Echo suppressor is detrimental to full duplex operation because (A) It disables one of the two pairs in a four-wire trunk line when a signal is detected on the other pair. (B) It enables one of the two pairs in a four-wire trunk line when a signal is detected on the other pair. (C) It activates both the pairs of a four-wire trunk line. (D) It is independent of line conditions.

Echo suppressor is detrimental to full duplex operation because
(A) It disables one of the two pairs in a four-wire trunk line when a signal is
detected on the other pair.
(B) It enables one of the two pairs in a four-wire trunk line when a signal is
detected on the other pair.
(C) It activates both the pairs of a four-wire trunk line.
(D) It is independent of line conditions.
by

1 Answer

Answer :

(A) It disables one of the two pairs in a four-wire trunk line when a signal is detected on the other pair.
by

Related questions

Computer to computer communication is: (A) Simplex (B) Duplex (C) Half Duplex (D) Both Duplex and Half Duplex

Description : Computer to computer communication is: (A) Simplex (B) Duplex (C) Half Duplex (D) Both Duplex and Half Duplex

Last Answer : (B) Duplex

Network with point-to-point link is known as (A) Fully Connected Network (B) Half Connected Network (C) Duplex Connected Network (D) None of these

Description : Network with point-to-point link is known as (A) Fully Connected Network (B) Half Connected Network (C) Duplex Connected Network (D) None of these

Last Answer : (A) Fully Connected Network

Call request signal is: (A) Seize signal (B) Idle state signal (C) Line identification signal (D) Called subscriber alert signal

Description : Call request signal is: (A) Seize signal (B) Idle state signal (C) Line identification signal (D) Called subscriber alert signal

Last Answer : (A) Seize signal

A large numbers of computers in a wide geographical area can be efficiently connected using (A) twisted pair lines (B) coaxial cables (C) Communication satellites (D) all of the above

Description : A large numbers of computers in a wide geographical area can be efficiently connected using (A) twisted pair lines (B) coaxial cables (C) Communication satellites (D) all of the above

Last Answer : (D) all of the above

The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Description : The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Last Answer : (D) Network service part (NSP)

ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Description : ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Last Answer : (B) Error in received data

The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Description : The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Last Answer : (A) 2fs

Companding helps in reducing __________ with respect to signal: (A) Interference (B) Signal overloading (C) Non linearity (D) Quantization noise

Description : Companding helps in reducing __________ with respect to signal: (A) Interference (B) Signal overloading (C) Non linearity (D) Quantization noise

Last Answer : (D) Quantization noise

Example of circuit switching and S&F (Stored and Forward) switching is (A) Telephone and Post of Telegraph (B) Video Signal Post or Telegraph (C) Digital Signal Post or Telegraph (D) None of above

Description : Example of circuit switching and S&F (Stored and Forward) switching is (A) Telephone and Post of Telegraph (B) Video Signal Post or Telegraph (C) Digital Signal Post or Telegraph (D) None of above

Last Answer : (A) Telephone and Post of Telegraph

As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Description : As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Last Answer : (A) 2fs

An off-hook signal will repeat for a/an ________duration. (A) finite (B) infinite (C) duration of 40 seconds (D) duration of 80 seconds

Description : An off-hook signal will repeat for a/an ________duration. (A) finite (B) infinite (C) duration of 40 seconds (D) duration of 80 seconds

Last Answer : (A) finite

Draw a centralized SPC organization and explain how it works under load sharing operation.

Description : Draw a centralized SPC organization and explain how it works under load sharing operation.

Last Answer : In centralized control, all the control equipment is replaced by a single processor which must be quite powerful. It must be capable of processing 10 to 100 calls per second, depending on the ... both the processors are active simultaneously and share the load and the resources dynamically.  

What is centralized SPC, what are its modes of operation; explain the working of any one of these?

Description : What is centralized SPC, what are its modes of operation; explain the working of any one of these?

Last Answer : In centralized control, all the control equipment is replaced by a single processor which must be quite powerful. It must be capable of processing 10 to 100 calls per second, depending on ... The shared secondary storage need not be duplicated and simple unit level redundancy would suffice.  

What is time multiplexed space switching? With a neat diagram explain its operation.

Description : What is time multiplexed space switching? With a neat diagram explain its operation.

Last Answer : Time division switches where an inlet or an outlet corresponded to a single subscriber line with one speech sample appearing every 125 µs on the line. Such switches are used in local exchanges. We now ... / Mt , Where t is the switching time including memory access time per inlet-outlet pair.  

What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Description : What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Last Answer : Here three different designing methods for 100 line exchange are discussed: Design 1: Here, Strowger switching system is designed using one two-motion selector for each subscriber. A ... only under certain specific traffic conditions and generally lead to higher blocking probabilities.  

In a hundred-line exchange 24 two-motion selectors are used. Draw the schematic you suggest for this exchange and explain its working. How many simultaneous calls can be made during peak hour in this exchange?

Description : In a hundred-line exchange 24 two-motion selectors are used. Draw the schematic you suggest for this exchange and explain its working. How many simultaneous calls can be made during peak hour in this exchange?

Last Answer : The desired schematic for 100 lines exchange with 24 two motion selectors is shown in Fig.   In the case, 24 simultaneous calls can be put through the switch . Typically, a 24- ... selector. At the next step, the two-motion selector responds to the dial pulses for appropriate connection.

Using a combination of uniselectors and two motion selectors, draw a schematic of thousand line exchange and explain its working.

Description : Using a combination of uniselectors and two motion selectors, draw a schematic of thousand line exchange and explain its working.

Last Answer : The schematic diagram for such an exchange is given in Fig. Each subscriber is connected to a single rotary pre-selector switch at the exchange, the outputs from  this switch being ... further digits, connection is established, providing the called subscriber's to answer his telephone.  

In step by step switching line finders are connected to the (A) Calling subscriber. (B) Switching network. (C) Called subscriber. (D) Between exchanges.

Description : In step by step switching line finders are connected to the (A) Calling subscriber. (B) Switching network. (C) Called subscriber. (D) Between exchanges.

Last Answer : (A) Calling subscriber.

Distortion caused on telephone line by an adjacent one is called (A) Cross Fire (B) Inductive Disturbance (C) Cross Talk (D) None of these

Description : Distortion caused on telephone line by an adjacent one is called (A) Cross Fire (B) Inductive Disturbance (C) Cross Talk (D) None of these

Last Answer : (C) Cross Talk

The final selector is connected to the (A) calling subscriber. (B) switching network. (C) called subscriber. (D) line finder.

Description : The final selector is connected to the (A) calling subscriber. (B) switching network. (C) called subscriber. (D) line finder.

Last Answer : (C) called subscriber

When a switch capacity is full, calls coming into that switch are said to be____. (A) open (B) shorted (C) blocked (D) shunted

Description : When a switch capacity is full, calls coming into that switch are said to be____. (A) open (B) shorted (C) blocked (D) shunted

Last Answer : (C) blocked

Side tone is the speech heard by (A) the receiving subscriber (B) both the receiving and calling subscriber (C) by on looker (D) by calling subscriber

Description : Side tone is the speech heard by (A) the receiving subscriber (B) both the receiving and calling subscriber (C) by on looker (D) by calling subscriber

Last Answer : (D) by calling subscriber

The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Description : The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Last Answer : (C) synchronous

The suppressor grid is added to a tetrode to reduce what undesirable characteristic of tetrode operation?

Description : The suppressor grid is added to a tetrode to reduce what undesirable characteristic of tetrode operation?

Last Answer : Secondary emission.

Through two block diagrams explain the difference between Space division and time division switching.

Description : Through two block diagrams explain the difference between Space division and time division switching.

Last Answer :  Space and Time Switching: Space Switches: Connections can be made between incoming and outgoing PCM highways by means of a cross point matrix of the form shown in Fig. However, different channels of ... of the speech store, whose contents are read out and sent over the outgoing highway.  

A two stage non-blocking network requires twice the number of switching elements as the single stage non-blocking network. (A) TRUE (B) FALSE

Description : A two stage non-blocking network requires twice the number of switching elements as the single stage non-blocking network. (A) TRUE (B) FALSE

Last Answer : Ans: (A)

For two stage network the switching elements for M inlets with r blocks and N outlets with s blocks is given by (A) Ms + Nr (B) Mr + Ns (C) (M + N) (r + s) (D) (M + N)rs

Description : For two stage network the switching elements for M inlets with r blocks and N outlets with s blocks is given by (A) Ms + Nr (B) Mr + Ns (C) (M + N) (r + s) (D) (M + N)rs

Last Answer : (A) Ms + Nr

What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Description : What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Last Answer :  Numbering and Addressing: In telephone and data networks, the end equipments are more often single units than multiple devices units like PABX or LAN. Historically, a telephone, a computer, or a ... as reference point may also be addressed by using direct inward dialing (DID) feature.  

Explain the process of inter-register signalling.

Description : Explain the process of inter-register signalling.

Last Answer : Registers are used in common control exchanges to store and analyze routing data. They are provided on a common basis is a single register provides routing data for a number of speech circuits. Once a call ... it is released and the originating register signals to the next register.

Explain FDM and show how CCITT standards help in building the base band?

Description : Explain FDM and show how CCITT standards help in building the base band?

Last Answer : Frequency Division Multiplexing: It is the process of combining several information channels by shifting their signals to different frequency groups within the spectrum so that they can be transmitted simultaneously ... of 24 channels were assembled together in one stage of modulation.     

What are transmission bridges? How do they help in satisfying the connectivity?

Description : What are transmission bridges? How do they help in satisfying the connectivity?

Last Answer : A typical transmission bridge is shown in Fig. The series capacitance and the shunt inductances of the two relays provide a high-pass filter to transmit the AC speech signals, while the relays respond independently to the DC loop/disconnect signals from the calling and called customer.  

How numbering plan is achieved in modern telephony? Give the structure with example.

Description : How numbering plan is achieved in modern telephony? Give the structure with example.

Last Answer :  The objective of numbering plan is to uniquely identify every subscriber connected to a telecommunication network. A numbering plan may be open, semiopen or closed. An open-numbering plan permits wide ... known as the subscriber number which is the number listed in the telephone directory.   

How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Description : How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Last Answer : Pulse dialing: 1. Generated through make and break contact. 2. DC Current pulse is generated. 3. Each number is separated by a short pause to prevent overlapping. 4. Codes ... dialing pulse is not misinterpreted as the phone being returned to its on-hook (idle) condition.   

Discuss different Routing plan adopted in a Telephone network.

Description : Discuss different Routing plan adopted in a Telephone network.

Last Answer : Hierarchical networks are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. Three methods are used for deciding on the route for a ... selection methods can be implemented. Computer based routing is a standard feature in data networks.  

Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Description : Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Last Answer : Subscriber Loop System: Every subscriber in a telephone network is connected generally to the nearest switching office by means of a dedicated pair of wires. Subscriber loop refers to this pair of wires. It is un ... 1. Diameter of wire 2. D.C. resistance per Km 3. Attenuation per Km 

What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Description : What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Last Answer : Traffic engineering provides the basis for analysis and design of telecommunication network to carry a given traffic at a particular loss probability. It provides a means to determine the quantum of common equipments ... A0  Where  A= offered traffic  A0 = carried traffic  A-A0= lost traffic    

Explain topology method used in LAN technology in detail.

Description : Explain topology method used in LAN technology in detail.

Last Answer : LAN Topologies: Network topology is a physical schematic which shows interconnection of the many users. There are four basic topologies as under: (i) Direct Connection or one to all topology ( ... temporarily, inserting the new node and then reestablishing the complete ring path.

List all seven layer of OSI model and describe function of application layer.

Description : List all seven layer of OSI model and describe function of application layer.

Last Answer : The layers of OSI model are as follows:  (1) The Physical Layer: This defines an interface in terms of the connections, voltage levels and data rate, in order for signals to ... with the applications programs needed. Examples include electronic mail, word processing, banking transactions, etc.  

Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Description : Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Last Answer : Folded network: When all the inlets/outlets are connected to the subscriber lines, the logical connection appears as shown in Fig. In this case, the output lines are folded back to the input ... non-folded network to be non-blocking, the network should support N simultaneous switching paths.  

Explain simple telephone communication system with circuit and equation of current flow in microphone?

Description : Explain simple telephone communication system with circuit and equation of current flow in microphone?

Last Answer : Simple Telephone Communication: In the simplest form of a telephone circuit, there is one way communication involving two entities, one receiving (listening) and the other transmitting (talking).   ... carrier wave in AM system. The quantity m is equivalent to the modulation index in AM. 

Explain crossbar exchange, with all call processing steps and diagrams

Description : Explain crossbar exchange, with all call processing steps and diagrams

Last Answer : The basic idea of crossbar switching is to provide a matrix of n x m sets of contacts with only n + m activators or less to select one of the n x m sets of contacts. This form of ... a contact is established at the cross point 6 such that the subscriber B is connected to the subscriber C. 

What are the advantages and disadvantages of packet switching over circuit switching?

Description : What are the advantages and disadvantages of packet switching over circuit switching?

Last Answer : The comparison of packet switching and circuit switching showing advantages and disadvantages of packet switching over circuit switching is given below:

What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Description : What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Last Answer : Modems are essentially used to interface digital circuits to transmit information on analogue channels like telephone systems. Modem (from modulator-demodulator) is a device that modulates an analogue carrier ... caused by the lines makes the detection even harder than amplitude modulation.   

What are the advantages of CCS over in-channel signalling?

Description : What are the advantages of CCS over in-channel signalling?

Last Answer : The advantages of CCS over in-channel signalling are listed below: a. Information can be exchange between the processors much more rapidly than when channel associated signaling is used. b ... for functions other than call processing, for example for maintenance or network management purposes. 

Explain the CCITT hierarchical structure of switching and routing using block schematic.

Description : Explain the CCITT hierarchical structure of switching and routing using block schematic.

Last Answer : Hierarchical network are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. A 5-level switching hierarchy is recommended by CCITT as ... A strictly hierarchical network suffers from serious drawback i.e. its poor fault tolerance future.

Show how finite state machine model helps in designing a switching system and give a typical example.

Description : Show how finite state machine model helps in designing a switching system and give a typical example.

Last Answer : Switching system basically belongs to the class of finite state machines (FSM) which are asynchronous in nature and follows a sequential logic for their operation. They can be modeled by ... circuits and memory elements. Clocked synchronous operation shown in Fig. overcome such problems.  

What are different control function categories, explain, how they help in signalling and control.

Description : What are different control function categories, explain, how they help in signalling and control.

Last Answer : In some switching systems, the control subsystem may be an integral part of the switching network itself. Such system is known as direct control switching systems. Those systems in which the control ... may be carried out at the level of the common control unit or the switching network.  

Explain the architecture of SS7 and compare with seven-layer OSI architecture.

Description : Explain the architecture of SS7 and compare with seven-layer OSI architecture.

Last Answer : A block schematic diagram of the CCITT no. 7 signaling system is shown in fig. Signal messages are passed from the central processor of the sending exchange to the CCS system. This consists of the microprocessor based ... part (TUE), the data user part(DUP) and the (ISDN) user part (ISDN-UP).  

Compare electromechanical switching system with electronic switching system.

Description : Compare electromechanical switching system with electronic switching system.

Last Answer : Ans:

Explain the terms. (i) Register marker. (ii) Conditional selection.

Description : Explain the terms. (i) Register marker. (ii) Conditional selection.

Last Answer : (i) Register marker: Strowger selectors perform counting and searching. However, the crossbar switch has no intelligence'. Something external to the switch must decide which magnets to operate. This is ... are found to be free does it operate the switches. This is called Conditional Selection.