallel comparator AD converter.
Last Answer : (D) Parallel comparator AD converter.
Description : The accuracy of a digital computer is governed by what factor?
Last Answer : The number of significant figures carried in the computations.
Description : Accuracy in computer terms.
Last Answer : errrm…..client/server
Description : Double entry system is used in which type of accounting a) Cost b)Financial c) Management d) All
Last Answer : b)Financial
Description : Historical cost concept requires the valuation of an asset at A] Original cost B] Replacement value C] Net realizable value D] Market value
Last Answer : A] Original cost