In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

In packet-filtering router, the following information can be external from the packet header.
i) Source IP address ii) Destination IP address
iii) TCP/UDP source port iv) ICMP message type
v) TCP/UDP destination port
A) i, ii, iii and iv only
B) i, iii, iv and v only
C) ii, iii, iv and v only
D) All i, ii, iii, iv and v
by

1 Answer

Answer :

D) All i, ii, iii, iv and v
by

Related questions

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Last Answer : 2) Packet Filtering Firewall

Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Last Answer : 2 Packet Filtering Firewall

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from the sender to the destination network. C. It uses a protocol that will be rejected by the gateway to determine the location. D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Which protocol carries messages such as destination Unreachable, Time Exceeded, Parameter Problem, Source Quench, Redirect, Echo, Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply? * ICMP * UDP * TCP * TFTP

Description : Which protocol carries messages such as destination Unreachable, Time Exceeded, Parameter Problem, Source Quench, Redirect, Echo, Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply? * ICMP * UDP * TCP * TFTP

Last Answer : Correct answer: A ICMP (Internet Control Message Protocol) is a network layer internet protocol described in RFC # 792. ICMP reports IP packet information such as destination Unreachable, Time ... Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply.

In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Description : In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Last Answer : d. Destination port number

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

Which among the below stated datagram discard code fields in ICMP is/are generated if a router fails to forward a packet due to administrative filtering? a. Source Route Failed b. Communication Administratively Prohibited c. Host Precedence Violation d. Precedence Cut-off in Effect

Description : Which among the below stated datagram discard code fields in ICMP is/are generated if a router fails to forward a packet due to administrative filtering? a. Source Route Failed b. Communication Administratively Prohibited c. Host Precedence Violation d. Precedence Cut-off in Effect

Last Answer : b. Communication Administratively Prohibited

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Description : Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Last Answer : D) All of the above

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks ... only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Description : Which of the following is / are the types of firewall? A) Packet Filtering Firewall B) Dual Homed Gateway Firewall C) Screen Host Firewall D) All of the above

Last Answer : D) All of the above

ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring filesfrom one machine to another C. a protocol used to monitor computersD.a protocol that handles error andcontrol messagesE.None of the above

Description : ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol that handles error andcontrol messages

DNS can obtain the ..................of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Description : DNS can obtain the ..................of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Last Answer : B) IP address

Which processes does TCP, but not UDP, use? Source Port - 16 bits, Destination Port - 16 bits, Length - 16 Bits, Checksum - 16 bits, Data * Destination Port - 16 bits, Source Port - 16 bits, Length - 16 Bits, Checksum - 16bits, Data * Source Port - 16 bits, Destination Port - 16 bits, Checksum - 16 Bits, Length - 16 bits, Data * Source Port - 8 bits, Destination Port - 8 bits, Length -8 Bits, Checksum - 8 bits, Data

Description : Which processes does TCP, but not UDP, use?Source Port - 16 bits, Destination Port - 16 bits, Length - 16 Bits, Checksum - 16 bits, Data * Destination Port - 16 bits, Source Port - 16 bits, Length - ... * Source Port - 8 bits, Destination Port - 8 bits, Length -8 Bits, Checksum - 8 bits, Data

Last Answer : Correct answer: A The UDP format for a segment is as follows: Source Port 16 bits Destination Port 16 bits Length 16 bits Checksum 16 bits Data xx bits

In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Description : In.................. Mode, the authentication header is inserted immediately after the IP header. A) Tunnel B) Transport C) Authentication D) Both A and B

Last Answer : A) Tunnel

The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Description : The components of IP security includes …………………. A) Authentication Header (AH) B) Encapsulating Security Payload (ESP) C) Internet key Exchange (IKE) D) All of the above

Last Answer : D) All of the above

Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Description : Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Last Answer : c. ARP

Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Description : Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Last Answer : B) Session Layer

The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

Which of the following of the TCP/IP protocolsis the used for transferring filesfrom one machine to another? A) FTP C) SNMP B) SMTP D) Rpe

Description : Which of the following of the TCP/IP protocolsis the used for transferring filesfrom one machine to another? A) FTP C) SNMP B) SMTP D) Rpe

Last Answer : A) FTP

TCP/IP ..................layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP ..................layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) UDP

Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Description : Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Last Answer : A) FTP

The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP

Description : The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP

Last Answer : A) Telnet

Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Description : Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Last Answer : TCP/IP Model contains following layer. 1) Host-to-Network Layer - It defines characteristics of transmission media. It also concern with delivery of data when two systems are attached to same network ... such broadcasts are not forwarded by routers, so a RARP server is needed on each network. 

Explain the services provided by transport layer in TCP/IP model.

Description : Explain the services provided by transport layer in TCP/IP model.

Last Answer : Responsibility of process to process delivery of message Ensure that whole message arrives in order. 1. Service point addressing: -several programs run at a time on computer. Delivery is ... transport layer without error(damage or loss or duplication). Error correction is done by retransmission.

Two of the protocols that can be carried in the Protocol field of an IP packet are? * TCP * UDP * FTP * TFTP

Description : Two of the protocols that can be carried in the Protocol field of an IP packet are? * TCP * UDP * FTP * TFTP

Last Answer : Correct answer: A & B The following are the fields in an IP segment, their length, and their definitions: VERS (Version number - 16 bits) HLEN (Number of 32-bit words in the header - 4 bits) Type ... (32 bits) IP Options (network testing, debugging, security and others - 4 bits) Data (4 bits).

Which processes does TCP, but not UDP, use? a. Windowing b. Acknowledgements c. Both a and b d. Destination Port

Description : Which processes does TCP, but not UDP, use? a. Windowing b. Acknowledgements c. Both a and b d. Destination Port

Last Answer : c. Both a and b

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP trafficc. stop incoming traffic from a specific IP address but allow outgoing traffic to the same IP address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Description : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Last Answer : Which of the following are the solutions to network security? i) Encryption ii) Authentication iii) Authorization iv) Non-repudiation A) i, ii and iii only B) ii, iii and iv only C) i, iii and iv only D) All i, ii, iii and iv

Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Description : Which of the following operations can be performed by using FTP. i) Connect to a remote host ii) Select directory iii) Define the transfer mode iv) List file available A) i, and ii only B) i, ii and iii only C) ii, iii and iv only D) All i, ii, iii and iv

Last Answer : D) All i, ii, iii and iv

When using access lists, what does a Cisco router check first? * To see if the packet is routable or bridgeable * The destination address * The source address * The packet contents

Description : When using access lists, what does a Cisco router check first? * To see if the packet is routable or bridgeable * The destination address * The source address * The packet contents

Last Answer : Correct answer: A The first thing checked is to see if the packet is routable or bridgeable. If it is not, the packet will be dropped.

A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Description : A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Last Answer : Answer: 4 

Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Description : Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Last Answer : b. Source address

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Description : The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Last Answer : C) Subnet number and host number.

2.address use 7 bits for the <network> and 24 bits for the <host> portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Description : 2.address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

List different classes of IP Address.

Description : List different classes of IP Address.

Last Answer : Different classes of IP address. Class A Class B Class C Class D Class E

State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Description : State the functions of i. Repeater ii. Switch iii. Gateway iv. Bridges

Last Answer : i) Repeater: Repeaters are used to take the distorted, weak and corrupt input signal and regenerate this signal at its output. It ensures that the signals are not distorted or weak before it ... and decides whether to forward or discard it. It sends packets between two networks of same type.

Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Description : Write the name of layers that perform the following functions in OSI : I. Data Encryption II. Error Correction III. File Transfer IV. Data Encoding

Last Answer : 1. Data Encryption-Presentation Layer 2. Error Correction-Data link layer and Transport layer 3. File Transfer-Application layer 4. Data Encoding-Presentation layer

Which field/s of ICMPv6 packet header has/have a provision of minimal integrity level concerning to verification for ICMP messages? a. Type b. Code c. Checksum d. All of the above

Description : Which field/s of ICMPv6 packet header has/have a provision of minimal integrity level concerning to verification for ICMP messages? a. Type b. Code c. Checksum d. All of the above

Last Answer : c. Checksum

State whether the following statement are true. i) An application-level gateway is often referred to as a proxy. ii) In proxy, a direct connection is established between the client and destination server. A) True, False B) False, True C) True, True D) False, False

Description : State whether the following statement are true. i) An application-level gateway is often referred to as a proxy. ii) In proxy, a direct connection is established between the client and destination server. A) True, False B) False, True C) True, True D) False, False

Last Answer : A) True, False