Two of the protocols that can be carried in the Protocol field of an IP packet are? * TCP * UDP * FTP * TFTP

Two of the protocols that can be carried in the Protocol field of an IP packet
are?
* TCP
* UDP
* FTP
* TFTP
by

1 Answer

Answer :

Correct answer: A & B
The following are the fields in an IP segment,
their length, and their definitions:
VERS (Version number - 16 bits)
HLEN (Number of 32-bit words in the header - 4 bits)
Type of Server (How the datagram should be handled - 32 bits)
Total Length (Total length of header and data - 32 bits)
Identification (Provide fragmentation of datagrams to allow different MTUs in the
internet - 4 bits)
Flags (Provide fragmentation of datagrams to allow different MTUs in the internet - 4
bits)
Frag Offset (Provide fragmentation of datagrams to allow different MTUs in the
internet - 6 bits)
TTL (Time-To-Live - 6 bits)
Protocol (Upperlayer protocol sending the datagram - 16 bits)
Header Checksum )Integrity check on the header - 16 bits)
Source IP Address (32 bits)
Destination IP Address (32 bits)
IP Options (network testing, debugging, security and others - 4 bits)
Data (4 bits).
by

Related questions

Which protocol carries messages such as destination Unreachable, Time Exceeded, Parameter Problem, Source Quench, Redirect, Echo, Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply? * ICMP * UDP * TCP * TFTP

Description : Which protocol carries messages such as destination Unreachable, Time Exceeded, Parameter Problem, Source Quench, Redirect, Echo, Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply? * ICMP * UDP * TCP * TFTP

Last Answer : Correct answer: A ICMP (Internet Control Message Protocol) is a network layer internet protocol described in RFC # 792. ICMP reports IP packet information such as destination Unreachable, Time ... Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply.

Which of the transport layer protocols is connectionless? A) UDP B) TCP C) FTP D) Nvt

Description : Which of the transport layer protocols is connectionless? A) UDP B) TCP C) FTP D) Nvt

Last Answer : A) UDP

Which of the following are transport layer protocols used in networking? a. TCP and FTP b. UDP and HTTP c. TCP and UDP d. HTTP and FTP

Description : Which of the following are transport layer protocols used in networking? a. TCP and FTP b. UDP and HTTP c. TCP and UDP d. HTTP and FTP

Last Answer : c. TCP and UDP

Which of the following are transport layer protocols used in networking? a. TCP and FTP b. UDP and HTTP c. TCP and UDP d. HTTP and FTP

Description : Which of the following are transport layer protocols used in networking? a. TCP and FTP b. UDP and HTTP c. TCP and UDP d. HTTP and FTP

Last Answer : c. TCP and UDP

Which of the following are used as transport layer protocols in networking? A. TCP and FTP B. UDP and HTTP C. TCP and UDP D. HTTP and FTP

Description : Which of the following are used as transport layer protocols in networking? A. TCP and FTP B. UDP and HTTP C. TCP and UDP D. HTTP and FTP

Last Answer : C. TCP and UDP

Which of the following are transport layer protocols used in networking? a) TCP and FTP b) UDP and HTTP c) TCP and UDP d) HTTP and FTP

Description : Which of the following are transport layer protocols used in networking? a) TCP and FTP b) UDP and HTTP c) TCP and UDP d) HTTP and FTP

Last Answer : c) TCP and UDP

Which of the transport layer protocols is connectionless? A) UDP B) TCP C) FTP D) Nvt

Description : Which of the transport layer protocols is connectionless? A) UDP B) TCP C) FTP D) Nvt

Last Answer : A) UDP

What field tells the Internet layer how to handle an IP packet? * Type of Service * Identification Flags * Frag Offset

Description : What field tells the Internet layer how to handle an IP packet? * Type of Service * IdentificationFlags * Frag Offset

Last Answer : Correct answer: A The following are the fields in an IP segment, their length, and their definitions: VERS (Version number - 16 bits) HLEN (Number of 32-bit words in the header - 4 bits) Type of ... (32 bits) IP Options (network testing, debugging, security and others - 4 bits) Data (4 bits).

Where would network testing be included in an IP packet? * IP Options field * Identification field * Type of Service field * Reservation field

Description : Where would network testing be included in an IP packet? * IP Options field * Identification field * Type of Service field * Reservation field

Last Answer : Correct answer: A The following are the fields in an IP segment, their length, and their definitions: VERS (Version number - 16 bits) HLEN (Number of 32-bit words in the header - 4 bits) Type of ... (32 bits) IP Options (network testing, debugging, security and others - 4 bits) Data (4 bits).

What do you mean by TCP and UDP?

Description : What do you mean by TCP and UDP?

Last Answer : TCP stands for Transfer control protocol and UDP stands for User Datagrams protocol and TCP is a connection-oriented protocol and UDP is a Connectionless protocol.

Which processes does TCP, but not UDP, use? Source Port - 16 bits, Destination Port - 16 bits, Length - 16 Bits, Checksum - 16 bits, Data * Destination Port - 16 bits, Source Port - 16 bits, Length - 16 Bits, Checksum - 16bits, Data * Source Port - 16 bits, Destination Port - 16 bits, Checksum - 16 Bits, Length - 16 bits, Data * Source Port - 8 bits, Destination Port - 8 bits, Length -8 Bits, Checksum - 8 bits, Data

Description : Which processes does TCP, but not UDP, use?Source Port - 16 bits, Destination Port - 16 bits, Length - 16 Bits, Checksum - 16 bits, Data * Destination Port - 16 bits, Source Port - 16 bits, Length - ... * Source Port - 8 bits, Destination Port - 8 bits, Length -8 Bits, Checksum - 8 bits, Data

Last Answer : Correct answer: A The UDP format for a segment is as follows: Source Port 16 bits Destination Port 16 bits Length 16 bits Checksum 16 bits Data xx bits

Which of the following transport layer protocols is used to support electronic mail? a. SMTP b. IP c. TCP d. UDP

Description : Which of the following transport layer protocols is used to support electronic mail? a. SMTP b. IP c. TCP d. UDP

Last Answer : c. TCP

Which of the following of the TCP/IP protocols is the used for transferring files from one machine to another? A) FTP B) C) SNMP C) SMTP D) D) Rpe

Description : Which of the following of the TCP/IP protocols is the used for transferring files from one machine to another? A) FTP B) C) SNMP C) SMTP D) D) Rpe

Last Answer : A) FTP

Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Description : Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Last Answer : A) FTP

Which of the following of the TCP/IP protocols is the used for transferring files from one machine to another? A) FTP C) SNMP B) SMTP D) Rpe

Description : Which of the following of the TCP/IP protocols is the used for transferring files from one machine to another? A) FTP C) SNMP B) SMTP D) Rpe

Last Answer : A) FTP

Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Description : Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Last Answer : A) FTP

Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Description : Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Last Answer : A) FTP

Name the different TCP/IP Protocols. Explain the working of FTP.

Description : Name the different TCP/IP Protocols. Explain the working of FTP.

Last Answer : TCP/IP Protocols: 1. DNS (Domain Naming System) 2. HTTP(Hypertext Transfer Protocol) 3. Telnet 4. FTP (File Transfer Protocol), 5. TFTP (Trivial File Transfer Protocol), 6. SNMP (Simple ... TCP ports: port 21 is used for the control connection and port 20 is used for the data connection.

Give function of the following TCP/IP protocols. i. ARP ii. FTP

Description : Give function of the following TCP/IP protocols. i. ARP ii. FTP 

Last Answer : i. ARP ARP:(Address resolution protocol)  Networking H/W demands that a datagram contain the physical address of the intended recipient. If problem Address Resolution protocol (ARP) was developed. ARP ... . FTP uses port 21 for the control connection and port 20 for the data connection. 

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

Basic Networking Concepts 1. Introduction 2. Protocols 3. Protocol Layers 4. Network Interconnection/Internet

Description : Basic Networking Concepts 1. Introduction 2. Protocols 3. Protocol Layers 4. Network Interconnection/Internet

Last Answer : OSI Layers Physical layer: ensures a safe and efficient travel of data; consists of electronic circuits for data transmission etc. Data link layer: in charge of data encapsulation ... mails. -SNMP (Simple Network Management Protocol) allows the management of the network. 

Explain the different Layers of TCP/IP Model.

Description : Explain the different Layers of TCP/IP Model.

Last Answer : Application Layer, Transport Layer, Network or Internet Layer, Network interface layer.

What do you mean by the TCP/IP Model?

Description : What do you mean by the TCP/IP Model?

Last Answer : TCP/IP stands for Transmission control protocol and Internet protocol. It describes how the data will get transmitted and routed from end to end communication. 

Which fields of an IP packet provide for fragmentation of datagrams to allow differing MTUs in the internet? * Identification * Flags * Frag Offset * Type of Service * Total Length

Description : Which fields of an IP packet provide for fragmentation of datagrams to allow differing MTUs in the internet? * Identification * Flags * Frag Offset * Type of Service * Total Length

Last Answer : Correct answer: A, B & C The following are the fields in an IP segment, their length, and their definitions: VERS (Version number - 16 bits) HLEN (Number of 32-bit words in the header - 4 bits) ... Address (32 bits) IP Options (network testing, debugging, security and others - 4 bits) Data (4 bits).

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Description : Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Last Answer : c. TCP

Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP

Description : Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP

Last Answer : A. TCP/IP 

FTP utilizes TCP/IP protocol suite. -Technology

Description : FTP utilizes TCP/IP protocol suite. -Technology

Last Answer : True FTP is the easiest way to transfer files between computers via an Internet and utilizes TCP (Transmission Control Protocol)/IP (Internet Protocol) systems to perform uploading and downloading tasks.

Which of the following TCP/IP protocol is used for transferring electronic mail messages from one machine to another? A. FTP B. SNMP C. SMTP D. RPC E. None of the above

Description : Which of the following TCP/IP protocol is used for transferring electronic mail messages from one machine to another? A. FTP B. SNMP C. SMTP D. RPC E. None of the above

Last Answer : SMTP

The protocol which allows the file transfer between computers is a. TCP/IP b. FTP c. HTTP d. SOA

Description : The protocol which allows the file transfer between computers is a. TCP/IP b. FTP c. HTTP d. SOA

Last Answer : b. FTP

The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

The transport layer protocols used for real time multimedia, file transfer, DNS and email, respectively are: a. TCP, UDP, UDP and TCP b. UDP, TCP, TCP and UDP c. UDP, TCP, UDP and TCP d. TCP, UDP, TCP and UDP

Description : The transport layer protocols used for real time multimedia, file transfer, DNS and email, respectively are: a. TCP, UDP, UDP and TCP b. UDP, TCP, TCP and UDP c. UDP, TCP, UDP and TCP d. TCP, UDP, TCP and UDP

Last Answer : c. UDP, TCP, UDP and TCP

TCP and UDP are called ________ a. Application protocols b. Session protocols c. Transport protocols d. Network protocols

Description : TCP and UDP are called ________ a. Application protocols b. Session protocols c. Transport protocols d. Network protocols

Last Answer : c. Transport protocols

TCP and UDP are called ________ A. Application protocols B. Session protocols C. Transport protocols D. Network protocols

Description : TCP and UDP are called ________ A. Application protocols B. Session protocols C. Transport protocols D. Network protocols

Last Answer : C. Transport protocols

Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP

Description : Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP

Last Answer : d. UDP

Which transport layer protocols is used by DHCP:- a. RSVP b.TCP c. DCCP d. UDP

Description : Which transport layer protocols is used by DHCP:- a. RSVP b.TCP c. DCCP d. UDP

Last Answer : d. UDP

Port no.(6346,6347) Gnutella service having which protocols ….. a. TCP b. UDP c. TCP, UDP d. NONE

Description : Port no.(6346,6347) Gnutella service having which protocols ….. a. TCP b. UDP c. TCP, UDP d. NONE

Last Answer : c. TCP, UDP

TCP and UDP are called? A. Application protocols B. Session protocols C. Transport protocols D. Network protocols

Description :  TCP and UDP are called? A. Application protocols B. Session protocols C. Transport protocols D. Network protocols

Last Answer : C. Transport protocols  

FTP standsfor

Description : FTP standsfor

Last Answer : A) File transfer protocol

Which of the following is/are example(s) of stateful application layer protocols? (i) HTTP (ii) FTP (iii) TCP (iv) POP3 a. (i) and (ii) only b. (ii) and (iii) only c. (ii) and (iv) only d. (iv) only

Description : Which of the following is/are example(s) of stateful application layer protocols? (i) HTTP (ii) FTP (iii) TCP (iv) POP3 a. (i) and (ii) only b. (ii) and (iii) only c. (ii) and (iv) only d. (iv) only

Last Answer : c. (ii) and (iv) only

In one of the pairs of protocols given below, both the protocols can use multiple TCP connections between thesame client and the server. Which one is that? a. HTTP, FTP b. HTTP, TELNET c. FTP, SMTP d. HTTP, SMTP

Description : In one of the pairs of protocols given below, both the protocols can use multiple TCP connections between the same client and the server. Which one is that? a. HTTP, FTP b. HTTP, TELNET c. FTP, SMTP d. HTTP, SMTP

Last Answer : a. HTTP, FTP

What are the two types of access lists that can be configured on a Cisco router? * Standard * Extended * Filtering * Packet

Description : What are the two types of access lists that can be configured on a Cisco router? * Standard * Extended * Filtering * Packet

Last Answer : Correct answer: A & B The access lists are standard and extended. Standard access lists for IP check the source address of packets that could be routed. Extended access lists can check the source and destination packet plus check for specific protocols, port numbers, etc

What's a good packet sniffer for OS X?

Description : What's a good packet sniffer for OS X?

Last Answer : answer:Here are some that I really like: Eavesdrop: http://www.baurhome.net/software/eavesdrop/ Ettercap: http://ettercap.sourceforge.net/ KisMAC: http://kismac.macpirate.ch/about.php I still have yet to find a remarkably fast packet sniffer, but these are certainly satisfactory.

When using access lists, what does a Cisco router check first? * To see if the packet is routable or bridgeable * The destination address * The source address * The packet contents

Description : When using access lists, what does a Cisco router check first? * To see if the packet is routable or bridgeable * The destination address * The source address * The packet contents

Last Answer : Correct answer: A The first thing checked is to see if the packet is routable or bridgeable. If it is not, the packet will be dropped.