What is the difference between a Clevis pin and a Cotter pin?

What is the difference between a Clevis pin and a Cotter pin?
by

1 Answer

Answer :

Clevis Cotter Pin
by

Related questions

What is a router?

Description : What is a router?

Last Answer : a router works pretty simple, network signal comes in, and distributes it over the network, the router itself maintains that network if you want to, because a router can be used as a DHCP server, what ... just helps connect a lot more machines to a network i hope that's a bit clearer than wiki

How has the joystick impacted society?

Description : How has the joystick impacted society?

Last Answer : It has affected MY hardware quite significantly ;)

what is the definition of a dicom compliant server?

Description : what is the definition of a dicom compliant server?

Last Answer : answer:http://www.cmt-med.com/site/English/dicom/main.asp www.google.com ..try it, you’ll like it

What are the covers you put over extension cords so people don't trip on them?

Description : What are the covers you put over extension cords so people don't trip on them?

Last Answer : cable runners

How to hang my hammock without trees?

Description : How to hang my hammock without trees?

Last Answer : I’m sure a post set in concrete would be fine. Have you asked your neighbor about using his shed?

What Are The Two Major Differences Between Intr And Other Interrupts ( Hardware)?

Description : What Are The Two Major Differences Between Intr And Other Interrupts ( Hardware)?

Last Answer : Answer :The two major differences between INTR and the other hardware interrupts are as follows:All the hardware interrupts are vectored interrupts but the INTR interrupt is not so. An INTR interrupt will ... saved but in the case of other hardware interrupts the locations is saved in the stack.

What Are Hardware Interrupts?

Description : What Are Hardware Interrupts?

Last Answer : Answer :TRAP, RST7.5, RST6.5, RST5.5, INTR.

Fun Things you Can Do with Old Computer Hardware

Description : Fun Things you Can Do with Old Computer Hardware

Last Answer : Computers can get outdated in a matter of years or even just a few months. If you are the type of person who has that upgrade itch inside you, then you probably have a lot of old computer ... Feel free to experiment around by using your creativity. Feel free to suggest other stuff you can do too.

In a faceplate-type motor starter, the starting arm is held in the 'OFF' position by a/an _____________. A. cotter pin B. magnet C. electrical circuit D. strong spring

Description : In a faceplate-type motor starter, the starting arm is held in the 'OFF' position by a/an _____________. A. cotter pin B. magnet C. electrical circuit D. strong spring

Last Answer : Answer: D

The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

What was the two purpose of providing clearance in cotter joint?

Description : What was the two purpose of providing clearance in cotter joint?

Last Answer : Feel Free to Answer

A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Last Answer : A. Co-axial

Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Last Answer : A. True

Cotter joint is a permanent fastening. a) true b) false

Description : Cotter joint is a permanent fastening. a) true b) false

Last Answer : b) false

The taper on cotter and slot is fomed on both the location is agreed or not.. a) agree b) disagree

Description : The taper on cotter and slot is fomed on both the location is agreed or not.. a) agree b) disagree

Last Answer : b) disagree

Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above

Description : Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above

Last Answer : c) Axial tensile or compressive

Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Cotter joints is used for transforming rotating torque. A. True B. False

Description : Cotter joints is used for transforming rotating torque. A. True B. False

Last Answer : B. False

Cotter joint is connected to parallel roads . A. True B. False

Description : Cotter joint is connected to parallel roads . A. True B. False

Last Answer : B. False

Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Last Answer : C. Axial tensile or compressive load

Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Last Answer : A. Co - axial

Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Last Answer : b) False

The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Cotter joints is used for transforming rotating torque. A. True B. False

Description : Cotter joints is used for transforming rotating torque. A. True B. False

Last Answer : B. False

Cotter joint is connected to parallel roads . A. True B. False

Description : Cotter joint is connected to parallel roads . A. True B. False

Last Answer : B. False

In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Taper on Cotter is varies from A. 1 in 15 to 1 in 12 B. 1 in 20 to 1 in 15 C. 1 in 25 to 1 in 20 D. 1 in 48 to 1 in 24

Description : Taper on Cotter is varies from A. 1 in 15 to 1 in 12 B. 1 in 20 to 1 in 15 C. 1 in 25 to 1 in 20 D. 1 in 48 to 1 in 24

Last Answer : D. 1 in 48 to 1 in 24

The draw of cotter should not be more than the........ A. 3 mm B. 4 mm C. 5 mm D. 6 mm

Description : The draw of cotter should not be more than the........ A. 3 mm B. 4 mm C. 5 mm D. 6 mm

Last Answer : A. 3 mm

Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Last Answer : C. Axial tensile or compressive load

Taper is made cotter and slot on both the side. A. Yes B. No

Description : Taper is made cotter and slot on both the side. A. Yes B. No

Last Answer : B. No

Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Last Answer : A. Co - axial

Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False

Description : Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False

Last Answer : a) True

The principle of wedge action is used in cotter joint. a) True b) False

Description : The principle of wedge action is used in cotter joint. a) True b) False

Last Answer : a) True

Cotter joint is used when the members are subjected to which type of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the mentioned

Description : Cotter joint is used when the members are subjected to which type of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the mentioned

Last Answer : c) Axial tensile or compressive