Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False

Can the cotter joint be used to connect slide spindle and fork of valve mechanism?

a) True

b) False
by

1 Answer

Answer :

a) True
by

Related questions

Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Last Answer : b) False

Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Last Answer : A. True

Cotter joint is a permanent fastening. a) true b) false

Description : Cotter joint is a permanent fastening. a) true b) false

Last Answer : b) false

Cotter joint is connected to parallel roads . A. True B. False

Description : Cotter joint is connected to parallel roads . A. True B. False

Last Answer : B. False

Cotter joint is connected to parallel roads . A. True B. False

Description : Cotter joint is connected to parallel roads . A. True B. False

Last Answer : B. False

The principle of wedge action is used in cotter joint. a) True b) False

Description : The principle of wedge action is used in cotter joint. a) True b) False

Last Answer : a) True

A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Last Answer : A. Co-axial

A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Description : A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Last Answer : a) Yes

Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above

Description : Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above

Last Answer : c) Axial tensile or compressive

Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

Cotter joint is used when the members are subjected to which type of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the mentioned

Description : Cotter joint is used when the members are subjected to which type of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the mentioned

Last Answer : c) Axial tensile or compressive

Cotter joints is used for transforming rotating torque. A. True B. False

Description : Cotter joints is used for transforming rotating torque. A. True B. False

Last Answer : B. False

Cotter joints is used for transforming rotating torque. A. True B. False

Description : Cotter joints is used for transforming rotating torque. A. True B. False

Last Answer : B. False

The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False

Description : The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False

Last Answer : A. True

Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Description : Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Last Answer : A. True

Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above

Description : Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above

Last Answer : D. All of the above

Which of the following are important parts of knuckle joint? a) Eye b) Pin c) Fork d) Each of the mentioned

Description : Which of the following are important parts of knuckle joint? a) Eye b) Pin c) Fork d) Each of the mentioned

Last Answer : d) Each of the mentioned

Which of the following is used to control the speed variations of the engine caused by the fluctuations of the engine turning moment? 1. D-slide valve 2. Governor 3. Flywheel 4. Meyer’s expansion valve

Description : Which of the following is used to control the speed variations of the engine caused by the fluctuations of the engine turning moment? 1. D-slide valve 2. Governor 3. Flywheel 4. Meyer’s expansion valve

Last Answer : 3. Flywheel

The taper on cotter and slot is fomed on both the location is agreed or not.. a) agree b) disagree

Description : The taper on cotter and slot is fomed on both the location is agreed or not.. a) agree b) disagree

Last Answer : b) disagree

Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Last Answer : C. Axial tensile or compressive load

Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Last Answer : A. Co - axial

Taper on Cotter is varies from A. 1 in 15 to 1 in 12 B. 1 in 20 to 1 in 15 C. 1 in 25 to 1 in 20 D. 1 in 48 to 1 in 24

Description : Taper on Cotter is varies from A. 1 in 15 to 1 in 12 B. 1 in 20 to 1 in 15 C. 1 in 25 to 1 in 20 D. 1 in 48 to 1 in 24

Last Answer : D. 1 in 48 to 1 in 24

The draw of cotter should not be more than the........ A. 3 mm B. 4 mm C. 5 mm D. 6 mm

Description : The draw of cotter should not be more than the........ A. 3 mm B. 4 mm C. 5 mm D. 6 mm

Last Answer : A. 3 mm

Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Last Answer : C. Axial tensile or compressive load

Taper is made cotter and slot on both the side. A. Yes B. No

Description : Taper is made cotter and slot on both the side. A. Yes B. No

Last Answer : B. No

Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined

Last Answer : A. Co - axial

The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False

Description : The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False

Last Answer : A. True

The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Description : The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Last Answer : b) False

A knuckle joint is also called socket pin joint. a) True b) False

Description : A knuckle joint is also called socket pin joint. a) True b) False

Last Answer : b) False

A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False

Description : A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False

Last Answer : a) True

A but joint can be defined as a joint between two components lying approximately in a different plane. a) True b) False

Description : A but joint can be defined as a joint between two components lying approximately in a different plane. a) True b) False

Last Answer : b) False

The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple plane. C. Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Description : The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple ... Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Last Answer : A. Two roads whose Axes are coincide or intersecting and lies in single plane.

Knuckle Joint can’t be used to connect two intersecting rods. a) Yes b) No, it can’t be used c) It can be used with some modificatios d) It is expensive and hence isn’t used

Description : Knuckle Joint can’t be used to connect two intersecting rods. a) Yes b) No, it can’t be used c) It can be used with some modificatios d) It is expensive and hence isn’t used

Last Answer : b) No, it can’t be used

Oldham coupling i used to connect two shafts having intersecting axes. a) True b) False

Description : Oldham coupling i used to connect two shafts having intersecting axes. a) True b) False

Last Answer : b) False

Oldham coupling i used to connect two shafts having intersecting axes. a) True b) False

Description : Oldham coupling i used to connect two shafts having intersecting axes. a) True b) False

Last Answer : b) False

______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed

Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed

Last Answer : a) Spindle

______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed

Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed

Last Answer : a) Spindle

The type of key used when the gear is required to slide on the shaft is (A) Sunk key (B) Feather key (C) Woodruff key (D) Kennedy key

Description : The type of key used when the gear is required to slide on the shaft is (A) Sunk key (B) Feather key (C) Woodruff key (D) Kennedy key

Last Answer : (B) Feather key

What was the two purpose of providing clearance in cotter joint?

Description : What was the two purpose of providing clearance in cotter joint?

Last Answer : Feel Free to Answer

True or false? Inventors developed a fork that measures how fast you eat your food . -General Knowledge

Description : True or false? Inventors developed a fork that measures how fast you eat your food . -General Knowledge

Last Answer : My mother has been telling me to EAT SLOWER, JUSTIN! for approximately 23 years now, and it seems that she can finally give it a rest: HAPIfork, the brainchild of French inventor Jacques Lepine, is ... smart fork (yes, a smart fork), designed to keep track of how fast you're eating