Description : Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder
Last Answer : D. Transponder
Description : The satellite subsystem that monitors and controls the satellite is the A. propulsion subsystem B. power subsystem C. communications subsystem D. telemetry, tracking, and command subsystem
Last Answer : D. telemetry, tracking, and command subsystem
Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals
Last Answer : B. bandpass filter
Description : What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder
Last Answer : C. TTC
Description : What is the quardband between transponder channels in the commercial C-band for satellite communications? A. 6 MHz B. 36 MHz C. 4 MHz D. 2 MHz
Last Answer : C. 4 MHz
Description : ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste
Last Answer : B. Communications satellite
Description : Which of the following satellite subsystem provides stabilization in orbit and senses changes in orientation? A. Attitude control subsystem B. TTC C. AKM D. Transponder
Last Answer : A. Attitude control subsystem
Description : Illustrate how telemetry tracking and command system used in satellite communication.
Last Answer : Telemetry, Tracking and Command (TT&C) Subsystem These systems are partly on the satellite and partly at the control earth station. They support the functions of the spacecraft management. Telemetry System ... pulse to the satellite. Then the satellite executes these commands. OR
Description : The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. A. Tracking B. Telemetry C. Telecommand D. Space telemetry
Last Answer : C. Telecommand
Description : Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder
Last Answer : A. Communication satellite
Description : Essentially a satellite ___________ is a radio repeater in the sky A. transponder B. comparator C. duplexer D. billboard
Last Answer : A. transponder
Description : A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound
Last Answer : B. Downlink
Description : What is the first passive satellite transponder? A. Sun B. Early Bird C. Score D. Moon
Last Answer : B. Early Bird
Description : What is the data rate in Mbps of a single satellite transponder considering an S/N of 30 dB? A. 35.8 B. 3.58 C. 358 D. 3580
Last Answer : C. 358
Description : What is the typical satellite transponder bandwidth? A. 24 MHz B. 500 MHz C. 36 MHz D. 48 MHz
Last Answer : C. 36 MHz
Description : Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized
Last Answer : B. Down link
Description : The first passive satellite transponder. A. Early bird B. Score C. Moon D. Sputnik
Last Answer : C. Moon
Description : Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP
Last Answer : C. Downlink
Description : In satellite communications, what means of attitude control is using the angular momentum of the spinning body to provide the roll and yaw stabilization? A. Spin stabilization B. Radial stabilization C. Three-axis stabilization D. Station keeping
Last Answer : A. Spin stabilization
Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)
Last Answer : D. Data terminal equipment (DTE)
Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB
Last Answer : A. 198 dB
Description : One of the first satellite system catering personal based communications services scheduled for operation. A. Iridium system B. Plutonium system C. Indium system D. Gallium system
Last Answer : A. Iridium system
Description : ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of ... A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation
Last Answer : A. pulse duration modulation
Description : The use of telecommunication for automatic indicating or recording measurement at the distance from the measuring instrument. A. Monitoring B. Tracking C. Telemetry D. Telecommand
Last Answer : C. Telemetry
Description : Which does not use vertical polarization antenna? A. AM Broadcasting B. FM Broadcasting C. Mobile Communications D. Satellite Communications
Last Answer : B. FM Broadcasting
Description : Which of the following is the most common application of satellite? A. Surveillance B. Military application C. Communications D. Newscasting
Last Answer : C. Communications
Description : The main function of a communications satellite is a/ an A. repeater B. reflector C. beacon D. observation platform
Last Answer : A. repeater
Description : The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz
Last Answer : B. 14/11 GHz
Description : How does spatial isolation technique in satellite communications avoid interference? A. Use of different polarity antennas B. Use of different types of antennas C. Employment of highly directional spot-beam antennas D. Use of low gain antennas
Last Answer : C. Employment of highly directional spot-beam antennas
Description : What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P
Last Answer : A. Ku
Description : Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C
Last Answer : D. Both B and C
Description : ECE Board Exam March 1996 Communications code is ____________. A. eight bits per character B. agreed upon in advance between sender and receiver C. the same in all modern computers D. either seven or eight bits per character
Last Answer : B. agreed upon in advance between sender and receiver
Description : The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications ... to digital communications channel D. interface digital terminal equipment to digital communications channel
Last Answer : B. interface digital terminal equipment to analog communications channel
Description : The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. A. Tracking B. space command C. Telecommand D. Trunking
Description : The selection of the code 7600 on a transponder indicates: a. Loss of communications b. Distress c. Urgency d. Hijacking
Last Answer : a. Loss of communications
Description : Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA
Last Answer : C. Modulator
Description : How many transponder channels are realized in the commercial C-band without frequency re-use? A. 24 B. 12 C. 36 D. 48
Last Answer : B. 12
Description : What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps
Last Answer : B. 72 Mbps
Description : Combination of modulator, channel and detector. A. Transceiver B. Discrete channel C. T/R channel D. Transponder
Last Answer : B. Discrete channel
Description : ECE Board Exam March 1996 The point on the satellite orbit, closest to the earth is A. prograde B. perigee C. zenith D. apogee
Last Answer : B. perigee
Description : Electronic equipment used to measure standing wave ration. A. Reflectometer B. Wavemeter C. Altimeter D. Multimeter
Last Answer : A. Reflectometer
Description : The executive branch of government in charge of policy making in the telecommunications. A. National telecommunications commission B. Telecommunications control bureau C. Department of transportation and communications D. Bureau of telecommunications
Last Answer : C. Department of transportation and communications
Description : In telecommunications when we call data communications it means the transmission of________. A. Voice and video B. Voice C. Video D. Computer data
Last Answer : D. Computer data
Description : When troubleshooting electronic equipment, the FIRST step to be taken before testing the circuit voltage is to _________. A. set the meter to the lowest range B. check the voltage supply from the power source C. remove the suspected component D. check the current flow through the circuit
Last Answer : Answer: B
Description : ECE Board Exam March 1996 LORAN is a navigation system used primarily for A. approach control B. obtaining fixes over large distances C. blind landing D. automatic collision warning
Last Answer : B. obtaining fixes over large distances
Description : ECE Board Exam March 1996 LORAN is a navigational system used primarily for _____________. A. blind landing B. obtaining your fixes location over large distances C. automatic collision warning D. approach control
Last Answer : B. obtaining your fixes location over large distances
Description : Is a non-coherent light source foe optical communications system. a. ILD b. LED c. APD d. PIN Diode
Last Answer : b. LED
Description : An automated ship-to-shore distress alerting system using satellites and advanced terrestrial communications systems. A. GPS B. Iridium system C. INMARSAT D. GMDSS
Last Answer : D. GMDSS
Description : What term is used to describe a spread spectrum communications system in which a very fast binary bit stream is used to shift the phase of an RF carrier? A. Frequency hopping B. Direct sequence C. Binary phase-shift keying D. Phase compandored spread spectrum
Last Answer : B. Direct sequence