What three cells use the same electrolyte?

What three cells use the same electrolyte?
by

1 Answer

Answer :

Silver-cadmium, silver-zinc, and nickel-cadmium
by

Related questions

What three cells use the same electrolyte?

Description : What three cells use the same electrolyte?

Last Answer : Silver-cadmium, silver-zinc, and nickel-cadmium.

In the illustration, the component labeled 'G' _________. EL-0031 A. is lined with cardboard to maintain a moisture (electrolyte) barrier between cells B. is a one piece container with compartments for each individual cell C. must be UL approved for shipboard use D. can only contain one cell

Description : In the illustration, the component labeled 'G' _________. EL-0031 A. is lined with cardboard to maintain a moisture (electrolyte) barrier between cells B. is a one piece container with compartments for each individual cell C. must be UL approved for shipboard use D. can only contain one cell

Last Answer : Answer: B

When troubleshooting an alkaline storage battery a weak or dead cell is best located by ____________. A. checking the specific gravity of each cell B. visually inspecting each cell's electrolyte level C. testing each cell with a voltmeter D. measuring the electrolyte temperature with an accurate mercury thermometer

Description : When troubleshooting an alkaline storage battery a weak or dead cell is best located by ____________. A. checking the specific gravity of each cell B. visually inspecting each cell's ... testing each cell with a voltmeter D. measuring the electrolyte temperature with an accurate mercury thermometer

Last Answer : Answer: C

When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit voltage test of individual cells C. visually inspecting the electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer

Description : When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit ... electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer

Last Answer : Answer: A

When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in the electrolyte B. any water that has been previously added to the cells will dilute the solution and give a false reading C. a hydrometer reading is inaccurate if taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Description : When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in ... taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Last Answer : Answer: C

A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a given temperature D. specific gravity of all cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Description : A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a ... cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Last Answer : Answer: D

Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and discharged only a limited number of times without damage to the cells. C. Nickel-cadmium batteries can be stored for a long time and still keep a full charge without additional charging. D. The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Description : Which of the following statements concerning nickel-cadmium batteries is true? A. When mixing electrolyte always add acid to the water. B. Nickel-cadmium batteries can be charged and ... The electrolyte of an idle nickel-cadmium battery must be replaced monthly to maintain battery condition.

Last Answer : Answer: C

The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery

Description : The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery

Last Answer : Answer: D

The freezing point of the electrolyte in a fully charged lead-acid battery will be _____________. A. higher than in a discharged battery B. lower than in a discharged battery C. the same as in a discharged battery D. higher than in a discharged battery, but the specific gravity will be less

Description : The freezing point of the electrolyte in a fully charged lead-acid battery will be _____________. A. higher than in a discharged battery B. lower than in a discharged battery C. the same as in a discharged battery D. higher than in a discharged battery, but the specific gravity will be less

Last Answer : Answer: B

What are the three ways of combining cells, and what is each used for?

Description : What are the three ways of combining cells, and what is each used for?

Last Answer : Series, to increase voltage but not current. Parallel, to increase current but not voltage. Series-Parallel, to increase both current and

Drycell Electrolyte As What? Use To do Is it

Last Answer : electrolyte As Ammonium Chloride Of Paste Use To do Is.

Why is ethanol not use as an electrolyte?

Description : Why is ethanol not use as an electrolyte?

Last Answer : Ethanol is not dissociated in ions in water.

A 47-year-old patient undergoing a complicated laparotomy for bowel obstruction develops a postoperative enterocutaneous fistula. Which of the following statement(s) is/are true concerning parenteral nutritional support in the postoperative period? a. Oral intake can result in severe dehydration, electrolyte abnormalities, and perifistula skin injury b. Total parenteral nutrition increases the spontaneous closure rate of intestinal fistula c. Total parenteral nutrition decreases mortality rate in patients with intestinal fistulas d. The use of TPN better prepares the patient for surgery if surgical intervention proves necessary

Description : A 47-year-old patient undergoing a complicated laparotomy for bowel obstruction develops a postoperative enterocutaneous fistula. Which of the following statement(s) is/are true concerning parenteral ... use of TPN better prepares the patient for surgery if surgical intervention proves necessary

Last Answer : Answer: a, b, d Patients with gastrointestinal-cutaneous fistulas represent the classical indication for TPN. In such patients, oral intake of food almost invariably results in increased ... treated more aggressively surgically after a defined period of nutritional support (unless closure occurs)

When mixing electrolyte, which of the following precautions should always be observed? A. Add the acid to the water. B. Use a heavy duty aluminum pail. C. Add the water to the acid. D. Mix the solution outdoors.

Description : When mixing electrolyte, which of the following precautions should always be observed? A. Add the acid to the water. B. Use a heavy duty aluminum pail. C. Add the water to the acid. D. Mix the solution outdoors.

Last Answer : Answer: A

To determine the state of charge of a nickel-cadmium battery, you should ___________. A. check the electrolyte with a hydrometer B. use the constant specific gravity method C. use a nonbreakable mercury thermometer D. connect a voltmeter to the battery terminals

Description : To determine the state of charge of a nickel-cadmium battery, you should ___________. A. check the electrolyte with a hydrometer B. use the constant specific gravity method C. use a nonbreakable mercury thermometer D. connect a voltmeter to the battery terminals

Last Answer : Answer: D

You use a hydrometer to check the condition of the electrolyte in your car battery. It is actually measuring what property of the fluid? w) charge x) density y) temperature z) surface tension

Description : You use a hydrometer to check the condition of the electrolyte in your car battery. It is actually measuring what property of the fluid? w) charge x) density y) temperature z) surface tension 

Last Answer : ANSWER: X -- DENSITY

What is not the cause of low conductivity of electrolyte? -Do You Know?

Description : What is not the cause of low conductivity of electrolyte? -Do You Know?

Last Answer : answer:

Which of the following is an electrolyte solution?

Description : Which of the following is an electrolyte solution?

Last Answer : The answer is "Ions in water" on Apex

1.0 molal aqueous solution of an electrolyte `"A"_(2)"B"_(3)` is 60% ionised. The boiling point of the solution at 1 atm is `("K"_("b"("H"_(2)"O"))=0.

Description : 1.0 molal aqueous solution of an electrolyte `"A"_(2)"B"_(3)` is 60% ionised. The boiling point of the solution at 1 atm is `("K"_("b"("H"_(2)"O"))=0.

Last Answer : 1.0 molal aqueous solution of an electrolyte `"A"_(2)"B"_(3)` is 60% ionised. The boiling point of the solution at ... C. `376. 4 K` D. ` 374 . 76 K`

On adding excess electrolyte what happens to the collides :-

Description : On adding excess electrolyte what happens to the collides :-

Last Answer : On adding excess electrolyte what happens to the collides :- A. Coagulates B. Dissolves C. Peptizes D. Disperses

Effective electrolyte to cause the flocculation of a negatively charged arsenium sulphide colloid is :

Description : Effective electrolyte to cause the flocculation of a negatively charged arsenium sulphide colloid is :

Last Answer : Effective electrolyte to cause the flocculation of a negatively charged arsenium sulphide colloid is : A. `NaCl` B. ` ... 3)Fe(CN)_(6)` D. `AlCl_(3)`

The minimum concentration of an electrolyte required to cause coagulation of a sol is called its flocculation value. It is expressed in millimoles per

Description : The minimum concentration of an electrolyte required to cause coagulation of a sol is called its flocculation value. It is expressed in millimoles per

Last Answer : The minimum concentration of an electrolyte required to cause coagulation of a sol is called its ... )` sol so that flocculation just starts ?

For the just coagultion of 250 mL of `Fe(OH)_(3)` sol, 2 mL of `1 M Na_(2)SO_(4)` electrolyte is required. What is the coagulating value of `Na_(2)SO_

Description : For the just coagultion of 250 mL of `Fe(OH)_(3)` sol, 2 mL of `1 M Na_(2)SO_(4)` electrolyte is required. What is the coagulating value of `Na_(2)SO_

Last Answer : For the just coagultion of 250 mL of `Fe(OH)_(3)` sol, 2 mL of `1 M Na_(2)SO_(4)` ... What is the coagulating value of `Na_(2)SO_(4)` electrolyte.

Hormone of adresal cortex which helps in maintaining electrolyte and body fluid volume is

Description : Hormone of adresal cortex which helps in maintaining electrolyte and body fluid volume is

Last Answer : Hormone of adresal cortex which helps in maintaining electrolyte and body fluid volume is

hormone responsible for reabsorption of water and electrolyte to reduce loss of water is

Description : hormone responsible for reabsorption of water and electrolyte to reduce loss of water is

Last Answer : hormone responsible for reabsorption of water and electrolyte to reduce loss of water is

In the commercial electrochemical process for aluminium extraction, the electrolyte used is

Description : In the commercial electrochemical process for aluminium extraction, the electrolyte used is

Last Answer : In the commercial electrochemical process for aluminium extraction, the electrolyte used is A. `Al(OH)_(3)`in NaOH ... of AlO (OH) and `Al(OH)_(3)`

Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Coke power is spreased over the

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Coke power is spreased over the

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe ... aluminmum by air D. (A) and (B) both

Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite) ` Cathode : fraphite inside Fe -Container The purpose of adding cryolite

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite) ` Cathode : fraphite inside Fe -Container The purpose of adding cryolite

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite) ` Cathode : fraphite inside ... the impurities as slag D. Both (a) & (B)

Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Pick out the statement which is

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Pick out the statement which is

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite ... 2)` D. nikkel may be affected at high temperature

Statement - 1 : `PbSiF_(6) + H_(2) SiF_(6)` + gelatine is taken as electrolyte in electrolytic refining of lead . Statement -2 : Discharge potential o

Description : Statement - 1 : `PbSiF_(6) + H_(2) SiF_(6)` + gelatine is taken as electrolyte in electrolytic refining of lead . Statement -2 : Discharge potential o

Last Answer : Statement - 1 : `PbSiF_(6) + H_(2) SiF_(6)` + gelatine is taken as electrolyte in electrolytic ... Statement-1 : is false , statement-2 : is true

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. Coke powder is spreadded over the molten electro

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... of molten aluminium by air D. (a) both (b)

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. The purpose of adding crylite is :

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. The purpose of adding crylite is :

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. ... . to increase melting point of `Al_(2)O_(3)`

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite ... CO D. Nickel May be affected by high temperature.

The major role of fluorpar (`CaF_2` ) which added in small quantities in the electrolyte reduction of alumina dissolved in fused cryolite `(N_(3)AlF_(

Description : The major role of fluorpar (`CaF_2` ) which added in small quantities in the electrolyte reduction of alumina dissolved in fused cryolite `(N_(3)AlF_(

Last Answer : The major role of fluorpar (`CaF_2` ) which added in small quantities in the electrolyte reduction ... the rate of oxidation of carbon at the anode

In the commercial electrochemical process for aluminium extraction, the electrolyte used is

Description : In the commercial electrochemical process for aluminium extraction, the electrolyte used is

Last Answer : In the commercial electrochemical process for aluminium extraction, the electrolyte used is A. `Al(OH)_(2)` is NaOH ... Al_(2)O_(3)` and `Al(OH)_(3)`

In the electrolysis of silver chloride, a charge of `4xx10^(5)` C is flowing through the electrolyte. Calculate the number of silver `(Ag^(+))` ions f

Description : In the electrolysis of silver chloride, a charge of `4xx10^(5)` C is flowing through the electrolyte. Calculate the number of silver `(Ag^(+))` ions f

Last Answer : In the electrolysis of silver chloride, a charge of `4xx10^(5)` C is flowing through the electrolyte. ... silver `(Ag^(+))` ions flowing through it.

A 50% solution of sulphuric acid is subjected to electrolyte oxidation and the product is hydrolysed.

Description : A 50% solution of sulphuric acid is subjected to electrolyte oxidation and the product is hydrolysed.

Last Answer : Write balanced chemical equations : A 50% solution of sulphuric acid is subjected to electrolyte oxidation and the product is hydrolysed.

Is H2 an electrolyte?

Description : Is H2 an electrolyte?

Last Answer : Tne molecule is not an electrolyte.

What type of electrolyte imbalance can be caused by diuretics?

Description : What type of electrolyte imbalance can be caused by diuretics?

Last Answer : Feel Free to Answer

Is sugar solution is electrolyte or not?

Description : Is sugar solution is electrolyte or not?

Last Answer : Sugar solution is not an electrolyte.

All the following changes in blood chemistry can occur in severe diarrhoea except (A) Decreased pH (B) Decreased bicarbonate (C) Increased pCO2 (D) Increased chloride WATER AND ELECTROLYTE BALANCE 287

Description : All the following changes in blood chemistry can occur in severe diarrhoea except (A) Decreased pH (B) Decreased bicarbonate (C) Increased pCO2 (D) Increased chloride WATER AND ELECTROLYTE BALANCE 287

Last Answer : Answer : C

Colloid osmotic pressure of intracellular fluid is (A) Equal to that of plasma (B) More than that of plasma (C) More than that of plasma (D) Nearly zero WATER AND ELECTROLYTE BALANCE 285

Description : Colloid osmotic pressure of intracellular fluid is (A) Equal to that of plasma (B) More than that of plasma (C) More than that of plasma (D) Nearly zero WATER AND ELECTROLYTE BALANCE 285

Last Answer : Answer : B

One of the symptoms of low serum potassium concentration includes (A) Muscle weakness (B) Confusion (C) Numbness (D) Tingling of extremities WATER AND ELECTROLYTE BALANCE 283

Description : One of the symptoms of low serum potassium concentration includes (A) Muscle weakness (B) Confusion (C) Numbness (D) Tingling of extremities WATER AND ELECTROLYTE BALANCE 283

Last Answer : Answer : A

Normal total serum calcium level varies between (A) 4–5 mg (B) 9–11 mg (C) 15–20 mg (D) 50–100 mg WATER AND ELECTROLYTE BALANCE 281

Description : Normal total serum calcium level varies between (A) 4–5 mg (B) 9–11 mg (C) 15–20 mg (D) 50–100 mg WATER AND ELECTROLYTE BALANCE 281

Last Answer : Answer : B

The emf of a primary cell depends upon the: a) Physical dimension of the cell b) Nature of the electrolyte c) Nature of the electrode d) Both (b) and (c)

Description : The emf of a primary cell depends upon the: a) Physical dimension of the cell b) Nature of the electrolyte c) Nature of the electrode d) Both (b) and (c)

Last Answer : Ans: D

During electrolysis, the cations and anions of the electrolyte are 1. Discharged 2. Hydrolysed 3. In motion 4. Hydrated The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Description : During electrolysis, the cations and anions of the electrolyte are 1. Discharged 2. Hydrolysed 3. In motion 4. Hydrated The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans:(a)

In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

Description : In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : (3) cathode Explanation: In electro-refining, the anodes consist of unrefined impure metal, and as the current passes through the acidic electrolyte the anodes are corroded into the solution so ... pure metal onto the cathodes. Electrolytic refining is used to extract impurities from crude metals.

The degree of dissociation of an electrolyte depends on - (1) dilution (2) impurities (3) atmospheric pressure (4) method of dissolution

Description : The degree of dissociation of an electrolyte depends on - (1) dilution (2) impurities (3) atmospheric pressure (4) method of dissolution

Last Answer : (1) dilution Explanation: The extent to which an electrolyte dissociates into ions is known as degree of dissociation or ionization and depends upon the following factors: (1) Nature of the electrolyte, (2) Temperature, (3) Dilution, (4) nature of the solvent, and (e) presence of other ions.

Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid

Description : Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid

Last Answer : (1) Sulphuric acid Explanation: Dilute sulfuric acid (H2SO4) serves as the electrolyte in a lead-acid battery. Dilute sulfuric acid used for lead acid battery has ratio (to water) of 3:1 other components of the battery include: Lead peroxide (PbO2) and Sponge lead (Pb).

In the electroplating of gold, the electrolyte used is – (1) Gold chloride (2) Gold nitrate (3) Gold sulphate (4) Potassium aurocyanide

Description : In the electroplating of gold, the electrolyte used is – (1) Gold chloride (2) Gold nitrate (3) Gold sulphate (4) Potassium aurocyanide

Last Answer : (3) Gold sulphate Explanation: Gold plating is a method of depositing a thin layer of gold onto the surface of another metal, most often copper or silver (to make silver-gilt), ... sulfite based electrolyte. This product is environment and user friendly and moreover the electroplating rate is good.