The following is the correct order of energy conversion in thermal power plants a. Chemical energy – Mechanical energy – Electrical energy b. Mechanical energy – Chemical energy – Electrical energy c. Wind energy – Mechanical energy – Electrical energy d. Heat energy – Electrical energy – Mechanical energy.

The following is the correct order of energy conversion in thermal power plants
a. Chemical energy – Mechanical energy – Electrical energy
b. Mechanical energy – Chemical energy – Electrical energy
c. Wind energy – Mechanical energy – Electrical energy
d. Heat energy – Electrical energy – Mechanical energy.
by

1 Answer

Answer :

a. Chemical energy – Mechanical energy – Electrical energy
by

Related questions

A boiler is a device used to create steam by applying __________to water a) Light energy b) heat energy c) Wind energy d) mechanical energy

Description : A boiler is a device used to create steam by applying __________to water a) Light energy b) heat energy c) Wind energy d) mechanical energy

Last Answer : b) heat energy

Boiler efficiency is a measure of how effectively _______ energy in fuel is converted into heat energy in steam going to the turbines A Chemical energy B Heat energy C Thermal energy D All of the above

Description : Boiler efficiency is a measure of how effectively _______ energy in fuel is converted into heat energy in steam going to the turbines A Chemical energy B Heat energy C Thermal energy D All of the above

Last Answer : A Chemical energy

What kind of energy output is obtained from a ‘Steam Power Plant’? a. Heat energy b. Sound energy c. Electricity d. Thermal energy

Description : What kind of energy output is obtained from a ‘Steam Power Plant’? a. Heat energy b. Sound energy c. Electricity d. Thermal energy

Last Answer : c. Electricity

The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Description : The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Last Answer : A]Increase thermal efficiency of boiler

Thermal of well-maintained boiler will be of the order ______ a. 30% b. 55% c. 90% d. 45%

Description : Thermal of well-maintained boiler will be of the order ______ a. 30% b. 55% c. 90% d. 45%

Last Answer : c. 90%

A steam engine converts the heat energy of steam into _____. (1) Electrical energy (2) Chemical energy (3) Mechanical energy (4) Thermal energy

Description : A steam engine converts the heat energy of steam into _____. (1) Electrical energy (2) Chemical energy (3) Mechanical energy (4) Thermal energy

Last Answer : (3) Mechanical energy Explanation: Steam engine, machine for converting heat energy into mechanical energy using steam as a medium, or working fluid.

The efficiency of the plant _____ with the mechanical draught a) Increases b) Decreases c) Remain constant d) None of the above

Description : The efficiency of the plant _____ with the mechanical draught a) Increases b) Decreases c) Remain constant d) None of the above

Last Answer : a) Increases

The draught may be produced by a_________ a) Chimney b) Mechanical fan c) Steam jet d) All of the above

Description : The draught may be produced by a_________ a) Chimney b) Mechanical fan c) Steam jet d) All of the above

Last Answer : d) All of the above

What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity

Description : What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity

Last Answer : • Density

A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None

Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None

Last Answer : • Boiler

A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None

Description : A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None

Last Answer : a. Boiler, generate

A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. A Steam B Boiler C Hydrogen D None

Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. A Steam B Boiler C Hydrogen D None

Last Answer : B Boiler

A boiler or steam generator is a device used to create steam by applying heat energy to _____. • Water • Petrol • Oil • All of the above

Description : A boiler or steam generator is a device used to create steam by applying heat energy to _____. • Water • Petrol • Oil • All of the above

Last Answer : • Water

What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Description : What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Last Answer : c. Formation of bubbles

Combustion of which fuels from following is source of heat for boiler 1. Wood 2. Coal 3. Oil 4. All of above

Description : Combustion of which fuels from following is source of heat for boiler 1. Wood 2. Coal 3. Oil 4. All of above

Last Answer : 4. All of above

Adiabatic process is (A) Essentially an isentropic process is___________ (B) Non-heat transfer process (C) Reversible process (D) Constant temperature process

Description : Adiabatic process is (A) Essentially an isentropic process is___________ (B) Non-heat transfer process (C) Reversible process (D) Constant temperature process

Last Answer : (B) Non-heat transfer process

The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases

Description : The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases

Last Answer : (B) Decreases

……… is excellent carrier of heat a) Water b) steam c) solid d) None of above

Description : ……… is excellent carrier of heat a) Water b) steam c) solid d) None of above

Last Answer : b) steam

The product of efficiency & heat transferred to the working fluid is? a. Net temperature change b. Net work done c. Net enthalpy change d. None of the mentioned

Description : The product of efficiency & heat transferred to the working fluid is? a. Net temperature change b. Net work done c. Net enthalpy change d. None of the mentioned

Last Answer : b. Net work done

Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above

Description : Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above

Last Answer : • All of the above

The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Description : The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Last Answer : • Steam

A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Description : A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Last Answer : c. Combustion, transfers

The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Description : The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Last Answer : a. Steam

A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Description : A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Last Answer : c. Steam boiler

What is the main component in a boiler a) steam b) heat c) pressure condenser d) combination

Description : What is the main component in a boiler a) steam b) heat c) pressure condenser d) combination

Last Answer : a) steam

The heat in the boiler is used for making ______ a) steam b) condensing process c) ice d) none of these

Description : The heat in the boiler is used for making ______ a) steam b) condensing process c) ice d) none of these

Last Answer : a) steam

For caring the heat efficiently the steam must be__________ a) dry b) wet c) saturated d) none of above

Description : For caring the heat efficiently the steam must be__________ a) dry b) wet c) saturated d) none of above

Last Answer : c) saturated

_________is the most widely used media in distribution of heat over distance in industries a) Steam b) light c) Springs c) water

Description : _________is the most widely used media in distribution of heat over distance in industries a) Steam b) light c) Springs c) water

Last Answer : a) Steam

Green coal, in order to be burnt, must be (A) Heated sufficiently (B) Burnt in excess air (C) Heated to its ignition point (D) Burnt as powder

Description : Green coal, in order to be burnt, must be (A) Heated sufficiently (B) Burnt in excess air (C) Heated to its ignition point (D) Burnt as powder

Last Answer : (C) Heated to its ignition point

The diameter of fine tubes in Cochran boiler is of order of _______ a. 2cm b. 6cm c. 8cm d. 15cm

Description : The diameter of fine tubes in Cochran boiler is of order of _______ a. 2cm b. 6cm c. 8cm d. 15cm

Last Answer : b. 6cm

Combustion is the ideal air/fuel ratio where a. the mixing proportion is correct, b. the fuel is completely burned c. the oxygen is entirely consumed d. All of the above

Description : Combustion is the ideal air/fuel ratio where a. the mixing proportion is correct, b. the fuel is completely burned c. the oxygen is entirely consumed d. All of the above

Last Answer : d. All of the above

If steam is pressurized _____ • It occupies more space • It occupies less space • Both are correct • None of the above

Description : If steam is pressurized _____ • It occupies more space • It occupies less space • Both are correct • None of the above

Last Answer : • It occupies less space

Boiler works from application of which type of energies 1. Fuel combustion 2. Electricity 3. Nuclear energy 4. All of above

Description : Boiler works from application of which type of energies 1. Fuel combustion 2. Electricity 3. Nuclear energy 4. All of above

Last Answer : 4. All of above

Find the wrong statement. • Boiler is used to produce electricity in the energy business. • Boiler is used to produce steam for generating electricity. • Boiler can pressurize the water and can also evaporate it. All are wrong.

Description : Find the wrong statement. • Boiler is used to produce electricity in the energy business. • Boiler is used to produce steam for generating electricity. • Boiler can pressurize the water and can also evaporate it. All are wrong.

Last Answer : • Boiler can pressurize the water and can also evaporate it.

Direct relation between…….. &………of saturated steam, the amount of energy input to process easy to control. a) volume, pressure b) volume, temperature c) temperature, pressure d) None of above

Description : Direct relation between…….. &………of saturated steam, the amount of energy input to process easy to control. a) volume, pressure b) volume, temperature c) temperature, pressure d) None of above

Last Answer : c) temperature, pressure

Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%

Description : Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%

Last Answer : b.35% - 40%

Why single boiler unit per turbine is equipped commonly? • For better turbine control • To reduce the cost • For overcoming losses of power • To improve the efficiency

Description : Why single boiler unit per turbine is equipped commonly? • For better turbine control • To reduce the cost • For overcoming losses of power • To improve the efficiency

Last Answer : • For better turbine control

The _______ system includes anywhere that the steam condenses to form liquid water. a. Loop b. Power c. Liquid d. Condensate

Description : The _______ system includes anywhere that the steam condenses to form liquid water. a. Loop b. Power c. Liquid d. Condensate

Last Answer : d. Condensate

Steam produced in a boiler can be used for a variety of purposes including space heating, drying and _________________ a. Sterilization b. Humidification c. Power generation d. All of above

Description : Steam produced in a boiler can be used for a variety of purposes including space heating, drying and _________________ a. Sterilization b. Humidification c. Power generation d. All of above

Last Answer : d. All of above

____________is used to release condensate in pipe work a) steam trap b) valves c) power generators d) none of above

Description : ____________is used to release condensate in pipe work a) steam trap b) valves c) power generators d) none of above

Last Answer : b) valves

According to the second law of thermodynamics, energy tends to become more and more unavailable for conversion from: w) thermal to kinetic energy x) kinetic to thermal energy y) thermal to mechanical energy z) mechanical to thermal energy

Description : According to the second law of thermodynamics, energy tends to become more and more unavailable for conversion from: w) thermal to kinetic energy x) kinetic to thermal energy y) thermal to mechanical energy z) mechanical to thermal energy

Last Answer : ANSWER: Y -- THERMAL TO MECHANICAL ENERGY

Identify the correct sequence of energy sources in order of their share in the power sector in India: (A) Thermal > nuclear > hydro > wind (B) Thermal > hydro > nuclear > wind (C) Hydro > nuclear > thermal > wind (D) Nuclear > hydro > wind > thermal

Description : Identify the correct sequence of energy sources in order of their share in the power sector in India: (A) Thermal > nuclear > hydro > wind (B) Thermal > hydro > nuclear > wind (C) Hydro > nuclear > thermal > wind (D) Nuclear > hydro > wind > thermal

Last Answer : (B) Thermal > hydro > nuclear > wind

Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : (2) Mechanical energy into electrical energy Explanation: A dynamo is a device for converting mechanical energy into electrical energy, esp. one that produces direct current. A dynamo is an ... were based, including the electric motor, the alternating-current alternator, and the rotary converter.

Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : (2) Mechanical energy into electrical energy Explanation: A dynamo is a device for converting mechanical energy into electrical energy, esp. one that produces direct current. A dynamo is an ... were based, including the electric motor, the alternating-current alternator, and the rotary converter.

A photoelectric cell converts – (1) Mechanical energy to electric energy (2) Heat energy to mechanical energy (3) Light energy to chemical energy (4) Light energy to electrical energy

Description : A photoelectric cell converts – (1) Mechanical energy to electric energy (2) Heat energy to mechanical energy (3) Light energy to chemical energy (4) Light energy to electrical energy

Last Answer : (4) Light energy to electrical energy Explanation: Photoelectric cell or photocell, device whose electrical characteristics (e.g., current, voltage, or resistance) vary when light is incident ... The most common type consists of two electrodes separated by a light-sensitive semiconductor material.

A photo-electric cell converts (1) mechanical energy to electric energy (2) heat energy to mechanical energy (3) light energy to chemical energy (4) light energy to electrical energy

Description : A photo-electric cell converts (1) mechanical energy to electric energy (2) heat energy to mechanical energy (3) light energy to chemical energy (4) light energy to electrical energy

Last Answer : light energy to electrical energy

Dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : Mechanical energy into electrical energy

Which of the following energy sources does NOT originally come from the Sun? w) wind x) Ocean thermal energy conversion y) geothermal z) hydroelectric

Description : Which of the following energy sources does NOT originally come from the Sun? w) wind x) Ocean thermal energy conversion y) geothermal z) hydroelectric

Last Answer : ANSWER: Y -- GEOTHERMAL

Which one of the following non-conventional energy sources can be exploited most economically? (A) Solar (B) Wind (C) Geo-thermal (D) Ocean Thermal Energy Conversion (OTEC)

Description : Which one of the following non-conventional energy sources can be exploited most economically? (A) Solar (B) Wind (C) Geo-thermal (D) Ocean Thermal Energy Conversion (OTEC)

Last Answer : Answer: A

Gliders depend on the following energy for their flight: (1) wind energy (2) electrical energy (3) heat energy (4) chemical energy

Description : Gliders depend on the following energy for their flight: (1) wind energy (2) electrical energy (3) heat energy (4) chemical energy

Last Answer : wind energy