Broad Band ISDN handles data rate of about (A) 64 kbps (B) 100 mbps (C) 5.4 mbps (D) 2.048 mbps

Broad Band ISDN handles data rate of about
 (A) 64 kbps (B) 100 mbps
 (C) 5.4 mbps (D) 2.048 mbps
by

1 Answer

Answer :

(A) 64 kbps
by

Related questions

How much packet data rate per user is supported by W-CDMA if the user is stationary? a) 2.048 Kbps b) 100 Mbps c) 2.048 Mbps d) 1 Gbps

Description : How much packet data rate per user is supported by W-CDMA if the user is stationary? a) 2.048 Kbps b) 100 Mbps c) 2.048 Mbps d) 1 Gbps

Last Answer : c) 2.048 Mbps

Explain the working of broad band ISDN.

Description : Explain the working of broad band ISDN.

Last Answer :  BISDN Configuration: Fig. shows how access to the BISDN network is accomplished. Each peripheral device is interfaced to the access node of a BISDN network through a broadband distant ... consequently, have higher transmission rates and offer more channel handling capacity than ISDN systems.  

ISDN handles data pertaining to (A) All digital services (B) Speech and Video (C) Computer data only (D) Speech only

Description : ISDN handles data pertaining to (A) All digital services (B) Speech and Video (C) Computer data only (D) Speech only

Last Answer : (A) All digital services

In ISDN, what is the basic access B channel data rate? A. 32 kbps B. 64 kbps C. 144 kbps D. 16 kbps

Description : In ISDN, what is the basic access B channel data rate? A. 32 kbps B. 64 kbps C. 144 kbps D. 16 kbps

Last Answer : B. 64 kbps

What is the data rate of the ISDN Basic access B channel? A. 192 kbps B. 32 kbps C. 64 kbps D. 144 kbps

Description : What is the data rate of the ISDN Basic access B channel? A. 192 kbps B. 32 kbps C. 64 kbps D. 144 kbps

Last Answer : C. 64 kbps

Basic speed rate of digital system. A. 144 kbps B. 1,544 kbps C. 64 kbps D. 2,048 kbps

Description : Basic speed rate of digital system. A. 144 kbps B. 1,544 kbps C. 64 kbps D. 2,048 kbps

Last Answer : C. 64 kbps

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ............... (A) 64 Kbps (B) 32 Mbps (C) 32 Kbps (D) 64 Mbps

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ............... (A) 64 Kbps (B) 32 Mbps (C) 32 Kbps (D) 64 Mbps

Last Answer : (C) 32 Kbps

What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Description : What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Last Answer :  Numbering and Addressing: In telephone and data networks, the end equipments are more often single units than multiple devices units like PABX or LAN. Historically, a telephone, a computer, or a ... as reference point may also be addressed by using direct inward dialing (DID) feature.  

What is the channel symbol rate in Bluetooth for each user? a) 270.833 Kbps b) 1 Gbps c) 100 Mbps d) 1 Mbps

Description : What is the channel symbol rate in Bluetooth for each user? a) 270.833 Kbps b) 1 Gbps c) 100 Mbps d) 1 Mbps

Last Answer : d) 1 Mbps

Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ................ (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Description : Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ... ...... (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Last Answer : Answer: Marks given to all

Maximum data transfer rate of the optical fiber is……….? a. 50 kbps b. 1000 kbps c. 1000 Mbps d. None of the these

Description : Maximum data transfer rate of the optical fiber is……….? a. 50 kbps b. 1000 kbps c. 1000 Mbps d. None of the these

Last Answer : c. 1000 Mbps

There are 10 users plugged into a hub running 10Mbps half-duplex.and a serverconnected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps

Description : There are 10 users plugged into a hub running 10Mbps half-duplex.and a server connected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps

Last Answer : d. 10 Mbps

Explain FDM and show how CCITT standards help in building the base band?

Description : Explain FDM and show how CCITT standards help in building the base band?

Last Answer : Frequency Division Multiplexing: It is the process of combining several information channels by shifting their signals to different frequency groups within the spectrum so that they can be transmitted simultaneously ... of 24 channels were assembled together in one stage of modulation.     

SS7 Protocol uses: (A) Out of band signalling. (B) Associated signalling. (C) Speech control signalling. (D) No signalling.

Description : SS7 Protocol uses: (A) Out of band signalling. (B) Associated signalling. (C) Speech control signalling. (D) No signalling.

Last Answer : (A) Out of band signalling.

Common channel signalling in SS7 is (A) out band control channel. (B) in band control channel. (C) speech control channel. (D) none of the above.

Description : Common channel signalling in SS7 is (A) out band control channel. (B) in band control channel. (C) speech control channel. (D) none of the above.

Last Answer : (B) in band control channel.

Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Description : Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Last Answer : Classifications of Data Network:  Data Networks are classified according to their geographical coverage: Wide area networks (WANs) Metropolitan area networks(MANs) Local area ...  V.53 Limits for the maintenance of telephone type circuits used for data transmission. 

What is the transmission rate of a GSM cellular systemA. 64 kbps B. 240 kbps C. 128 kbps D. 270 kbps

Description : What is the transmission rate of a GSM cellular system? A. 64 kbps B. 240 kbps C. 128 kbps D. 270 kbps

Last Answer : D. 270 kbps

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Description : What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Last Answer : Here three different designing methods for 100 line exchange are discussed: Design 1: Here, Strowger switching system is designed using one two-motion selector for each subscriber. A ... only under certain specific traffic conditions and generally lead to higher blocking probabilities.  

The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Description : The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Last Answer : (A) 2fs

Erlang is used to (A) Measure busy period (B) Give total busy period in minutes (C) Measure average call rate (D) Indicate total call period

Description : Erlang is used to (A) Measure busy period (B) Give total busy period in minutes (C) Measure average call rate (D) Indicate total call period

Last Answer : (A) Measure busy period

As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Description : As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Last Answer : (A) 2fs

A sample rate of ________is required for a good quality representation of telephone conversation. (A) 4500 times per second. (B) 700 integer sample points per minute. (C) 50 times per second per mile of distance travelled. (D) 8000 times per second.

Description : A sample rate of ________is required for a good quality representation of telephone conversation. (A) 4500 times per second. (B) 700 integer sample points per minute. (C) 50 times per second per mile of distance travelled. (D) 8000 times per second.

Last Answer : (C) 50 times per second per mile of distance travelled.

What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Description : What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Last Answer : Modems are essentially used to interface digital circuits to transmit information on analogue channels like telephone systems. Modem (from modulator-demodulator) is a device that modulates an analogue carrier ... caused by the lines makes the detection even harder than amplitude modulation.   

A distributed network configuration in which all data/information pass through a central computer is (A) Bus network (B) Star network (C) Ring network (D) Point to point network

Description : A distributed network configuration in which all data/information pass through a central computer is (A) Bus network (B) Star network (C) Ring network (D) Point to point network

Last Answer : (B) Star network

ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Description : ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Last Answer : (B) Error in received data

In a time division space switch the size of the control memory is N and its Width: (A)Log10M (B) LogeM (C) LogNM (D) Log2M Where N are the outlets and M the number of data samples

Description : In a time division space switch the size of the control memory is N and its Width: (A)Log10M (B) LogeM (C) LogNM (D) Log2M Where N are the outlets and M the number of data samples

Last Answer : Ans: (It should be 2 log2[N]

Network Layer is used for (A) Breaking up the data in frames for transmission (B) Deal with Error correction (C) Automatic Recovery of Procedure (D) Physical Architecture

Description : Network Layer is used for (A) Breaking up the data in frames for transmission (B) Deal with Error correction (C) Automatic Recovery of Procedure (D) Physical Architecture

Last Answer : (D) Physical Architecture

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

Common channel signalling______________ (A) Uses the speech or data path for signaling. (B) Does not use the speech or data path for signaling. (C) Needs no additional transmission facilities. (D) Finds it difficult to handle signaling during speech.

Description : Common channel signalling______________ (A) Uses the speech or data path for signaling. (B) Does not use the speech or data path for signaling. (C) Needs no additional transmission facilities. (D) Finds it difficult to handle signaling during speech.

Last Answer : (C) Needs no additional transmission facilities.

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Last Answer : (C) 1000 bps 

What carrier system multiplexes 96 voice band channels into a single 6.312 Mbps data signal? A. T1 carrier system B. T2 carrier system C. T1C carrier system D. T3 carrier system

Description : What carrier system multiplexes 96 voice band channels into a single 6.312 Mbps data signal? A. T1 carrier system B. T2 carrier system C. T1C carrier system D. T3 carrier system

Last Answer : B. T2 carrier system

Station A uses 32 byte packets to transmit messages to station B using sliding window protocol. The round trip delay between A and B is 40 milli seconds and the bottleneck bandwidth on the path between A and B is 64 kbps. The optimal window size of A is (1) 20 (2) 10 (3) 30 (4) 40

Description : Station A uses 32 byte packets to transmit messages to station B using sliding window protocol. The round trip delay between A and B is 40 milli seconds and the bottleneck bandwidth on the path between A and B is 64 kbps. The optimal window size of A is (1) 20 (2) 10 (3) 30 (4) 40

Last Answer : (2) 10

The bandwidth requirement of a telephone channel is (A) 3 KHz (B) 15 KHz (C) 5 KHz (D) 25 KHz

Description : The bandwidth requirement of a telephone channel is (A) 3 KHz (B) 15 KHz (C) 5 KHz (D) 25 KHz

Last Answer : (A) 3 KHz

Explain the process of inter-register signalling.

Description : Explain the process of inter-register signalling.

Last Answer : Registers are used in common control exchanges to store and analyze routing data. They are provided on a common basis is a single register provides routing data for a number of speech circuits. Once a call ... it is released and the originating register signals to the next register.

Draw a centralized SPC organization and explain how it works under load sharing operation.

Description : Draw a centralized SPC organization and explain how it works under load sharing operation.

Last Answer : In centralized control, all the control equipment is replaced by a single processor which must be quite powerful. It must be capable of processing 10 to 100 calls per second, depending on the ... both the processors are active simultaneously and share the load and the resources dynamically.  

What are transmission bridges? How do they help in satisfying the connectivity?

Description : What are transmission bridges? How do they help in satisfying the connectivity?

Last Answer : A typical transmission bridge is shown in Fig. The series capacitance and the shunt inductances of the two relays provide a high-pass filter to transmit the AC speech signals, while the relays respond independently to the DC loop/disconnect signals from the calling and called customer.  

How numbering plan is achieved in modern telephony? Give the structure with example.

Description : How numbering plan is achieved in modern telephony? Give the structure with example.

Last Answer :  The objective of numbering plan is to uniquely identify every subscriber connected to a telecommunication network. A numbering plan may be open, semiopen or closed. An open-numbering plan permits wide ... known as the subscriber number which is the number listed in the telephone directory.   

How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Description : How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Last Answer : Pulse dialing: 1. Generated through make and break contact. 2. DC Current pulse is generated. 3. Each number is separated by a short pause to prevent overlapping. 4. Codes ... dialing pulse is not misinterpreted as the phone being returned to its on-hook (idle) condition.   

Discuss different Routing plan adopted in a Telephone network.

Description : Discuss different Routing plan adopted in a Telephone network.

Last Answer : Hierarchical networks are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. Three methods are used for deciding on the route for a ... selection methods can be implemented. Computer based routing is a standard feature in data networks.  

Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Description : Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Last Answer : Subscriber Loop System: Every subscriber in a telephone network is connected generally to the nearest switching office by means of a dedicated pair of wires. Subscriber loop refers to this pair of wires. It is un ... 1. Diameter of wire 2. D.C. resistance per Km 3. Attenuation per Km 

What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Description : What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Last Answer : Traffic engineering provides the basis for analysis and design of telecommunication network to carry a given traffic at a particular loss probability. It provides a means to determine the quantum of common equipments ... A0  Where  A= offered traffic  A0 = carried traffic  A-A0= lost traffic    

Explain topology method used in LAN technology in detail.

Description : Explain topology method used in LAN technology in detail.

Last Answer : LAN Topologies: Network topology is a physical schematic which shows interconnection of the many users. There are four basic topologies as under: (i) Direct Connection or one to all topology ( ... temporarily, inserting the new node and then reestablishing the complete ring path.

List all seven layer of OSI model and describe function of application layer.

Description : List all seven layer of OSI model and describe function of application layer.

Last Answer : The layers of OSI model are as follows:  (1) The Physical Layer: This defines an interface in terms of the connections, voltage levels and data rate, in order for signals to ... with the applications programs needed. Examples include electronic mail, word processing, banking transactions, etc.  

Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Description : Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Last Answer : Folded network: When all the inlets/outlets are connected to the subscriber lines, the logical connection appears as shown in Fig. In this case, the output lines are folded back to the input ... non-folded network to be non-blocking, the network should support N simultaneous switching paths.  

Explain simple telephone communication system with circuit and equation of current flow in microphone?

Description : Explain simple telephone communication system with circuit and equation of current flow in microphone?

Last Answer : Simple Telephone Communication: In the simplest form of a telephone circuit, there is one way communication involving two entities, one receiving (listening) and the other transmitting (talking).   ... carrier wave in AM system. The quantity m is equivalent to the modulation index in AM. 

Explain crossbar exchange, with all call processing steps and diagrams

Description : Explain crossbar exchange, with all call processing steps and diagrams

Last Answer : The basic idea of crossbar switching is to provide a matrix of n x m sets of contacts with only n + m activators or less to select one of the n x m sets of contacts. This form of ... a contact is established at the cross point 6 such that the subscriber B is connected to the subscriber C. 

What are the advantages and disadvantages of packet switching over circuit switching?

Description : What are the advantages and disadvantages of packet switching over circuit switching?

Last Answer : The comparison of packet switching and circuit switching showing advantages and disadvantages of packet switching over circuit switching is given below: