What format of digital tape recording is normally used to record instrumentation or telemetry data?

What format of digital tape recording is normally used to  record instrumentation or telemetry data?
by

1 Answer

Answer :

Serial digital magnetic tape recording.
by

Related questions

What format of digital tape recording is normally used to store computer data?

Description : What format of digital tape recording is normally used to store computer data?

Last Answer : Parallel digital magnetic tape recording.

What format of digital tape recording takes a serial input stream of data pulses, breaks them up, and records them on more than one data track?

Description : What format of digital tape recording takes a serial input stream of data pulses, breaks them up, and records them on more than one data track?

Last Answer : Serial-parallel digital magnetic tape recording.

Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Description : Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Last Answer : Analog magnetic tape.

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

In digital magnetic tape recording, the series of recorded digital pulses can represent what three types of data?

Description : In digital magnetic tape recording, the series of recorded digital pulses can represent what three types of data?

Last Answer : a. Data used by digital computers. b. Pulsed squarewave signals. c. Digitized analog waveforms.

What three formats are used for digital magnetic tape recording?

Description : What three formats are used for digital magnetic tape recording?

Last Answer : 1) Serial, (2) parallel, and (3) serial-parallel.

Is a digital recording generated from an old vinyl record or tape invisible to copyright flags?

Description : Is a digital recording generated from an old vinyl record or tape invisible to copyright flags?

Last Answer : Quick NO not invisible. The copyright detection software works off the tunes themselves and tries to do pattern matching on the sound. So it may be an old LP or an old reel-to-reel recording that is your source, but if they can recognize the sound pattern, they will ding you.

The data recording format in most of the modern magnetic tape is A) 7-bit ASCII B) 7-bit EBCDIC C) 8-bit ASCII D) 8-bit EBCDIC

Description : The data recording format in most of the modern magnetic tape is A) 7-bit ASCII B) 7-bit EBCDIC C) 8-bit ASCII D) 8-bit EBCDIC

Last Answer : Answer : D

The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC

Description : The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC

Last Answer : 8-bit EBCDIC

The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC

Description : The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC

Last Answer : d. 8-bit EBCDIC

What category of digital tape recorder is used to record special signals with a bandwidth of less than 500 kHz?

Description : What category of digital tape recorder is used to record special signals with a bandwidth of less than 500 kHz?

Last Answer : Instrumentation digital tape recorders.

The use of telecommunication for automatic indicating or recording measurement at the distance from the measuring instrument. A. Monitoring B. Tracking C. Telemetry D. Telecommand

Description : The use of telecommunication for automatic indicating or recording measurement at the distance from the measuring instrument. A. Monitoring B. Tracking C. Telemetry D. Telecommand

Last Answer : C. Telemetry

What type of magnetic tape is used to record computer programs and data, and what are the additional thickness and quality standards for this type of tape?

Description : What type of magnetic tape is used to record computer programs and data, and what are the additional thickness and quality standards for this type of tape?

Last Answer : digital magnetic tape is for computer programs and data. Its base material is about 50% thicker. The tape’s surface must not have blemishes or coating flaws because losing even one digital data bit could ruin the recorded computer program or data.

What two preventive maintenance actions must you do regularly to increase magnetic head life and to ensure good tape recording and playback?

Description : What two preventive maintenance actions must you do regularly to increase magnetic head life and to ensure good tape recording and playback?

Last Answer : a. Keep the heads clean. b. Keep the heads demagnetized.

What are four types of tape errors that can degrade a magnetic recording system’s performance?

Description : What are four types of tape errors that can degrade a magnetic recording system’s performance?

Last Answer : Signal dropout, noise, skew, and level. Dropout is the most common.

Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Description : Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Last Answer : a. Computer-compatible digital tape recorders. b. Telemetry digital tape recorders. c. Instrumentation digital tape recorders

Which method of digital data encoding does NOT return the tape to neutral between pulses but, instead, saturates the tape positively or negatively as the incoming data changes between zero and one?

Description : Which method of digital data encoding does NOT return the tape to neutral between pulses but, instead, saturates the tape positively or negatively as the incoming data changes between zero and one?

Last Answer : Non-return-to-zero (NRZ) encoding.

Which digital data encoding method records a digital one as a positive pulse and a digital (zero) as a negative pulse and returns the tape to neutral between pulses?

Description : Which digital data encoding method records a digital one as a positive pulse and a digital (zero) as a negative pulse and returns the tape to neutral between pulses?

Last Answer : Return-to-zero (RZ) encoding.

Which digital data tape encoding method presets the magnetic tape to all zeros and then records digital ones onto the tape?

Description : Which digital data tape encoding method presets the magnetic tape to all zeros and then records digital ones onto the tape?

Last Answer : Return-to-bias (RB) encoding.

Which of the eight methods for encoding digital data onto magnetic tape is most widely used because it’s accurate, simple, and reliable?

Description : Which of the eight methods for encoding digital data onto magnetic tape is most widely used because it’s accurate, simple, and reliable?

Last Answer : Non-return-to-zero (NRZ) encoding.

Where online can I find FREE books-on-tape in MP3 or other digital format?

Description : Where online can I find FREE books-on-tape in MP3 or other digital format?

Last Answer : answer:http://librivox.org/ At LibriVox, volunteers record chapters of books in the public domain into digital audio (eg. mp3), and then make the audio files available to the world, for free ( ... the internet. Also, check your public library. I know several which offer audio books via the web.

Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Description : Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Last Answer : 35-dB RMS because the highest SNR can always record and reproduce the widest range of input signals.

The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Description : The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Last Answer : It amplifies the frequency-modulated output from the record oscillator and sends it to the record head.

The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Description : The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Last Answer : It takes the signal from the summing network, amplifies it, and sends it to the record head for recording.

What two types of record and reproduce electronics are used by magnetic tape recorders?

Description : What two types of record and reproduce electronics are used by magnetic tape recorders?

Last Answer : . a. Direct record (AM). b. Frequency modulation (FM).

____ is a data-centric middleware standard for device-to-device and machine-to-machine communication. A. Data Distribution Serviced (DDS) B. Advance Message Queuing Protocol (AMQP) C. Extensible Messaging and Presence Protocol (XMPP) D. Message Queue Telemetry Transport (MQTT)

Description : ____ is a data-centric middleware standard for device-to-device and machine-to-machine communication. A. Data Distribution Serviced (DDS) B. Advance Message Queuing Protocol (AMQP) C. Extensible Messaging and Presence Protocol (XMPP) D. Message Queue Telemetry Transport (MQTT)

Last Answer : A. Data Distribution Serviced (DDS) 

Power for the electronic digital multimeter is normally supplied by what internal power source?

Description : Power for the electronic digital multimeter is normally supplied by what internal power source?

Last Answer : Rechargeable batteries.

Why is it important to record the growth medium when recording data about an organism?

Description : Why is it important to record the growth medium when recording data about an organism?

Last Answer : Need answer

What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Description : What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Last Answer : Using an erase head is slow, and it may not completely erase the tape.

The amount of data that can be stored on a linear inch of tape is known by what term?

Description : The amount of data that can be stored on a linear inch of tape is known by what term?

Last Answer : Recording density.

The number of records contained within a block of data on magnetic tape is defined by the A) Block definition B) Record contain clause C) Blocking factor D) Record per block

Description : The number of records contained within a block of data on magnetic tape is defined by the A) Block definition B) Record contain clause C) Blocking factor D) Record per block

Last Answer : Answer : C

The number of records contained within a block of data on magnetic tape is defined by the a. Block definition b. Record contain clause c. Blocking factor d. Record per block factor

Description : The number of records contained within a block of data on magnetic tape is defined by the a. Block definition b. Record contain clause c. Blocking factor d. Record per block factor

Last Answer : c. Blocking factor

Can voice recording equipment be used to tape a concert?

Description : Can voice recording equipment be used to tape a concert?

Last Answer : It can be used for this purpose, but the quality may not be great. However, some concerts do not allow the use of recording equipment. Make sure you check this out or you may find yourself getting kicked out.

What are the advantages to recording DVR as opposed to tape?

Description : What are the advantages to recording DVR as opposed to tape?

Last Answer : DVR recordings can be searched much more quickly, and replaying or skipping parts are much easier.

Magnetic recording tape is most commonly made from _________.

Last Answer : Magnetic recording tape is most commonly made from ferric oxide.

______ is most commonly used for making magnetic recording tape.

Description : ______ is most commonly used for making magnetic recording tape.

Last Answer : Ferric oxide is most commonly used for making magnetic recording tape.

Convert cassette tape into mp3 format?

Description : Convert cassette tape into mp3 format?

Last Answer : This is a cheap and low quality way of doing it, but if you own a tape player with a headphone output and a pc with a mic input, you can plug them into each other and then play the tape whilst recording on your computer. If you catch my drift…

My Western Digital External Harddrive suddenly needs to be re-formatted and I already have 100gs of data on it. It says if I format it will erase all the data. I don't want to lose it. How do I get my computer to recognize it?

Description : My Western Digital External Harddrive suddenly needs to be re-formatted and I already have 100gs of data on it. It says if I format it will erase all the data. I don't want to lose it. How do I get my computer to recognize it?

Last Answer : Copy the data to another disk.

The satellite subsystem that monitors and controls the satellite is the A. propulsion subsystem B. power subsystem C. communications subsystem D. telemetry, tracking, and command subsystem

Description : The satellite subsystem that monitors and controls the satellite is the A. propulsion subsystem B. power subsystem C. communications subsystem D. telemetry, tracking, and command subsystem

Last Answer : D. telemetry, tracking, and command subsystem

The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Description : The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Last Answer : D. transponder

Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder

Description : Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder

Last Answer : D. Transponder

The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. A. Tracking B. Telemetry C. Telecommand D. Space telemetry

Description : The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. A. Tracking B. Telemetry C. Telecommand D. Space telemetry

Last Answer : C. Telecommand

The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Description : The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Last Answer : (D) All the above

What is the full form of UMTS? a) Universal Mobile Telephone System b) Ubiquitous Mobile Telephone System c) Ubiquitous Mobile Telemetry System d) Universal Machine Telemedicine System

Description : What is the full form of UMTS? a) Universal Mobile Telephone System b) Ubiquitous Mobile Telephone System c) Ubiquitous Mobile Telemetry System d) Universal Machine Telemedicine System

Last Answer : a) Universal Mobile Telephone System

MQTT stands for _____________ A. MQ Telemetry Things B. MQ Transport Telemetry C. MQ Transport Things D. MQ Telemetry Transport

Description : MQTT stands for _____________ A. MQ Telemetry Things B. MQ Transport Telemetry C. MQ Transport Things D. MQ Telemetry Transport

Last Answer : D. MQ Telemetry Transport

MQTT stands for _____________ a) MQ Telemetry Things b) MQ Transport Telemetry c) MQ Transport Things d) MQ Telemetry Transport

Description : MQTT stands for _____________ a) MQ Telemetry Things b) MQ Transport Telemetry c) MQ Transport Things d) MQ Telemetry Transport

Last Answer : d) MQ Telemetry Transport

MQTT stands for _____________ A. MQ Telemetry Things B. MQ Transport Telemetry C. MQ Transport Things D. MQ Telemetry Transport

Description : MQTT stands for _____________ A. MQ Telemetry Things B. MQ Transport Telemetry C. MQ Transport Things D. MQ Telemetry Transport

Last Answer : D. MQ Telemetry Transport 

Illustrate how telemetry tracking and command system used in satellite communication.

Description : Illustrate how telemetry tracking and command system used in satellite communication.

Last Answer : Telemetry, Tracking and Command (TT&C) Subsystem These systems are partly on the satellite and partly at the control earth station. They support the functions of the spacecraft management. Telemetry System ... pulse to the satellite. Then the satellite executes these commands.   OR  

In a PCM system of telemetry, the quantization noise depends on:

Description : In a PCM system of telemetry, the quantization noise depends on:  (1) The sampling rate and quantization level (2) The sampling rate only (3) The number of quantization level (4) Information provided is not sufficient

Last Answer : In a PCM system of telemetry, the quantization noise depends on: The number of quantization level.

How would you normally format a testimonial?

Description : How would you normally format a testimonial?

Last Answer : Find out who you are writing to, if you don’t know. To whom it may concern is fine. Just say right away who you are and in what regards you are writing for.