Costs associated with the labour turnover can be categorised into: (a) Preventive Costs only (b) Replacement costs only (c) Both of the above (d) Machine costs

Costs associated with the labour turnover can be categorised into:

(a) Preventive Costs only

(b) Replacement costs only

(c) Both of the above

(d) Machine costs
by

1 Answer

Answer :

(c) Both of the above
by

Related questions

Calculate the labour turnover rate according to replacement method from the following: No. of workers on the payroll: - At the beginning of the month: 500 - At the end of the month: 600 During the month, 5 workers left, 20 workers were discharged and 75 workers were recruited. Of these, 10 workers were recruited in the vacancies of those leaving and while the rest were engaged for an expansion scheme. (a) 4.55% (b) 1.82% (c) 6% (d) 3%

Description : Calculate the labour turnover rate according to replacement method from the following: No. of workers on the payroll: - At the beginning of the month: 500 - At the end of the month: 600 During the month, 5 workers left ... engaged for an expansion scheme. (a) 4.55% (b) 1.82% (c) 6% (d) 3%

Last Answer : (b) 1.82%

Calculate workers recruited and joined from the following: Labour turnover rates are 20%, 10% and 6% respectively under Flux method, Replacement method and Separation method. No. of workers replaced during the quarter is 80. (a) 112 (b) 80

Description : Calculate workers recruited and joined from the following: Labour turnover rates are 20%, 10% and 6% respectively under Flux method, Replacement method and  Separation method. No. of workers replaced during the quarter is 80. (a) 112 (b) 80

Last Answer : (a) 112

Calculate workers left and discharged from the following: Labour turnover rates are 20%, 10% and 6% respectively under Flux method, Replacement method and Separation method. No. of workers replaced during the quarter is 80. (a) 112 (b) 80 (c) 48 (d) 64

Description : Calculate workers left and discharged from the following: Labour turnover rates are 20%, 10% and 6% respectively under Flux method, Replacement method and  Separation method. No. of workers replaced during the quarter is 80. (a) 112 (b) 80 (c) 48 (d) 64

Last Answer : (c) 48

Labour turnover means: (a) Turnover generated by labour (b) Rate of change in composition of labour force during a specified period (c) Either of the above (d) Both of the above

Description : Labour turnover means: (a) Turnover generated by labour (b) Rate of change in composition of labour force during a specified period (c) Either of the above (d) Both of the above

Last Answer : (b) Rate of change in composition of labour force during a specified period

Calculate the labour turnover rate according to Separation method from the following: No. of workers on the payroll: - At the beginning of the month: 500 - At the end of the month: 600 During the month, 5 workers left, 20 workers were discharged and 75 workers were recruited. Of these, 10 workers were recruited in the vacancies of those leaving and while the rest were engaged for an expansion scheme. (a) 4.55% (b) 1.82% (c) 6% (d) 3%

Description : Calculate the labour turnover rate according to Separation method from the following: No. of workers on the payroll: - At the beginning of the month: 500 - At the end of the month: 600 During the month, 5 workers left ... engaged for an  expansion scheme. (a) 4.55% (b) 1.82% (c) 6% (d) 3%

Last Answer : (a) 4.55%

Which of the following is not an avoidable cause of labour turnover: (a) Dissatisfaction with Job (b) Lack of training facilities (c) Low wages and allowances (d) Disability, making a worker unfit for work

Description : Which of the following is not an avoidable cause of labour turnover: (a) Dissatisfaction with Job (b) Lack of training facilities (c) Low wages and allowances (d) Disability, making a worker unfit for work

Last Answer : (d) Disability, making a worker unfit for work

Responsibility Centre can be categorised into: (a) Cost Centres only (b) Profit Centres only (c) Investment Centres only (d) Cost Centres, Profit Centres and Investment Centres

Description : Responsibility Centre can be categorised into: (a) Cost Centres only (b) Profit Centres only (c) Investment Centres only (d) Cost Centres, Profit Centres and Investment Centres

Last Answer : (d) Cost Centres, Profit Centres and Investment Centres

Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production overheads, and non –production overheads are often added as a percentage of total production cost 3. The job costing method can be applied in costing batches (a) (1) only (b) (1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Description : Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production ... 1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Last Answer : (c) (1) and (3) only

Which of the following is not a method of cost absorption? (a) Percentage of direct material cost (b) Machine hour rate (c) Labour hour rate (d) Repeated distribution method

Description : Which of the following is not a method of cost absorption? (a) Percentage of direct material cost (b) Machine hour rate (c) Labour hour rate (d) Repeated distribution method

Last Answer : d) Repeated distribution method

For the financial year ended as on March 31, 2013 the figures extracted from the balance sheet of Xerox Limited as under: Opening Stock Rs. 29,000; Purchases Rs. 2,42,000; Sales Rs. 3,20,000; Gross Profit 25% of Sales. Stock Turnover Ratio will be :- (a) 8 times (b) 6 times (c) 9 times (d) 10 times

Description : For the financial year ended as on March 31, 2013 the figures extracted from the balance sheet of Xerox Limited as under: Opening Stock Rs. 29,000; Purchases Rs. 2,42,000; Sales Rs. 3,20,000; Gross Profit 25% of ... Stock Turnover Ratio will be :- (a) 8 times (b) 6 times (c) 9 times (d) 10 times

Last Answer : (a) 8 times

Element/s of Cost of a product are: (a) Material only (b) Labour only (c) Expenses only (d) Material, Labour and expenses

Description : Element/s of Cost of a product are: (a) Material only (b) Labour only (c) Expenses only (d) Material, Labour and expenses

Last Answer : (d) Material, Labour and expenses

Service departments costs should be allocated to: (a) Only Service departments (b) Only Production departments (c) Both Production and service departments (d) None of the production and service departments

Description : Service departments costs should be allocated to: (a) Only Service departments (b) Only Production departments (c) Both Production and service departments (d) None of the production and service departments

Last Answer : (c) Both Production and service departments

In element-wise classification of overheads, which one of the following is not included — (a) Fixed overheads (b) Indirect labour (c) Indirect materials (d) Indirect expenditure.

Description : In element-wise classification of overheads, which one of the following is not included — (a) Fixed overheads (b) Indirect labour (c) Indirect materials (d) Indirect expenditure.

Last Answer : (a) Fixed overheads

. A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Description : . A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour  cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Last Answer : (a) Rs 8.25

Process B had no opening inventory. 13,500 units of raw material were transferred in at Rs 4.50 per unit. Additional material at Rs1.25per unit was added in process. Labour and overheads were Rs 6.25 per completed unit and Rs 2.50 per unit incomplete. If 11,750completed units were transferred out, what was the closing inventory in Process B? (a) Rs. 6562.50 (b) Rs. 12,250.00 (c) Rs. 14,437.50 (d) Rs. 25,375.00

Description : Process B had no opening inventory. 13,500 units of raw material were transferred in at Rs 4.50  per unit. Additional material at Rs1.25per unit was added in process. Labour and overheads were Rs 6.25  per completed unit and Rs ... 6562.50 (b) Rs. 12,250.00 (c) Rs. 14,437.50 (d) Rs. 25,375.00

Last Answer : (a) Rs 142,485

(d) Rs 1.50 Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year. 60% 70% 80% Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production overheads 54,000 58,000 62,000 Other overheads 40,000 40,000 40,000 Total Cost 304,000 343,000 382,000 What would be the total cost in a budget that is prepared at the 77% level of activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Description : Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year.  60% 70% 80%  Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production ... activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Last Answer : (b) Rs 370,300

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

During September, 300 labour hours were worked for a total cost of Rs 4800. The variable overhead expenditure variance was Rs 600 (A). Overheads are assumed to be related to direct labour hours of active working. What was the standard cost per labour hour? (a) Rs 14 (b) Rs 16.50 (c) Rs 17.50

Description : During September, 300 labour hours were worked for a total cost of Rs 4800. The variable  overhead expenditure variance was Rs 600 (A). Overheads are assumed to be related to direct labour  hours of active working. What was the standard cost per labour hour? (a) Rs 14 (b) Rs 16.50 (c) Rs 17.50

Last Answer : (a) Rs 14

During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Description : During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The  labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Last Answer : (d) 18,700

Stores Ledger is a: (a) Quantitative as well as value wise records of material received, issued and balance; (b) Quantitative record of material received, issued and balance (c) Value wise records of material received, issued and balance (d) a record of labour attendance

Description : Stores Ledger is a:  (a) Quantitative as well as value wise records of material received, issued and balance; (b) Quantitative record of material received, issued and balance (c) Value wise records of material received, issued and balance (d) a record of labour attendance

Last Answer : (a) Quantitative as well as value wise records of material received, issued and balance;

Bin Card is a (a) Quantitative as well as value wise records of material received, issued and balance; (b) Quantitative record of material received, issued and balance (c) Value wise records of material received, issued and balance (d) a record of labour attendance

Description : Bin Card is a  (a) Quantitative as well as value wise records of material received, issued and balance; (b) Quantitative record of material received, issued and balance (c) Value wise records of material received, issued and balance (d) a record of labour attendance

Last Answer : (b) Quantitative record of material received, issued and balance

Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Description : Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Last Answer : (c) Rs. 1,70,000

State which of the following are the characteristics of service costing. 1. High levels of indirect costs as a proportion of total costs 2. Use of composite cost units 3. Use of equivalent units (a) (1) only (b) (1) and (2) only (c) (2) only (d) (2) and (3) only

Description : State which of the following are the characteristics of service costing. 1. High levels of indirect costs as a proportion of total costs 2. Use of composite cost units 3. Use of equivalent units (a) (1) only (b) (1) and (2) only (c) (2) only (d) (2) and (3) only

Last Answer : (b) (1) and (2) only

Overhead refers to: (a) Direct or Prime Cost (b) All Indirect costs (c) only Factory indirect costs

Description : Overhead refers to: (a) Direct or Prime Cost (b) All Indirect costs (c) only Factory indirect costs

Last Answer : (b) All Indirect costs

A company's break even point is 6,000 units per annum. The selling price is Rs. 90 per unit and the variable cost is Rs. 40 per unit. What are the company's annual fixed costs? (a) Rs. 120 (b) Rs. 2,40,000

Description : A company's break even point is 6,000 units per annum. The selling price is Rs. 90 per unit and the variable cost is Rs. 40 per unit. What are the company's annual fixed costs? (a) Rs. 120 (b) Rs. 2,40,000

Last Answer : 5,40,000

A company makes a single product and incurs fixed costs of Rs. 30,000 per annum. Variable cost per unit is Rs. 5 and each unit sells for Rs. 15. Annual sales demand is 7,000 units. The breakeven point is: (a) 2,000 units (b) 3,000 units (c) 4,000 units (d) 6,000 units

Description : A company makes a single product and incurs fixed costs of Rs. 30,000 per annum. Variable cost per unit is Rs. 5 and each unit sells for Rs. 15. Annual sales demand is 7,000 units. The breakeven point is: (a) 2,000 units (b) 3,000 units (c) 4,000 units (d) 6,000 units

Last Answer : (b) 3,000 units

A company calculates the prices of jobs by adding overheads to the prime cost and adding 30% to total costs as a profit margin. Job number Y256 was sold for Rs1690 and incurred overheads of Rs 694. What was the prime cost of the job? (a) Rs 489 (b) Rs 606 (c) Rs 996 (d) Rs 1300

Description : A company calculates the prices of jobs by adding overheads to the prime cost and adding 30% to  total costs as a profit margin. Job number Y256 was sold for Rs1690 and incurred overheads of Rs 694.  What was the prime cost of the job? (a) Rs 489 (b) Rs 606 (c) Rs 996 (d) Rs 1300

Last Answer : (b) Rs 606

3. S produces and sells one product, P, for which the data are as follows: Selling price Rs 28 Variable cost Rs 16 Fixed cost Rs 4 The fixed costs are based on a budgeted production and sales level of 25,000 units for the next period(a) 10.1% decrease (b) 11.2% decrease (c) 13.3% decrease (d) 16.0% decrea

Description : 3. S produces and sells one product, P, for which the data are as follows: Selling price Rs 28 Variable cost Rs 16 Fixed cost Rs 4 The fixed costs are based on a budgeted production and sales level of 25 ... period(a) 10.1% decrease (b) 11.2% decrease (c) 13.3% decrease (d) 16.0% decrease

Last Answer : (a) 10.1% decrease

The actual output of 162,500 units and actual fixed costs of Rs. 87000 were exactly as budgeted. However, the actual expenditure of Rs 300,000 was Rs. 18,000 over budget. What was the budget variable cost per unit?

Description :  The actual output of 162,500 units and actual fixed costs of Rs. 87000 were exactly as budgeted.  However, the actual expenditure of Rs 300,000 was Rs. 18,000 over budget. What was the budget variable cost per unit?

Last Answer : (a) Rs 1.20

Sunk costs are: (a) relevant for decision making (b) Not relevant for decision making (c) cost to be incurred in future (d) future costs

Description : Sunk costs are: (a) relevant for decision making (b) Not relevant for decision making (c) cost to be incurred in future (d) future costs

Last Answer : (b) Not relevant for decision making

Uncontrollable costs are the costs which be influenced by the action of a specified member of an undertaking. (a) can not (b) can (c) may or may not (d) must

Description : Uncontrollable costs are the costs which be influenced by the action of a specified member of an  undertaking. (a) can not (b) can (c) may or may not (d) must

Last Answer : (a) can not

Cost Unit is defined as: (a) Unit of quantity of product, service or time in relation to which costs may be ascertained or expressed (b) A location, person or an item of equipment or a group of these for which costs are ascertained and used for cost control. (c) Centres having the responsibility of generating and maximising profits (d) Centres concerned with earning an adequate return on investment

Description : Cost Unit is defined as: (a) Unit of quantity of product, service or time in relation to which costs may be ascertained or  expressed (b) A location, person or an item ... the responsibility of generating and maximising profits (d) Centres concerned with earning an adequate return on investment

Last Answer : Unit of quantity of product, service or time in relation to which costs may be ascertained or  expressed

Which of the following would explain an adverse variable production overhead efficiency variance? 1. Employees were of a lower skill level than specified in the standard 2. Unexpected idle time resulted from a series of machine breakdown 3. Poor Quality material was difficult to process (a) (1), (2) and (3) (b) (1) and (2) (c) (2) and (3) (d) (1) and (3)

Description : Which of the following would explain an adverse variable production overhead efficiency variance? 1. Employees were of a lower skill level than specified in the standard 2. Unexpected idle time resulted from a series of machine breakdown 3. ... b) (1) and (2) (c) (2) and (3) (d) (1) and (3)

Last Answer : (d) (1) and (3)

. Which of the following is not a reason for an idle time variance? (a) Wage rate increase (b) Machine breakdown (c) Illness or injury to worker (d) Non- availability of material

Description : . Which of the following is not a reason for an idle time variance? (a) Wage rate increase (b) Machine breakdown (c) Illness or injury to worker (d) Non- availability of material

Last Answer : (a) Wage rate increase

Blanket overhead rate is: (a) One single overhead absorption rate for the whole factory (b) Rate which is blank or nil rate (c) rate in which multiple overhead rates are calculated for each production department, service department etc. (d) Always a machine hour rate

Description : Blanket overhead rate is: (a) One single overhead absorption rate for the whole factory (b) Rate which is blank or nil rate (c) rate in which multiple overhead rates are calculated for each production department, service  department etc. (d) Always a machine hour rate

Last Answer : One single overhead absorption rate for the whole factory

Most suitable basis for apportioning insurance of machine would be: (a) Floor Area (b) Value of Machines (c) No. of Workers (d) No. of Machines

Description : Most suitable basis for apportioning insurance of machine would be: (a) Floor Area (b) Value of Machines (c) No. of Workers (d) No. of Machines

Last Answer : (b) Value of Machines

Allotment of whole item of cost to a cost centre or cost unit is known as: (a) Cost Apportionment (b) Cost Allocation (c) Cost Absorption (d) Machine hour rate

Description : Allotment of whole item of cost to a cost centre or cost unit is known as: (a) Cost Apportionment (b) Cost Allocation (c) Cost Absorption (d) Machine hour rate

Last Answer : (d) Machine hour rate

The ratio which indicates how quickly debtors are converted into cash is--------- a) Receivable turnover ratio b) Inventory turnover ratio c) Working capital turnover ratio d) Creditors turnover ratio

Description : The ratio which indicates how quickly debtors are converted into cash is--------- a) Receivable turnover ratio b) Inventory turnover ratio c) Working capital turnover ratio d) Creditors turnover ratio

Last Answer : a) Receivable turnover ratio

Debtors turnover ratio measures---------- a) Short term solvency b) Operating efficiency c) Long term solvency d) Credit policy

Description : Debtors turnover ratio measures---------- a) Short term solvency b) Operating efficiency c) Long term solvency d) Credit policy

Last Answer : a) Short term solvency

Debtors turnover ratio is used to calculate------ a) efficiency b) solvency c) liquidity d) profitability

Description : Debtors turnover ratio is used to calculate------ a) efficiency b) solvency c) liquidity d) profitability

Last Answer : a) efficiency

Stock turnover ratio is used to determine -----------------------of an enterprise a) Profitability b) Liquidity& solvency c) Efficiency d) Growth

Description : Stock turnover ratio is used to determine -----------------------of an enterprise a) Profitability b) Liquidity& solvency c) Efficiency d) Growth

Last Answer : c) Efficiency

Debt equity ratio is a-------------------------------------- a) Profitability ratio b) Turnover ratio c) Short term solvency ratio d) Long term solvency ratio

Description : Debt equity ratio is a-------------------------------------- a) Profitability ratio b) Turnover ratio c) Short term solvency ratio d) Long term solvency ratio

Last Answer : d) Long term solvency ratio

Lower stock turnover ratio indicates------------------------------- a) Solvency position b) Monopoly situation c) Over investment in inventory d) None of these

Description : Lower stock turnover ratio indicates------------------------------- a) Solvency position b) Monopoly situation c) Over investment in inventory d) None of these

Last Answer : c) Over investment in inventory

Debtors turnover ratio also known as---------- a) Payable turnover b) Receivable turnover ratio c) Creators turnover ratio d) Debtors velocity

Description : Debtors turnover ratio also known as---------- a) Payable turnover b) Receivable turnover ratio c) Creators turnover ratio d) Debtors velocity

Last Answer : b) Receivable turnover ratio

Current ratio is an example of -------------------- a) Leverage ratio b) Liquidity ratio c) Activity ratio d) Turnover ratio

Description : Current ratio is an example of -------------------- a) Leverage ratio b) Liquidity ratio c) Activity ratio d) Turnover ratio

Last Answer : b) Liquidity ratio

Example of leverage ratio a) Debtors velocity b) Stock turnover ratio c) Current ratio d) Solvency ratio

Description : Example of leverage ratio a) Debtors velocity b) Stock turnover ratio c) Current ratio d) Solvency ratio

Last Answer : d) Solvency ratio

The ratio that includes whether investment in inventory is efficiently used or not a) Inventory turnover ratio b) Working capital turn over ratio c) Fixed asset turn over ratio d) Activity ratio

Description : The ratio that includes whether investment in inventory is efficiently used or not a) Inventory turnover ratio b) Working capital turn over ratio c) Fixed asset turn over ratio d) Activity ratio

Last Answer : a) Inventory turnover ratio

Statutory cost audit are applicable only to: (a) Firm (b) Company

Description : Statutory cost audit are applicable only to: (a) Firm (b) Company

Last Answer : (b) Company

In ‘make or buy’ decision, it is profitable to buy from outside only when the supplier’s price is below the firm’s own ______________. (a) Fixed Cost (b) Variable Cost (c) Total Cost (d) Prime Cost

Description : In ‘make or buy’ decision, it is profitable to buy from outside only when the supplier’s price is below the firm’s own ______________. (a) Fixed Cost (b) Variable Cost (c) Total Cost (d) Prime Cost

Last Answer : (b) Variable Cost