What type of sensing element would you use to measure very low temperature ?

1 Answer

Answer :

The sensing element used for measuring very low temperature is R. T. D. ( Resistance Temperature Detector )

Related questions

Description : A sensing element that provides a dc voltage less than 10mV with typical power range of 0.1 to 100mW

Last Answer : thermal converters

Description : Is a nucleonic sensing method employing usually one or more radioisotope sources and radiation detectors.

Last Answer : Radiation sensing

Description : A type of photometer used to measure reflection.

Last Answer : reflectometer

Description : An electrodynamic meter used t measure power

Last Answer : wattmeter

Description : ___ ammeter is used to measure high-frequency currents.

Last Answer : thermocouple

Description : In RF and microwave system, what instrument is used to measure the incidental and reflected signals?

Last Answer : reflectometer

Description : Bridge used to measure both inductive and capacitive impedances at higher frequencies

Last Answer : radio-frequency bridge

Description : A measure of consistency or repeatability of measurements is called. ___

Last Answer : precision

Description : A bridge used to measure small resistances

Last Answer : Kelvin Bridge

Description : An electro pyrometer is an instrument used to measure?

Last Answer : high temperatures

Description : What bridge is used to measure high-Q inductors? (Q>10)

Last Answer : hay bridge

Description : An instrument used to detect and measure the presence of electrical current is generally called

Last Answer : galvanometer

Description : A device used to mechanically measure the output power of a motor

Last Answer : dynamometer

Description : For a dynamometer to be able to measure high current, a ___ should be used.

Last Answer : current transformer

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

Description : An element in electronics which serves as a protection against overload?

Last Answer : fuse

Description : What CRT element provides for controls of the number of electrons passing father into the tube?

Last Answer : control grid

Description : An element of a CRT, that releases electrons when heated indirectly by a filament

Last Answer : cathode

Description : The time interval that a waveform is high (or low) is the ___ of the signal.

Last Answer : pulse width

Description : It consists of a diode and an opamp and has the ability to clip low level signals

Last Answer : precision diode

Description : What are skin temperature thermocouples ? 

Last Answer : Skin thermocouples are those which are directly connected to the process without any thermowell. Used for measuring the skin temperature of heaters furnaces, flue gas etc.  

Description : In a moving coil ammeter, a ___ is connected in series with the coil to compensate for temperature variations

Last Answer : swamping resistors

Description : Induction type instruments are mostly used as ___

Last Answer : watt-hour meter

Description : Type of power-line frequency meter composed of vibrating iron reed placed in alternating magnetic field

Last Answer : Vibrating Reed Type

Description : Type of waveform generated by the sweep generator of the CRT

Last Answer : sawtooth

Description : Type of power-line frequency meter device utilizing a principle of balancing an indicator needle at center of a scale using magnetic fields opposing each other.

Last Answer : magnetic type

Description : Generally, oscilloscope uses what type of deflection?

Last Answer : electrostatic deflection

Description : A type of meter that gives a precise reading of voltage, current or resistance where there is the generation of samples at the input and then feeds it to a digital read-out.

Last Answer : DMM

Description : Which is the best type of ammeter movement?

Last Answer : D'Arsonval

Description : What is the most common type of meter movement?

Last Answer : D' Arsonval

Description : The zero-adjust control in an analog type ohmmeter is used to

Last Answer : compensate for the differing internal battery voltage

Description : Dynamometer type instrument can be used for

Last Answer : both dc and ac works

Description : What type of instrument is the watt-hour meter?

Last Answer : an integrating

Description : The only use of voltage senstive meter movement

Last Answer : very low voltage measurement

Description : Types of oscilloscopes that are able to retain the display for a longer period of analysis. This display is retained by the use of flood gun.

Last Answer : storage oscilloscope

Description : What is a filter used for ?

Last Answer : The half wave and full wave signals are pulsating D . C . voltages. The use of such voltages is limited to charging batteries, running D. C. motors, and a few other applications. What we really ... voltage from a battery. To get a constant voltage from this, we can use a capacitor input filter. 

Description : What is Zener Diode ? What is a voltage Regulator ?

Last Answer : The breakdown region of a p n diode can be made very sharp and almost vertical Diodes with almost vertical breakdown region are known as Zever Diodes. A Zener diodes operating in the breakdown ... VOLTAGE REGULATOR : The output remains constant despite changes in input voltage due to Zever effect.  

Description : What is transistor ? What are the different types ?

Last Answer : A transistor is a three lagged semi conductor device. Basically a transistor means (transfer - resister). Whether the transistor is pnp or npn it resembles two diodes (back to back). The one of the left ... transistor : Emitter - Base - Forward Bias. Collector - Base - Reverse Bias. 

Description : What is CB, CE and CC configuration ?

Last Answer : Buffer : A device or a circuit used to isolate two pt'ne circuits or stages. The emitter follows is a example of buffer. Alpha = IC / IE Beta = IC / IB

Description : How will you test a transistor with a multimeter. ?

Last Answer : 1. Emitter +ve of meter and Base -ve output = Low resistance 2. Emitter -ve of meter and base +ve output = High resistance. 3. Collector +ve and Base -ve output = Low. 4. Collector -ve and base +ve output = High. Emitter : Collector = High Resistance. PNP : Opposite Results. 

Description : What is a thyristor ? What are its uses ?

Last Answer : A thyristor is a special kind of semi conductor device that uses internal feedback to produce latching action. Use : Used for controlling large amounts of load power in motors, heaters, lighting systems etc ... the latches like a open switch. This latch will always stay in open or close position.  

Description : What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ? 

Last Answer : The transmitter output stance from what is known as "live zero". This system has specific advantages : 1. The systems automatically alarms when the signal system becomes inoperative. ... transmitter operating, but transmitting a zero measurement and a failure, in the signal system. 

Description : What are Intrinsically safe system ?

Last Answer : Intrinsic safety is a technique for designing electrical equipment for safe use in locations made hazardous by the presence of flammable gas or vapors in air. "Defn. :" Intrinsically safe circuit is ... , unfortunately, been adopted in all countries. However two sets of codes in common use are.  

Description : What is feed back control ? What is feed forward control ? Discuss its application ?

Last Answer : Feed back control: Feed back control involves the detection of the controlled variable and counteracting of charges its it's value relative to set point, by adjustment of a manipulated ... controller for a particular process application, two factors time and gain must be considered.    

Description : What is Furnace Draft control ? 

Last Answer : Balanced draft boilers are generally used negative furnace pressure. When both forced draft and induced draft are used together, at some point in the system the pressure will be the same as that of atmosphere. ... have is a very slight (about 0.1" H20 ) negative pressure of the top of furnace.  

Description : What is the difference the a wheatstone bridge and a potentiometer ?

Last Answer : The difference between a potentiometer and a wheatstone bridge measuring instrument is that potentiometer is a voltage measuring instrument and wheatstone bridge is a current measuring instrument. 

Description : What is the specialty of thermocouples lead wires ?

Last Answer : They should be of the same material as the thermocouple.  

Description : How will you calibrate a temp. recorder using a potentiometer ?

Last Answer : Connect the potentiometer output to the input of temp. recorder. 1. Connect the ( +ve ) to the ( +ve ) and ( -ve ) to the ( -ve ). 2. If ambient compensation is provided ... ambient temp. millvolts to the corr. input millvolts measured. Find out from the chart for the corresponding temperature. 

Description : Why are Thermowells used ?

Last Answer : In numerous application it is neither desirable nor practical to expose a temperature sensor directly to a process material. Wells are therefore used to protect against damage corrosion, erosion, abrasion and high pressure processes. A ... 3. Monel. 4. Alloy steal. 5. Hastelloy 'C'.