The extent to which a software performs its intended functions without failures, is termed as (A) Robustness (B) Correctness (C) Reliability (D) Accuracy

The extent to which a software performs its intended functions without failures, is termed as (A) Robustness (B) Correctness (C) Reliability (D) Accuracy
by

1 Answer

Answer :

(C) Reliability
by

Related questions

The extent to which a software tolerates the unexpected problems, is termed as: (A) Accuracy (B) Reliability (C) Correctness (D) Robustness

Description : The extent to which a software tolerates the unexpected problems, is termed as: (A) Accuracy (B) Reliability (C) Correctness (D) Robustness

Last Answer : (D) Robustness

A server crashes on the average once in 30 days, that is, the Mean Time Between Failures (MTBF) is 30 days. When this happens, it takes 12 hours to reboot it, that is, the Mean Time to Repair (MTTR) is 12 hours. The availability of server with these reliability data values is approximately: (A) 96.3% (B) 97.3% (C) 98.3% (D) 99.3%

Description : A server crashes on the average once in 30 days, that is, the Mean Time Between Failures (MTBF) is 30 days. When this happens, it takes 12 hours to reboot it, that is, the Mean Time to Repair (MTTR) is 12 ... these reliability data values is approximately: (A) 96.3% (B) 97.3% (C) 98.3% (D) 99.3%

Last Answer : (C) 98.3%

What is needed to make probabilistic systems feasible in the world? a) Reliability b) Crucial robustness c) Feasibility d) None of the mentioned

Description : What is needed to make probabilistic systems feasible in the world? a) Reliability b) Crucial robustness c) Feasibility d) None of the mentioned

Last Answer : b) Crucial robustness

Does political correctness sometimes have the opposite effect of the intended result?

Description : Does political correctness sometimes have the opposite effect of the intended result?

Last Answer : I have found that when some people accuse me of being too PC, they're just mad that I will not allow for their racism, sexism, what have you when, in reality, I am trying to be more inclusive, ... with you have no sense of humor' because, again, I refused to laugh at some awful joke or whatever

Who is responsible in the correctness and accuracy of transmitted information content over a data communication? A. The channel B. The transmitter and receiver C. The modem D. The bridge

Description : Who is responsible in the correctness and accuracy of transmitted information content over a data communication? A. The channel B. The transmitter and receiver C. The modem D. The bridge

Last Answer : B. The transmitter and receiver

The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

Description : The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

Last Answer : C. determined by the sender and receiver

One of the following statements is NOT true : (A) Accuracy expresses the correctness of measurement (B) Precision represents reproducibility of measurement (C) High degree of precision implies high degree of accuracy also (D) High degree of accuracy implies high degree of precesion also

Description : One of the following statements is NOT true : (A) Accuracy expresses the correctness of measurement (B) Precision represents reproducibility of measurement (C) High degree of precision implies high degree of accuracy also (D) High degree of accuracy implies high degree of precesion also

Last Answer : (C) High degree of precision implies high degree of accuracy also

Determine the correctness or otherwise of the following Assertion [a] and the Reason [r]. Assertion: Fast decoupled load flow method gives approximate load flow solution because it uses several assumptions. Reason: Accuracy depends on the power mismatch vector tolerance. a) Both [a] and [r] are true and [r] is the correct reason for [a]. b) Both [a] and [r] are true and [r] is not the correct reason for [a]. c) [a] is false and [r] is true.

Description : Determine the correctness or otherwise of the following Assertion [a] and the Reason [r]. Assertion: Fast decoupled load flow method gives approximate load flow solution because it uses several assumptions. Reason: Accuracy ... the correct reason for [a]. c) [a] is false and [r] is true.

Last Answer : c) [a] is false and [r] is true

A Solution to overcome the challenge to support a large number of application service consumers from around the world, cloud infrastructure providers (i.e., IaaS providers) have established data centers in multiple geographical locations to provide redundancy and ensure reliability in case of site failures is a) Global exchange of cloud resources b) Resource provisioning c) Cloud security d) Resource sharing

Description : A Solution to overcome the challenge to support a large number of application service consumers from around the world, cloud infrastructure providers (i.e., IaaS providers) have established data ... ) Global exchange of cloud resources b) Resource provisioning c) Cloud security d) Resource sharing

Last Answer : Global exchange of cloud resources

............... is often used to prove the correctness of a recursive function. (A) Diagonalization (B) Communitivity (C) Mathematical Induction (D) Matrix Multiplication

Description : ............... is often used to prove the correctness of a recursive function. (A) Diagonalization (B) Communitivity (C) Mathematical Induction (D) Matrix Multiplication

Last Answer : (C) Mathematical Induction

Assume that a program will experience 200 failures in infinite time. It has now experienced 100 failures. The initial failure intensity was 20 failures/CPU hr. Then the current failure intensity will be (A) 5 failures/CPU hr (B) 10 failures/CPU hr. (C) 20 failures/CPU hr. (D) 40 failures/CPU hr.

Description : Assume that a program will experience 200 failures in infinite time. It has now experienced 100 failures. The initial failure intensity was 20 failures/CPU hr. Then the current failure intensity will be (A) 5 failures/CPU hr (B) 10 failures/CPU hr. (C) 20 failures/CPU hr. (D) 40 failures/CPU hr.

Last Answer : (B) 10 failures/CPU hr.

Which one of the following statements is incorrect ? (A) Pareto analysis is a statistical method used for analyzing causes, and is one of the primary tools for quality management. (B) Reliability of a software specifies the probability of failure-free operation of that software for a given time duration. (C) The reliability of a system can also be specified as the Mean Time To Failure (MTTF). (D) In white-box testing, the test cases are decided from the specifications or the requirements.

Description : Which one of the following statements is incorrect ? (A) Pareto analysis is a statistical method used for analyzing causes, and is one of the primary tools for quality management. (B) Reliability of ... (D) In white-box testing, the test cases are decided from the specifications or the requirements.

Last Answer : (D) In white-box testing, the test cases are decided from the specifications or the requirements.

Which one of the following non-functional quality attributes is not highly affected by the architecture of the software ? (A) Performance (B) Reliability (C) Usability (D) Portability

Description : Which one of the following non-functional quality attributes is not highly affected by the architecture of the software ? (A) Performance (B) Reliability (C) Usability (D) Portability

Last Answer : (C) Usability

Software safety is quality assurance activity that focuses on hazards that (A) affect the reliability of a software component (B) may cause an entire system to fail. (C) may result from user input errors. (D) prevent profitable marketing of the final product

Description : Software safety is quality assurance activity that focuses on hazards that (A) affect the reliability of a software component (B) may cause an entire system to fail. (C) may result from user input errors. (D) prevent profitable marketing of the final product

Last Answer : (B) may cause an entire system to fail.

The phrase in our opinion in the auditor’s report is intended to inform users that auditors a. Guarantee fair presentation of the financial statements. b. Act as insurers of the accuracy of the financial statements. c. Certify the material presented in the statements by management. d. Based their conclusions about the statements on professional judgment

Description : The phrase in our opinion in the auditor's report is intended to inform users that auditors a. Guarantee fair presentation of the financial statements. b. Act as insurers of the ... presented in the statements by management. d. Based their conclusions about the statements on professional judgment

Last Answer : Based their conclusions about the statements on professional judgment

A factor which would strongly influence a business person to adopt a computer is its A) Accuracy B) Reliability C) Speed D) All of above

Description : A factor which would strongly influence a business person to adopt a computer is its A) Accuracy B) Reliability C) Speed D) All of above

Last Answer : Answer : D

a factor which would strongly influence a business person to adopt a computer is its a. Accuracy b. Reliability c. Speed d. All of above

Description : a factor which would strongly influence a business person to adopt a computer is its a. Accuracy b. Reliability c. Speed d. All of above

Last Answer : d. All of above

a factor which would strongly influence a business person to adopt a computer is its a. Accuracy b. Reliability c. Speed d. All of above

Description : a factor which would strongly influence a business person to adopt a computer is its a. Accuracy b. Reliability c. Speed d. All of above

Last Answer : d. All of above

On which aspect the analog computers are better than digital? A) Speed B) Accuracy C) Reliability D) Automatic

Description : On which aspect the analog computers are better than digital? A) Speed B) Accuracy C) Reliability D) Automatic

Last Answer : Answer : B

A computer can solve more than one kind of problem. This is related to which of the following characteristics? A) Accuracy B) Reliability C) Versatility D) Automatic

Description : A computer can solve more than one kind of problem. This is related to which of the following characteristics? A) Accuracy B) Reliability C) Versatility D) Automatic

Last Answer : Answer : C

The term GIGO is relate to which characteristics of computers? A) Speed B) Automatic C) Accuracy D) Reliability

Description : The term GIGO is relate to which characteristics of computers? A) Speed B) Automatic C) Accuracy D) Reliability

Last Answer : Answer : C

The term GIGO is related to A) Accuracy B) Reliability C) Versatility D) Automatic

Description : The term GIGO is related to A) Accuracy B) Reliability C) Versatility D) Automatic

Last Answer : Answer : A

A computer has very low failure rate because it uses electronic components. It produces very consistent results. This is highlighted by which of the feature of computer? A) Accuracy B) Reliability C) Versatility D) Automatic

Description : A computer has very low failure rate because it uses electronic components. It produces very consistent results. This is highlighted by which of the feature of computer? A) Accuracy B) Reliability C) Versatility D) Automatic

Last Answer : Answer : B

A digital computer did not score over an analog computer in terms of A) Speed B) Accuracy C) Reliability D) Cost

Description : A digital computer did not score over an analog computer in terms of A) Speed B) Accuracy C) Reliability D) Cost

Last Answer : Answer : B

Once you load the suitable program and provide required data, computer does not need human intervention. This feature is known as A) Accuracy B) Reliability C) Versatility D) Automatic

Description : Once you load the suitable program and provide required data, computer does not need human intervention. This feature is known as A) Accuracy B) Reliability C) Versatility D) Automatic

Last Answer : Answer : D

Computer is free from tiresome and boardroom. We call it A) Accuracy B) Reliability C) Diligence D) Versatility

Description : Computer is free from tiresome and boardroom. We call it A) Accuracy B) Reliability C) Diligence D) Versatility

Last Answer : Answer : C

Which of the following is considered a primary reason for creating an internal audit department? a. To safeguard resources entrusted to the organization. b. To evaluate and improve the effectiveness of control processes. c. To ensure the accuracy, reliability, and timeliness of financial and operating data used in management's decision making. d. To relieve management of the responsibility for establishing effective controls

Description : Which of the following is considered a primary reason for creating an internal audit department? a. To safeguard resources entrusted to the organization. b. To evaluate and improve the ... 's decision making. d. To relieve management of the responsibility for establishing effective controls

Last Answer : To evaluate and improve the effectiveness of control processes.

In conducting an appraisal of the economy and efficiency with which company resources are used, an internal auditor's responsibility is to: a. Verify the accuracy of asset valuation. b. Verify the existence of assets. c. Determine whether operating standards have been established. d. Review the reliability of operating information

Description : In conducting an appraisal of the economy and efficiency with which company resources are used, an internal auditor's responsibility is to: a. Verify the accuracy of asset valuation. ... . Determine whether operating standards have been established. d. Review the reliability of operating information

Last Answer : Determine whether operating standards have been established

A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Reliability d. Cost

Description : A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Reliability d. Cost

Last Answer : b. Accuracy

A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Reliability d. Cost

Description : A digital computer did not score over an analog computer in terms of a. Speed b. Accuracy c. Reliability d. Cost

Last Answer : b. Accuracy

Find out the OSI layer, which performs token management. A) Network Layer B) Transport Layer C) Session Layer D) Presentation Layer

Description : Find out the OSI layer, which performs token management. A) Network Layer B) Transport Layer C) Session Layer D) Presentation Layer

Last Answer : C) Session Layer

Which one from the following is false ? (A) LALR parser is Bottom - Up parser (B) A parsing algorithm which performs a left to right scanning and a right most deviation is RL (1). (C) LR parser is Bottom - Up parser. (D) In LL(1), the 1 indicates that there is a one - symbol look - ahead.

Description : Which one from the following is false ? (A) LALR parser is Bottom - Up parser (B) A parsing algorithm which performs a left to right scanning and a right most deviation is RL (1). (C) LR parser is Bottom - Up parser. (D) In LL(1), the 1 indicates that there is a one - symbol look - ahead.

Last Answer : (B) A parsing algorithm which performs a left to right scanning and a right most deviation is RL (1).

The translator which performs macro calls expansion is called : (A) Macro processor (B) Micro pre-processor (C) Macro pre-processor (D) Dynamic linker

Description : The translator which performs macro calls expansion is called : (A) Macro processor (B) Micro pre-processor (C) Macro pre-processor (D) Dynamic linker

Last Answer : (C) Macro pre-processor 

Which of the following in 8085 microprocessor performs HL = HL + DE ? (A) DAD D (B) DAD H (C) DAD B (D) DAD SP

Description : Which of the following in 8085 microprocessor performs HL = HL + DE ? (A) DAD D (B) DAD H (C) DAD B (D) DAD SP

Last Answer : (A) DAD D

In 8085, which of the following performs: load register pair immediate operation? (1) LDAX rp (2) LHLD addr (3) LXI rp, data (4) INX rp

Description : In 8085, which of the following performs: load register pair immediate operation? (1) LDAX rp (2) LHLD addr (3) LXI rp, data (4) INX rp

Last Answer : Answer: 3

When the surgeon performs an appendectomy, the nurse recognizes that the surgical category will be identified as a) clean contaminated. Clean-contaminated cases are those with a potential, limited source for infection, the exposure to which, to a large extent, can be controlled. b) clean. Clean cases are those with no apparent source of potential infection. c) contaminated. Contaminated cases are those that contain an open and obvious source of potential infection. d) dirty. A traumatic wound with foreign bodies, fecal contamination, or purulent drainage would be considered a dirty case.

Description : When the surgeon performs an appendectomy, the nurse recognizes that the surgical category will be identified as a) clean contaminated. Clean-contaminated cases are those with a potential, limited ... with foreign bodies, fecal contamination, or purulent drainage would be considered a dirty case.

Last Answer : a) clean contaminated. Clean-contaminated cases are those with a potential, limited source for infection, the exposure to which, to a large extent, can be controlled.

After studying and evaluating a client's existing internal control, an auditor has concluded that the policies and procedures are well-designed and functioning as intended. Under these circumstances, the auditor would most likely a. Perform further control tests to the extent outlined in the audit program. b. Determine the control policies and procedures that should prevent or detect errors and fraud. c. Set detection risk at a higher level than would be set under conditions of weak internal control. d. Set detection risk at a lower level than would be set under conditions of weak internal control.

Description : After studying and evaluating a client's existing internal control, an auditor has concluded that the policies and procedures are well-designed and functioning as intended. Under these circumstances, the ... risk at a lower level than would be set under conditions of weak internal control.

Last Answer : Set detection risk at a higher level than would be set under conditions of weak internal control.

As part of Intended Nationally Determined contributions, Indian government through additional forest and tree cover has resolved to create an additional carbon sink (in terms of carbon dioxide equivalent) by year 2030 to the extent of (A) 3.5 to 4 billion tons (B) 2.5 to 3 billion tons (C) 1.5 to 2 billion tons (D) 1 to 1.5 billion tons

Description : As part of Intended Nationally Determined contributions, Indian government through additional forest and tree cover has resolved to create an additional carbon sink (in terms of carbon dioxide equivalent) by year 2030 to the ... billion tons (C) 1.5 to 2 billion tons (D) 1 to 1.5 billion tons

Last Answer : (A) 3.5 to 4 billion tons

Which of the following is / are the Characteristics of information? A) Accuracy and Relevance B) Form of information and Timeliness C) Completeness and Purpose D) All A, B & C

Description : Which of the following is / are the Characteristics of information? A) Accuracy and Relevance B) Form of information and Timeliness C) Completeness and Purpose D) All A, B & C

Last Answer : B) Form of information and Timeliness

Which design metric is used to measure the compactness of the program in terms of lines of code? (A) Consistency (B) Conciseness (C) Efficiency (D) Accuracy

Description : Which design metric is used to measure the compactness of the program in terms of lines of code? (A) Consistency (B) Conciseness (C) Efficiency (D) Accuracy

Last Answer : (B) Conciseness

Ability to learn how to do tasks based on the data given for training or initial experience A. Self Organization B. Adaptive Learning C. Fault tolerance D. Robustness

Description : Ability to learn how to do tasks based on the data given for training or initial experience A. Self Organization B. Adaptive Learning C. Fault tolerance D. Robustness

Last Answer : B. Adaptive Learning

Which one most closely refers to a judgment of the extent to which scores from a test can be used to infer, or predict, the examinees' performance in some activity: a. Content reliability b. Face validity c. Criterion-related validity d. Inference validity

Description : Which one most closely refers to a judgment of the extent to which scores from a test can be used to infer, or predict, the examinees' performance in some activity: a. Content reliability b. Face validity c. Criterion-related validity d. Inference validity

Last Answer : c. Criterion-related validity

............. is the process of checking the developed software for its correctness and error free working -Technology

Description : ............. is the process of checking the developed software for its correctness and error free working -Technology

Last Answer : Validation/Testingis the process of checking the developed software for its correctness and error free working.

In perspective projection, if a line segment joining a point which lies in front of the viewer to a point in back of the viewer is projected to a broken line of infinite extent. This is known as ................... (A) View confusion (B) Vanishing point (C) Topological distortion (D) Perspective foreshortening

Description : In perspective projection, if a line segment joining a point which lies in front of the viewer to a point in back of the viewer is projected to a broken line of infinite extent. This is known ... ....... (A) View confusion (B) Vanishing point (C) Topological distortion (D) Perspective foreshortening

Last Answer : (C) Topological distortion 

The degree of agreement amongst individual results is termed as? A. Specificity B. Precision C. Accuracy D. Sensitivity

Description : The degree of agreement amongst individual results is termed as? A. Specificity B. Precision C. Accuracy D. Sensitivity

Last Answer : B. Precision

The capacity to perform multiple tasks simultaneously is termed as ______ (A) Diligence (B) Versatility (C) Reliability (D) All of the Above

Description : The capacity to perform multiple tasks simultaneously is termed as ______ (A) Diligence (B) Versatility (C) Reliability (D) All of the Above

Last Answer : (B) Versatility

Distinguish software faults and software failures

Description : Distinguish software faults and software failures

Last Answer : Ans: In case of a failure, the software does not do what the user expects. A fault is a programming error that may or may not actually manifest as a failure. A fault can also be ... software is ported to a different hardware platform or a different compiler, or when the software gets extended.

The combination of ……………. And ………….. is often termed the local address of the local portion of the IP address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number D) All of the above

Description : The combination of ……………. And ………….. is often termed the local address of the local portion of the IP address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number D) All of the above

Last Answer : C) Subnet number and host number

The combination of ........... and ............ is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number.

Description : The combination of ........... and ............ is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number.

Last Answer : C) Subnet number and host number.

In a relational model, relations are termed as (A) Tuples. (B) Attributes (C) Tables. (D) Rows.

Description : In a relational model, relations are termed as (A) Tuples. (B) Attributes (C) Tables. (D) Rows.

Last Answer : (C) Tables