Description : A transmission of binary data which involves the transmission of two non – zero voltage level
Last Answer : Bipolar
Description : It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme
Last Answer : Bandwidth efficiency, Information density, or Spectral efficiency
Description : For the 16-PSK and a transmission system with a 10kHz bandwidth, determine the maximum bit rate
Last Answer : 40,000 bps
Description : Sixteen different levels (symbols) are used to encode binary data. The channel bandwidth is 36 MHz. The maximum channel capacity is
Last Answer : 288 Mbps
Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.
Last Answer : PWM, PLM, PDM
Description : Classification of protocol that interprets a frame of data as a group of successive bit combined into predetermined pattern of fixed length, usually 8 bits each.
Last Answer : Character and Byte-oriented protocols
Description : The upper pulse rate and information carrying capacity of a cable is limited by:
Last Answer : modal dispersion
Description : The width of the vertical sync pulse in the Philippine TV system is
Last Answer : 3H
Description : Pulse width modulation may be generated:
Last Answer : with a monostable multivibrator
Description : Pulse – amplitude modulation signals are multiplexed by using
Last Answer : FET switches
Description : The characters making up the message in a synchronous transmission are collectively referred to as the data
Last Answer : block
Description : Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.
Last Answer : line speed
Description : A mode where the entire magnetic field is in the transverse plane and has no portion parallel to the length axis.
Last Answer : TM mode
Description : The phase relationship between signaling elements for BPSK is the optimum signaling format and occurs only when two binary signal levels are allowed and when one signal is the exact negative of the other
Last Answer : Antipodal signaling
Description : It is the symmetrical expectation of the bit error rate in the system.
Last Answer : probability of errors
Description : Used for transmission of PCM encoded time – division multiplexed digital signal.
Last Answer : T carriers
Description : A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated
Last Answer : waveguide
Description : The point on the antenna where the transmission line is connected is called _____
Last Answer : feedpoint
Description : A synchronous transmission usually begins with which character
Last Answer : SYN
Description : It involves converting standard logic levels to a form more suitable to telephone transmission lines
Last Answer : igital line encoding
Description : A synchronous transmission usually begins with which character?
Description : It is the transmission of information in any form from one source to one or more destination.
Last Answer : Multiplexing
Description : Synchronous transmission is used because:
Last Answer : no start and stop bits means higher efficiency
Description : Rate of change of a signal on a transmission medium after encoding and modulation have occurred
Last Answer : baud rate
Description : Ethernet is baseband transmission system designed by _____
Last Answer : Robert Metcalfe and David Boggs
Description : They experimented with light transmission cables through bundle of fibers and lead to the development of flexible fiberscope
Last Answer : Van Heel, Hopkins and Kapany
Description : __________ defines how a user gets control of the channel so as to allow transmission.
Last Answer : channel access
Description : does its best to get a transmission through to its destination, but with no guarantees
Last Answer : best-effort delivery
Description : Variation of biphase that is used for encoding SMPTE time code data and for recording on video tapes
Last Answer : Biphase – M
Description : In the ________ traffic model, the rate of the data flow changes in time, with the changes smooth instead of sudden and sharp.
Last Answer : variable bit rate
Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.
Last Answer : UDP
Description : _______ refers to the structure or format of the data, meaning the order in which they are presented.
Last Answer : Semantics
Description : A ________ is a set of rules that governs data communication
Last Answer : protocol
Description : It is proposed network designed by major telephone companies in conjunction with the ITU-T with the intent of providing worldwide telecommunications support for voice, data, video and facsimile information within the same networ
Last Answer : ISDN
Description : It is how the primary designates the secondary as the designation of recipient of data
Last Answer : Selection
Description : Set rules implementing and governing an orderly exchange of data between layers of two devices, such as line control units and front – end processors.
Last Answer : Data Link Protocol
Description : A modulation technique where data rates in excess of 56 kbps can be achieved over telephone circuits
Last Answer : Trellis Code Modulation
Description : Dividing the data block by a constant produces a remainder that is used for error detection.
Last Answer : Cyclic redundancy check
Description : A _______ is a connecting device that operates in the physical and data link layers of the Internet model.
Last Answer : bridge
Description : IEEE has defined the specifications for a wireless LAN, called _______, which covers the physical and data link layers.
Last Answer : . IEEE 802.11
Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?
Last Answer : 428
Description : The ________ is a function of three values: average data rate, peak data rate, and maximum burst size.
Last Answer : Effective bandwidth
Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor.
Last Answer : . transit time
Description : The PCM code for each channel occupies a fixed time slot called:
Last Answer : Epoch
Description : It is the procedure used to decide which device has the permission to transmit at any given time.
Last Answer : Line control
Description : The time it takes to transmit one TDM frame is called ______
Last Answer : Frame time
Description : In a ______ handoff, a mobile station can communicate with two base stations at the same time
Last Answer : . soft
Description : To prevent _________, we can timestamp the packets and separate the arrival time from the playback time
Last Answer : jitter
Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___
Last Answer : is horizontal