Which of the following is not a method of cost absorption? (a) Percentage of direct material cost (b) Machine hour rate (c) Labour hour rate (d) Repeated distribution method

Which of the following is not a method of cost absorption?

(a) Percentage of direct material cost

(b) Machine hour rate

(c) Labour hour rate

(d) Repeated distribution method
by

1 Answer

Answer :

d) Repeated distribution method
by

Related questions

Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production overheads, and non –production overheads are often added as a percentage of total production cost 3. The job costing method can be applied in costing batches (a) (1) only (b) (1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Description : Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production ... 1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Last Answer : (c) (1) and (3) only

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

Allotment of whole item of cost to a cost centre or cost unit is known as: (a) Cost Apportionment (b) Cost Allocation (c) Cost Absorption (d) Machine hour rate

Description : Allotment of whole item of cost to a cost centre or cost unit is known as: (a) Cost Apportionment (b) Cost Allocation (c) Cost Absorption (d) Machine hour rate

Last Answer : (d) Machine hour rate

During September, 300 labour hours were worked for a total cost of Rs 4800. The variable overhead expenditure variance was Rs 600 (A). Overheads are assumed to be related to direct labour hours of active working. What was the standard cost per labour hour? (a) Rs 14 (b) Rs 16.50 (c) Rs 17.50

Description : During September, 300 labour hours were worked for a total cost of Rs 4800. The variable  overhead expenditure variance was Rs 600 (A). Overheads are assumed to be related to direct labour  hours of active working. What was the standard cost per labour hour? (a) Rs 14 (b) Rs 16.50 (c) Rs 17.50

Last Answer : (a) Rs 14

Blanket overhead rate is: (a) One single overhead absorption rate for the whole factory (b) Rate which is blank or nil rate (c) rate in which multiple overhead rates are calculated for each production department, service department etc. (d) Always a machine hour rate

Description : Blanket overhead rate is: (a) One single overhead absorption rate for the whole factory (b) Rate which is blank or nil rate (c) rate in which multiple overhead rates are calculated for each production department, service  department etc. (d) Always a machine hour rate

Last Answer : One single overhead absorption rate for the whole factory

Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Description : Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Last Answer : (c) Rs. 1,70,000

. A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Description : . A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour  cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Last Answer : (a) Rs 8.25

During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Description : During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The  labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Last Answer : (d) 18,700

(d) Rs 1.50 Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year. 60% 70% 80% Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production overheads 54,000 58,000 62,000 Other overheads 40,000 40,000 40,000 Total Cost 304,000 343,000 382,000 What would be the total cost in a budget that is prepared at the 77% level of activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Description : Q.61. CA Co manufactures a single product and has drawn up the following flexed budget for the year.  60% 70% 80%  Rs Rs Rs Direct materials 120,000 140,000 160,000 Direct labour 90,000 105,000 120,000 Production ... activity? (a) Rs 330,300 (b) Rs 370,300 (c) Rs 373,300 (d) Rs 377,300

Last Answer : (b) Rs 370,300

Calculate the labour turnover rate according to Separation method from the following: No. of workers on the payroll: - At the beginning of the month: 500 - At the end of the month: 600 During the month, 5 workers left, 20 workers were discharged and 75 workers were recruited. Of these, 10 workers were recruited in the vacancies of those leaving and while the rest were engaged for an expansion scheme. (a) 4.55% (b) 1.82% (c) 6% (d) 3%

Description : Calculate the labour turnover rate according to Separation method from the following: No. of workers on the payroll: - At the beginning of the month: 500 - At the end of the month: 600 During the month, 5 workers left ... engaged for an  expansion scheme. (a) 4.55% (b) 1.82% (c) 6% (d) 3%

Last Answer : (a) 4.55%

Calculate the labour turnover rate according to replacement method from the following: No. of workers on the payroll: - At the beginning of the month: 500 - At the end of the month: 600 During the month, 5 workers left, 20 workers were discharged and 75 workers were recruited. Of these, 10 workers were recruited in the vacancies of those leaving and while the rest were engaged for an expansion scheme. (a) 4.55% (b) 1.82% (c) 6% (d) 3%

Description : Calculate the labour turnover rate according to replacement method from the following: No. of workers on the payroll: - At the beginning of the month: 500 - At the end of the month: 600 During the month, 5 workers left ... engaged for an expansion scheme. (a) 4.55% (b) 1.82% (c) 6% (d) 3%

Last Answer : (b) 1.82%

Element/s of Cost of a product are: (a) Material only (b) Labour only (c) Expenses only (d) Material, Labour and expenses

Description : Element/s of Cost of a product are: (a) Material only (b) Labour only (c) Expenses only (d) Material, Labour and expenses

Last Answer : (d) Material, Labour and expenses

Costs associated with the labour turnover can be categorised into: (a) Preventive Costs only (b) Replacement costs only (c) Both of the above (d) Machine costs

Description : Costs associated with the labour turnover can be categorised into: (a) Preventive Costs only (b) Replacement costs only (c) Both of the above (d) Machine costs

Last Answer : (c) Both of the above

Process B had no opening inventory. 13,500 units of raw material were transferred in at Rs 4.50 per unit. Additional material at Rs1.25per unit was added in process. Labour and overheads were Rs 6.25 per completed unit and Rs 2.50 per unit incomplete. If 11,750completed units were transferred out, what was the closing inventory in Process B? (a) Rs. 6562.50 (b) Rs. 12,250.00 (c) Rs. 14,437.50 (d) Rs. 25,375.00

Description : Process B had no opening inventory. 13,500 units of raw material were transferred in at Rs 4.50  per unit. Additional material at Rs1.25per unit was added in process. Labour and overheads were Rs 6.25  per completed unit and Rs ... 6562.50 (b) Rs. 12,250.00 (c) Rs. 14,437.50 (d) Rs. 25,375.00

Last Answer : (a) Rs 142,485

Stores Ledger is a: (a) Quantitative as well as value wise records of material received, issued and balance; (b) Quantitative record of material received, issued and balance (c) Value wise records of material received, issued and balance (d) a record of labour attendance

Description : Stores Ledger is a:  (a) Quantitative as well as value wise records of material received, issued and balance; (b) Quantitative record of material received, issued and balance (c) Value wise records of material received, issued and balance (d) a record of labour attendance

Last Answer : (a) Quantitative as well as value wise records of material received, issued and balance;

Bin Card is a (a) Quantitative as well as value wise records of material received, issued and balance; (b) Quantitative record of material received, issued and balance (c) Value wise records of material received, issued and balance (d) a record of labour attendance

Description : Bin Card is a  (a) Quantitative as well as value wise records of material received, issued and balance; (b) Quantitative record of material received, issued and balance (c) Value wise records of material received, issued and balance (d) a record of labour attendance

Last Answer : (b) Quantitative record of material received, issued and balance

Calculate workers recruited and joined from the following: Labour turnover rates are 20%, 10% and 6% respectively under Flux method, Replacement method and Separation method. No. of workers replaced during the quarter is 80. (a) 112 (b) 80

Description : Calculate workers recruited and joined from the following: Labour turnover rates are 20%, 10% and 6% respectively under Flux method, Replacement method and  Separation method. No. of workers replaced during the quarter is 80. (a) 112 (b) 80

Last Answer : (a) 112

Calculate workers left and discharged from the following: Labour turnover rates are 20%, 10% and 6% respectively under Flux method, Replacement method and Separation method. No. of workers replaced during the quarter is 80. (a) 112 (b) 80 (c) 48 (d) 64

Description : Calculate workers left and discharged from the following: Labour turnover rates are 20%, 10% and 6% respectively under Flux method, Replacement method and  Separation method. No. of workers replaced during the quarter is 80. (a) 112 (b) 80 (c) 48 (d) 64

Last Answer : (c) 48

Labour turnover means: (a) Turnover generated by labour (b) Rate of change in composition of labour force during a specified period (c) Either of the above (d) Both of the above

Description : Labour turnover means: (a) Turnover generated by labour (b) Rate of change in composition of labour force during a specified period (c) Either of the above (d) Both of the above

Last Answer : (b) Rate of change in composition of labour force during a specified period

. Which of the following is not a reason for an idle time variance? (a) Wage rate increase (b) Machine breakdown (c) Illness or injury to worker (d) Non- availability of material

Description : . Which of the following is not a reason for an idle time variance? (a) Wage rate increase (b) Machine breakdown (c) Illness or injury to worker (d) Non- availability of material

Last Answer : (a) Wage rate increase

In element-wise classification of overheads, which one of the following is not included — (a) Fixed overheads (b) Indirect labour (c) Indirect materials (d) Indirect expenditure.

Description : In element-wise classification of overheads, which one of the following is not included — (a) Fixed overheads (b) Indirect labour (c) Indirect materials (d) Indirect expenditure.

Last Answer : (a) Fixed overheads

Which of the following is not an avoidable cause of labour turnover: (a) Dissatisfaction with Job (b) Lack of training facilities (c) Low wages and allowances (d) Disability, making a worker unfit for work

Description : Which of the following is not an avoidable cause of labour turnover: (a) Dissatisfaction with Job (b) Lack of training facilities (c) Low wages and allowances (d) Disability, making a worker unfit for work

Last Answer : (d) Disability, making a worker unfit for work

Calculate the most appropriate unit cost for a distribution division of a multinational company using the following information. Miles travelled 636,500 Tonnes carried 2,479 Number of drivers 20 Hours worked by drivers 35,520 Tonnes miles carried 375,200 Cost incurred 562,800 (a) Rs .88 (b) Rs 1.50 (c) Rs 15.84 (d) Rs28, 140

Description : Calculate the most appropriate unit cost for a distribution division of a multinational company using the following information. Miles travelled 636,500 Tonnes carried 2,479 Number of drivers 20 Hours worked by drivers 35,520 Tonnes miles ... 800 (a) Rs .88 (b) Rs 1.50 (c) Rs 15.84 (d) Rs28, 140

Last Answer : (d) Rs28, 140

Which of the following would explain an adverse variable production overhead efficiency variance? 1. Employees were of a lower skill level than specified in the standard 2. Unexpected idle time resulted from a series of machine breakdown 3. Poor Quality material was difficult to process (a) (1), (2) and (3) (b) (1) and (2) (c) (2) and (3) (d) (1) and (3)

Description : Which of the following would explain an adverse variable production overhead efficiency variance? 1. Employees were of a lower skill level than specified in the standard 2. Unexpected idle time resulted from a series of machine breakdown 3. ... b) (1) and (2) (c) (2) and (3) (d) (1) and (3)

Last Answer : (d) (1) and (3)

Overhead refers to: (a) Direct or Prime Cost (b) All Indirect costs (c) only Factory indirect costs

Description : Overhead refers to: (a) Direct or Prime Cost (b) All Indirect costs (c) only Factory indirect costs

Last Answer : (b) All Indirect costs

The following information is available for the W hotel for the latest thirty day period. Number of rooms available per night 40 Percentage occupancy achieved 65% Room servicing cost incurred Rs. 3900 The room servicing cost per occupied room-night last period, to the nearest Rs, was: (a) Rs 3.25 (b) Rs 5.00 (c) Rs 97.50 (d) Rs 150.00

Description : The following information is available for the W hotel for the latest thirty day period. Number of rooms available per night 40 Percentage occupancy achieved 65% Room servicing cost incurred Rs. 3900 The room servicing cost per occupied room- ... (a) Rs 3.25 (b) Rs 5.00 (c) Rs 97.50 (d) Rs 150.00

Last Answer : (b) Rs 5.00

Which of the following organisations should not be advised to use service costing? (a) Distribution service (b) Hospital (c) Maintenance division of a manufacturing company (d) A light engineering company

Description : Which of the following organisations should not be advised to use service costing? (a) Distribution service (b) Hospital(c) Maintenance division of a manufacturing company (d) A light engineering company

Last Answer : (d) A light engineering company

worker is allowed 60 hours to complete the job on a guaranteed wage of Rs. 10 per hour. Under the Rowan Plan, he gets an hourly wage of Rs. 12 per hour. For the same saving in time, how much he will get under the Halsey Plan? (a) Rs. 720 (b) Rs. 540 (c) Rs. 600 (d) Rs. 900

Description : worker is allowed 60 hours to complete the job on a guaranteed wage of Rs. 10 per hour. Under  the Rowan Plan, he gets an hourly wage of Rs. 12 per hour. For the same saving in time, how much he  will get under the Halsey Plan? (a) Rs. 720 (b) Rs. 540 (c) Rs. 600  (d) Rs. 900

Last Answer : (b) Rs. 540

From the following information, calculate the extra cost of material by following EOQ: Annual consumption: = 45000 units Ordering cost per order: = Rs. 10 Carrying cost per unit per annum: = Rs. 10 Purchase price per unit = Rs. 50 Re-order quantity at present = 45000 units There is discount of 10% per unit in case of purchase of 45000 units in bulk. (a) No saving (b) Rs. 2,00,000 (c) Rs. 2,22,010 (d) Rs. 2,990

Description : From the following information, calculate the extra cost of material by following EOQ: Annual consumption: = 45000 units Ordering cost per order: = Rs. 10  Carrying cost per unit per annum: = Rs. 10  Purchase price per unit = Rs. ... ) No saving (b) Rs. 2,00,000 (c) Rs. 2,22,010 (d) Rs. 2,990

Last Answer : (d) Rs. 2,990

Most suitable basis for apportioning insurance of machine would be: (a) Floor Area (b) Value of Machines (c) No. of Workers (d) No. of Machines

Description : Most suitable basis for apportioning insurance of machine would be: (a) Floor Area (b) Value of Machines (c) No. of Workers (d) No. of Machines

Last Answer : (b) Value of Machines

AT Co makes a single product and is preparing its material usage budget for next year. Each unit of product requires 2kg of material, and 5,000 units of product are to be produced next year. Opening inventory of material is budgeted to be 800 kg and AT co budgets to increase material inventory at the end of next year by 20% The material usage budget for next year is (a) 8,000 Kg((b) 9,840 kg ((c) 10,000 Kg (d) 10,160 Kg no

Description : AT Co makes a single product and is preparing its material usage budget for next year. Each unit of  product requires 2kg of material, and 5,000 units of product are to be produced next year. Opening inventory of material is budgeted ... (a) 8,000 Kg((b) 9,840 kg ((c) 10,000 Kg (d) 10,160 Kg

Last Answer : ((c) 10,000 Kg

Calculate re-order level from the following: Safety stock: 1000 units Consumption per week: 500 units It takes 12 weeks to reach material from the date of ordering. (a) 1000 units (b) 6000 units (c) 3000 units (d) 7000 units

Description : Calculate re-order level from the following: Safety stock: 1000 units Consumption per week: 500 units It takes 12 weeks to reach material from the date of ordering. (a) 1000 units (b) 6000 units (c) 3000 units (d) 7000 units

Last Answer : (d) 7000 units

Out of the following, what is not the work of purchase department: (a) Receiving purchase requisition (b) Exploring the sources of material supply (c) Preparation and execution of purchase orders (d) Accounting for material received

Description : Out of the following, what is not the work of purchase department: (a) Receiving purchase requisition (b) Exploring the sources of material supply (c) Preparation and execution of purchase orders (d) Accounting for material received

Last Answer : (d) Accounting for material received

Which of these is not a Material control technique: (a) ABC Analysis (b) Fixation of raw material levels (c) Maintaining stores ledger (d) Control over slow moving and non moving items

Description : Which of these is not a Material control technique: (a) ABC Analysis (b) Fixation of raw material levels (c) Maintaining stores ledger (d) Control over slow moving and non moving items

Last Answer : (c) Maintaining stores ledger

Calculate the value of closing stock18th January, 2014: 150 units (a) Rs. 765 (b) Rs. 805 (c) Rs. 786 (d) Rs. 700 from the following according to Weighted Average method: 1st January, 2014: Opening balance: 50 units @ Rs. 4 Receipts: 5th January, 2014: 100 units @ Rs. 5 12th January, 2014: 200 units @ Rs. 4.50 Issues: 2nd January, 2014: 30 units

Description : Calculate the value of closing stock from the following according to Weighted Average method: 1st January, 2014: Opening balance: 50 units @ Rs. 4 Receipts: 5th January, 2014: 100 units @ Rs. 5 12th January, 2014: 200 units ... 2014: 150 units (a) Rs. 765 (b) Rs. 805 (c) Rs. 786 (d) Rs. 700

Last Answer : (c) Rs. 786

Calculate the value of closing stock from the following according to LIFO method: 1st January, 2014: Opening balance: 50 units @ Rs. 4 Receipts: 5th January, 2014: 100 units @ Rs. 5 12th January, 2014: 200 units @ Rs. 4.50 Issues: 2nd January, 2014: 30 units 18th January, 2014: 150 units (a) Rs. 765 (b) Rs. 805 (c) Rs. 786 (d) Rs. 700

Description : Calculate the value of closing stock from the following according to LIFO method: 1st January, 2014: Opening balance: 50 units @ Rs. 4 Receipts: 5th January, 2014: 100 units @ Rs. 5 12th January, 2014: 200 units @ Rs. 4.50 ... , 2014: 150 units (a) Rs. 765 (b) Rs. 805 (c) Rs. 786 (d) Rs. 700

Last Answer : (b) Rs. 805

Calculate the value of closing stock from the following according to FIFO method: 1st January, 2014: Opening balance: 50 units @ Rs. 4 Receipts: 5th January, 2014: 100 units @ Rs. 5 12th January, 2014: 200 units @ Rs. 4.50 Issues: 2nd January, 2014: 30 units 18th January, 2014: 150 units (a) Rs. 765 (b) Rs. 805 (c) Rs. 786 (d) Rs. 700

Description : Calculate the value of closing stock from the following according to FIFO method: 1st January, 2014: Opening balance: 50 units @ Rs. 4 Receipts: 5th January, 2014: 100 units @ Rs. 5 12th January, 2014: 200 units @ Rs. 4.50 ... , 2014: 150 units (a) Rs. 765 (b) Rs. 805 (c) Rs. 786 (d) Rs. 700

Last Answer : (a) Rs. 765

In case of rising prices (inflation), FIFO method will: (a) provide lowest value of closing stock and profit (b) provide highest value of closing stock and profit (c) provide highest value of closing stock but lowest value of profit (d) provide highest value of profit but lowest value of closing stock

Description : In case of rising prices (inflation), FIFO method will: (a) provide lowest value of closing stock and profit (b) provide highest value of closing stock and profit (c) provide highest value ... stock but lowest value of profit (d) provide highest value of profit but lowest value of closing stock

Last Answer : (b) provide highest value of closing stock and profit

Which one out of the following is not an inventory valuation method? (a) FIFO (b) LIFO (c) Weighted Average (d) EOQ

Description : Which one out of the following is not an inventory valuation method? (a) FIFO (b) LIFO (c) Weighted Average (d) EOQ

Last Answer : (d) EOQ

Describe the method of costing to be applied in case of Nursing Home: (a) Operating Costing (b) Process Costing (c) Contract Costing (d) Job Costing

Description : Describe the method of costing to be applied in case of Nursing Home: (a) Operating Costing (b) Process Costing (c) Contract Costing (d) Job Costing

Last Answer : (a) Operating Costing

Following information is available of PQR for year ended March, 2013: 4,000 units in process, 3,800 units output, 10% of input is normal wastage, Rs. 2.50 per unit is scrap value and Rs. 46,000 incurred towards total process cost then amount on account of abnormal gain to be transferred to Costing P&L will be:- (a) Rs. 2,500 (b) Rs. 2,000 (c) Rs. 4,000 (d) Rs. 3,500

Description : Following information is available of PQR for year ended March, 2013: 4,000 units in process, 3,800 units output, 10% of input is normal wastage, Rs. 2.50 per unit is scrap value and Rs. 46,000 incurred towards total process cost ... be:- (a) Rs. 2,500 (b) Rs. 2,000 (c) Rs. 4,000 (d) Rs. 3,500

Last Answer : (a) Rs. 2,500

Following information is available of XYZ Limited for quarter ended June, 2013 Fixed cost Rs. 5,00,000 Variable cost Rs. 10 per unit Selling price Rs. 15 per unit Output level 1,50,000 units

Description : Following information is available of XYZ Limited for quarter ended June, 2013 Fixed cost Rs. 5,00,000 Variable cost Rs. 10 per unit Selling price Rs. 15 per unit Output level 1,50,000 units

Last Answer : (a) Rs. 2,50,000

Statutory cost audit are applicable only to: (a) Firm (b) Company

Description : Statutory cost audit are applicable only to: (a) Firm (b) Company

Last Answer : (b) Company

A budget which is prepared in a manner so as to give the budgeted cost for any level of activity is known as: (a) Master budget (b) Zero base budget ((c) Functional budget (d) Flexible budget

Description :  A budget which is prepared in a manner so as to give the budgeted cost for any level of activity is  known as:  (a) Master budget (b) Zero base budget ((c) Functional budget (d) Flexible budget

Last Answer : (d) Flexible budget

In ‘make or buy’ decision, it is profitable to buy from outside only when the supplier’s price is below the firm’s own ______________. (a) Fixed Cost (b) Variable Cost (c) Total Cost (d) Prime Cost

Description : In ‘make or buy’ decision, it is profitable to buy from outside only when the supplier’s price is below the firm’s own ______________. (a) Fixed Cost (b) Variable Cost (c) Total Cost (d) Prime Cost

Last Answer : (b) Variable Cost

The cost per unit of a product manufactured in a factory amounts to Rs. 160 (75% variable) when the production is 10,000 units. When production increases by 25%, the cost of production will be Rs. per unit. (a) Rs. 145 (b) Rs. 150

Description : The cost per unit of a product manufactured in a factory amounts to Rs. 160 (75% variable) when the production is 10,000 units. When production increases by 25%, the cost of production will be Rs. per unit. (a) Rs. 145 (b) Rs. 150

Last Answer : (c) Rs. 152

A company's break even point is 6,000 units per annum. The selling price is Rs. 90 per unit and the variable cost is Rs. 40 per unit. What are the company's annual fixed costs? (a) Rs. 120 (b) Rs. 2,40,000

Description : A company's break even point is 6,000 units per annum. The selling price is Rs. 90 per unit and the variable cost is Rs. 40 per unit. What are the company's annual fixed costs? (a) Rs. 120 (b) Rs. 2,40,000

Last Answer : 5,40,000

It is now expected that the variable production cost per unit and the selling price per unit will each increase by 10%, and fixed production cost will rise by 25%. What will be the new break even point? (a) 8,788 units (b) 11,600 units (c) 11,885 units (d) 12,397 units

Description : It is now expected that the variable production cost per unit and the selling price per unit will each increase by 10%, and fixed production cost will rise by 25%. What will be the new break even point? (a) 8,788 units (b) 11,600 units (c) 11,885 units (d) 12,397 units

Last Answer : (c) 11,885 units

A company manufactures a single product for which cost and selling price data are as follows: Selling price per unit - Rs. 12 Variable cost per unit - Rs. 8 Fixed cost for a period - Rs. 98,000 Budgeted sales for a period - 30,000 units

Description : A company manufactures a single product for which cost and selling price data are as follows: Selling price per unit - Rs. 12 Variable cost per unit - Rs. 8 Fixed cost for a period - Rs. 98,000 Budgeted sales for a period - 30,000 units

Last Answer : (a) 20%