A bridge used to measure small resistances

A bridge used to measure small resistances
by

1 Answer

Answer :

Kelvin Bridge
by

Related questions

What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Description : What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Last Answer : Wein Bridge

What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Description : What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Last Answer : Wein Bridge

Bridge used to measure both inductive and capacitive impedances at higher frequencies

Description : Bridge used to measure both inductive and capacitive impedances at higher frequencies

Last Answer : radio-frequency bridge

What bridge is used to measure high-Q inductors? (Q>10)

Description : What bridge is used to measure high-Q inductors? (Q>10)

Last Answer : hay bridge

What is the difference the a wheatstone bridge and a potentiometer ?

Description : What is the difference the a wheatstone bridge and a potentiometer ?

Last Answer : The difference between a potentiometer and a wheatstone bridge measuring instrument is that potentiometer is a voltage measuring instrument and wheatstone bridge is a current measuring instrument. 

A dc bridge widely used for the accurate measurements of resistance

Description : A dc bridge widely used for the accurate measurements of resistance

Last Answer : Wheatstone bridge

When the capacitors of a Wein Bridge are replaced by inductors, the bridge becomes ___

Description : When the capacitors of a Wein Bridge are replaced by inductors, the bridge becomes ___

Last Answer : Wein Inductance Bridge

A wheatstone bridge is balanced if ___

Description : A wheatstone bridge is balanced if ___

Last Answer : the ratio of resistors on one side of the bridge equals the ratio of resistors on the other side

A simplified version of the Wheatstone bridge wherein, two of the ratio arms are replaced by a 100cm long Manganin of uniform cross-sections and provided with a slider

Description : A simplified version of the Wheatstone bridge wherein, two of the ratio arms are replaced by a 100cm long Manganin of uniform cross-sections and provided with a slider

Last Answer : slide-wire bridge

An AC bridge that measures capacitance and dissipation factor

Description : An AC bridge that measures capacitance and dissipation factor

Last Answer : Schering Bridge

A four-arm bridge. All arms of which are predominantly resistive; used for measuring resistance

Description : A four-arm bridge. All arms of which are predominantly resistive; used for measuring resistance

Last Answer : Resistance Bridge and Wheatstone Bridge

An AC bridge that measures inductance in terms of resistance and capacitance.

Description : An AC bridge that measures inductance in terms of resistance and capacitance.

Last Answer : Owen's Bridge

A bridge used to locate accidental grounds on communications and power lines

Description : A bridge used to locate accidental grounds on communications and power lines

Last Answer : Murray Loop

This refers to a four-arm ac bridge used for measuring inductance against a standard capacitance.

Description : This refers to a four-arm ac bridge used for measuring inductance against a standard capacitance.

Last Answer : Maxwell Bridge

An AC bridge that measures mutual inductance

Description : An AC bridge that measures mutual inductance

Last Answer : Heaviside bridge

Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Description : Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Last Answer : hay bridge

Maxwell bridge measures an unknown inductance in terms of known

Description : Maxwell bridge measures an unknown inductance in terms of known

Last Answer : capacitance

A bridge wherein all legs are electrically identical

Description : A bridge wherein all legs are electrically identical

Last Answer : balance bridge

Kelvin's double bridge is used to measure low resistances because

Last Answer : Kelvin's double bridge is used to measure low resistances because effect of contact and lead resistances is eliminated.

What type of sensing element would you use to measure very low temperature ?

Description : What type of sensing element would you use to measure very low temperature ?

Last Answer : The sensing element used for measuring very low temperature is R. T. D. ( Resistance Temperature Detector )

An electrodynamic meter used t measure power

Description : An electrodynamic meter used t measure power

Last Answer : wattmeter

___ ammeter is used to measure high-frequency currents.

Description : ___ ammeter is used to measure high-frequency currents.

Last Answer : thermocouple

In RF and microwave system, what instrument is used to measure the incidental and reflected signals?

Description : In RF and microwave system, what instrument is used to measure the incidental and reflected signals?

Last Answer : reflectometer

A type of photometer used to measure reflection.

Description : A type of photometer used to measure reflection.

Last Answer : reflectometer

A measure of consistency or repeatability of measurements is called. ___

Description : A measure of consistency or repeatability of measurements is called. ___

Last Answer : precision

An electro pyrometer is an instrument used to measure?

Description : An electro pyrometer is an instrument used to measure?

Last Answer : high temperatures

An instrument used to detect and measure the presence of electrical current is generally called

Description : An instrument used to detect and measure the presence of electrical current is generally called

Last Answer : galvanometer

A device used to mechanically measure the output power of a motor

Description : A device used to mechanically measure the output power of a motor

Last Answer : dynamometer

For a dynamometer to be able to measure high current, a ___ should be used.

Description : For a dynamometer to be able to measure high current, a ___ should be used.

Last Answer : current transformer

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

A small swamping resistance is connected in series with operating coil of a moving coil ammter in order to compensate for the effects of ____

Description : A small swamping resistance is connected in series with operating coil of a moving coil ammter in order to compensate for the effects of ____

Last Answer : temperature variation

A meter when __ will become insensitive to small signals

Description : A meter when __ will become insensitive to small signals

Last Answer : overdamped

Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. When a resistance `15 Omega` is conne

Description : Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. When a resistance `15 Omega` is conne

Last Answer : Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. ... the value. A. 3 B. 6 C. 9 D. 12

If an inductance is connected in one arm of bridge and resistances in the remaining three arms?

Last Answer : If an inductance is connected in one arm of bridge and resistances in the remaining three arms the bridge cannot be balanced.

What is a filter used for ?

Description : What is a filter used for ?

Last Answer : The half wave and full wave signals are pulsating D . C . voltages. The use of such voltages is limited to charging batteries, running D. C. motors, and a few other applications. What we really ... voltage from a battery. To get a constant voltage from this, we can use a capacitor input filter. 

What is Zener Diode ? What is a voltage Regulator ?

Description : What is Zener Diode ? What is a voltage Regulator ?

Last Answer : The breakdown region of a p n diode can be made very sharp and almost vertical Diodes with almost vertical breakdown region are known as Zever Diodes. A Zener diodes operating in the breakdown ... VOLTAGE REGULATOR : The output remains constant despite changes in input voltage due to Zever effect.  

What is transistor ? What are the different types ?

Description : What is transistor ? What are the different types ?

Last Answer : A transistor is a three lagged semi conductor device. Basically a transistor means (transfer - resister). Whether the transistor is pnp or npn it resembles two diodes (back to back). The one of the left ... transistor : Emitter - Base - Forward Bias. Collector - Base - Reverse Bias. 

What is CB, CE and CC configuration ?

Description : What is CB, CE and CC configuration ?

Last Answer : Buffer : A device or a circuit used to isolate two pt'ne circuits or stages. The emitter follows is a example of buffer. Alpha = IC / IE Beta = IC / IB

How will you test a transistor with a multimeter. ?

Description : How will you test a transistor with a multimeter. ?

Last Answer : 1. Emitter +ve of meter and Base -ve output = Low resistance 2. Emitter -ve of meter and base +ve output = High resistance. 3. Collector +ve and Base -ve output = Low. 4. Collector -ve and base +ve output = High. Emitter : Collector = High Resistance. PNP : Opposite Results. 

What is a thyristor ? What are its uses ?

Description : What is a thyristor ? What are its uses ?

Last Answer : A thyristor is a special kind of semi conductor device that uses internal feedback to produce latching action. Use : Used for controlling large amounts of load power in motors, heaters, lighting systems etc ... the latches like a open switch. This latch will always stay in open or close position.  

What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ?

Description : What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ? 

Last Answer : The transmitter output stance from what is known as "live zero". This system has specific advantages : 1. The systems automatically alarms when the signal system becomes inoperative. ... transmitter operating, but transmitting a zero measurement and a failure, in the signal system. 

What are Intrinsically safe system ?

Description : What are Intrinsically safe system ?

Last Answer : Intrinsic safety is a technique for designing electrical equipment for safe use in locations made hazardous by the presence of flammable gas or vapors in air. "Defn. :" Intrinsically safe circuit is ... , unfortunately, been adopted in all countries. However two sets of codes in common use are.  

What is feed back control ? What is feed forward control ? Discuss its application ?

Description : What is feed back control ? What is feed forward control ? Discuss its application ?

Last Answer : Feed back control: Feed back control involves the detection of the controlled variable and counteracting of charges its it's value relative to set point, by adjustment of a manipulated ... controller for a particular process application, two factors time and gain must be considered.    

What is Furnace Draft control ?

Description : What is Furnace Draft control ? 

Last Answer : Balanced draft boilers are generally used negative furnace pressure. When both forced draft and induced draft are used together, at some point in the system the pressure will be the same as that of atmosphere. ... have is a very slight (about 0.1" H20 ) negative pressure of the top of furnace.  

What is the specialty of thermocouples lead wires ?

Description : What is the specialty of thermocouples lead wires ?

Last Answer : They should be of the same material as the thermocouple.  

What are skin temperature thermocouples ?

Description : What are skin temperature thermocouples ? 

Last Answer : Skin thermocouples are those which are directly connected to the process without any thermowell. Used for measuring the skin temperature of heaters furnaces, flue gas etc.  

How will you calibrate a temp. recorder using a potentiometer ?

Description : How will you calibrate a temp. recorder using a potentiometer ?

Last Answer : Connect the potentiometer output to the input of temp. recorder. 1. Connect the ( +ve ) to the ( +ve ) and ( -ve ) to the ( -ve ). 2. If ambient compensation is provided ... ambient temp. millvolts to the corr. input millvolts measured. Find out from the chart for the corresponding temperature. 

Why are Thermowells used ?

Description : Why are Thermowells used ?

Last Answer : In numerous application it is neither desirable nor practical to expose a temperature sensor directly to a process material. Wells are therefore used to protect against damage corrosion, erosion, abrasion and high pressure processes. A ... 3. Monel. 4. Alloy steal. 5. Hastelloy 'C'.

Why is a converter used in a temp. recorder ?

Description : Why is a converter used in a temp. recorder ? 

Last Answer : The converter is designed to convert D. C. input voltage into an A. C. input voltage proportional in amplitude to the input.