Pulse width modulation may be generated:

Pulse width modulation may be generated:
by

1 Answer

Answer :

with a monostable multivibrator
by

Related questions

A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Last Answer : PWM, PLM, PDM

Pulse – amplitude modulation signals are multiplexed by using

Description : Pulse – amplitude modulation signals are multiplexed by using

Last Answer : FET switches

The width of the vertical sync pulse in the Philippine TV system is

Description : The width of the vertical sync pulse in the Philippine TV system is

Last Answer : 3H

The width of the vertical sync pulse in the Philippine TV system is

Description : The width of the vertical sync pulse in the Philippine TV system is

Last Answer : 3H

n digital modulation, it is similar to standard amplitude modulation except there is only two amplitudes possible.

Description : n digital modulation, it is similar to standard amplitude modulation except there is only two amplitudes possible.

Last Answer : amplitude shift keying

In an AM transmitter with 100% modulation, the voltage of the final RF stage will be

Description : In an AM transmitter with 100% modulation, the voltage of the final RF stage will be

Last Answer : approximately four times the DC supply voltage

It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme

Description : It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme

Last Answer : Bandwidth efficiency, Information density, or Spectral efficiency

Which is not purpose of modulation?

Description : Which is not purpose of modulation?

Last Answer : Increase in signal power

Rate of change of a signal on a transmission medium after encoding and modulation have occurred

Description : Rate of change of a signal on a transmission medium after encoding and modulation have occurred

Last Answer : baud rate

A modulation technique where data rates in excess of 56 kbps can be achieved over telephone circuits

Description : A modulation technique where data rates in excess of 56 kbps can be achieved over telephone circuits

Last Answer : Trellis Code Modulation

The upper pulse rate and information carrying capacity of a cable is limited by:

Description : The upper pulse rate and information carrying capacity of a cable is limited by:

Last Answer : modal dispersion

Category of data transmission if the binary pulse is maintained for the entire bit time?

Description : Category of data transmission if the binary pulse is maintained for the entire bit time?

Last Answer : Return to zero

What is pulse-width modulation (PWM) in Arduino?

Description : What is pulse-width modulation (PWM) in Arduino?

Last Answer : Pulse-width modulation (PWM) in Arduino is a technique used to control the brightness of an LED or the speed of a motor by varying the duty cycle of a digital signal.

What is a pulse-width modulation (PWM) signal in Arduino?

Description : What is a pulse-width modulation (PWM) signal in Arduino?

Last Answer : A PWM signal in Arduino is a digital signal that varies the width of the pulse to simulate an analog signal.

What is Pulse Width Modulation?

Description : What is Pulse Width Modulation?

Last Answer : Ans-Pulse width modulation is a modulation technique in which the width of the pulse is varied in accordance with the message signal. Pulse width Modulation is abbreviated as PWM. PWM can be used ... the pulse train and recover an average analog waveform. PWM is used in sound synthesis circuits.

In single pulse modulation of PWM inverters, third harmonic can be eliminated if pulse width is

Description : In single pulse modulation of PWM inverters, third harmonic can be eliminated if pulse width is equal to   (a) 30o (b) 60o (c) 120o (d) 150o

Last Answer : In single pulse modulation of PWM inverters, third harmonic can be eliminated if pulse width is equal to 120o

What is mean by pulse width modulation?

Last Answer : PWM means the width of pulse signal can be varied by varying ton & tOFF.

The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.

Last Answer : Acceptance cone half-angle

A waveguide may also be terminated in a resistive load that is matched to the characteristic impedance of the waveguide. The resistive load is most often called a _____

Description : A waveguide may also be terminated in a resistive load that is matched to the characteristic impedance of the waveguide. The resistive load is most often called a _____

Last Answer : Dummy resistor

A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Last Answer : Answer : A

Type of modulation used in TV broadcast visual transmitter. A. Pulse modulation B. DSBFC C. Vestigial sideband D. SSBFC

Description : Type of modulation used in TV broadcast visual transmitter. A. Pulse modulation B. DSBFC C. Vestigial sideband D. SSBFC

Last Answer : C. Vestigial sideband

Which of the following systems is not used in radio detection and ranging? A. Frequency shift B. Frequency modulation C. Pulse radar D. Amplitude modulation

Description : Which of the following systems is not used in radio detection and ranging? A. Frequency shift B. Frequency modulation C. Pulse radar D. Amplitude modulation

Last Answer : D. Amplitude modulation

Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Description : Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Last Answer : A. Pulse modulation

ECE Board Exam March 1996 Which of the following pulse modulation systems is analog? A. Delta B. Differential PCM C. PWM D. PCM

Description : ECE Board Exam March 1996 Which of the following pulse modulation systems is analog? A. Delta B. Differential PCM C. PWM D. PCM

Last Answer : C. PWM

ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of pulse modulation is called A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Description : ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of ... A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Last Answer : A. pulse duration modulation

ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Description : ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Last Answer : A. frequency-shift keying

What is the primary advantage of pulse-modulation systems?

Description : What is the primary advantage of pulse-modulation systems?

Last Answer : . Low susceptibility to noise.

Pulse-code modulation requires the use of approximations of value that are obtained by what process?

Description : Pulse-code modulation requires the use of approximations of value that are obtained by what process?

Last Answer : Quantization.

What is pulse-frequency modulation?

Description : What is pulse-frequency modulation?

Last Answer : A method of pulse modulation in which a modulating wave is used to frequency modulate a pulse-generating circuit

What is the main disadvantage of pulse-position modulation?

Description : What is the main disadvantage of pulse-position modulation?

Last Answer : It requires synchronization between the transmitter and receiver.

Which edges of the pulse can be modulated in pulse duration modulation?

Description : Which edges of the pulse can be modulated in pulse duration modulation?

Last Answer : Either, or both at the same time.

What characteristics of a pulse can be changed in pulse time modulation?

Description : What characteristics of a pulse can be changed in pulse time modulation?

Last Answer : The time duration of the pulses or the time of occurrence of the pulses.

What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Last Answer : Both are susceptible to noise and interference

To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Description : To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Last Answer : 2.5 times the highest modulating frequency.

What action is necessary to impress intelligence on the pulse train in pulse modulation?

Description : What action is necessary to impress intelligence on the pulse train in pulse modulation?

Last Answer : Some characteristic of the pulses has to be varied.

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Define pulse modulation. State its types.

Description : Define pulse modulation. State its types. 

Last Answer : Pulse Modulation - consists essentially of sampling analog information signals and then converting those samples into discrete pulses. OR It consists essentially of sampling analog information signals and then converting those ... PAM - PWM - PPM  ii) Digital Pulse Modulation - PCM - DM - ADM 

Indicate which of the following pulse modulation is analog

Description : Indicate which of the following pulse modulation is analog  a) PCM b) DPCM c) PWM d) Delta

Last Answer : Indicate which of the following pulse modulation is analog  a) PCM b) DPCM c) PWM d) Delta

The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___

Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___

Last Answer : is horizontal

It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power

Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power

Last Answer : directive gain

The property of interchangeability for the transmitting and receiving operations is known as ____

Description : The property of interchangeability for the transmitting and receiving operations is known as ____

Last Answer : reciprocity

The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space

Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space

Last Answer : radiation field

It is the ratio of the radiated to the reflected energy:

Description : It is the ratio of the radiated to the reflected energy:

Last Answer : Radiation efficiency

It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates

Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates

Last Answer : . Radiation resistance

Plots of field strength or power density with respect to the value at a reference point.

Description : Plots of field strength or power density with respect to the value at a reference point.

Last Answer : relative radiation pattern

The radiation pattern plotted in terms of electric field strength or power density

Description : The radiation pattern plotted in terms of electric field strength or power density

Last Answer : absolute radiation pattern

The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____

Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____

Last Answer : line of shoot

A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated

Description : A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated

Last Answer : waveguide