Network Layer is used for (A) Breaking up the data in frames for transmission (B) Deal with Error correction (C) Automatic Recovery of Procedure (D) Physical Architecture

Network Layer is used for
 (A) Breaking up the data in frames for transmission
 (B) Deal with Error correction
 (C) Automatic Recovery of Procedure
 (D) Physical Architecture
by

1 Answer

Answer :

(D) Physical Architecture
by

Related questions

Explain the architecture of SS7 and compare with seven-layer OSI architecture.

Description : Explain the architecture of SS7 and compare with seven-layer OSI architecture.

Last Answer : A block schematic diagram of the CCITT no. 7 signaling system is shown in fig. Signal messages are passed from the central processor of the sending exchange to the CCS system. This consists of the microprocessor based ... part (TUE), the data user part(DUP) and the (ISDN) user part (ISDN-UP).  

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

What are the different types of distributing frames used in exchanges? Explain their importance.

Description : What are the different types of distributing frames used in exchanges? Explain their importance.

Last Answer : The different distribution frames used in exchange are shown in figure. Every subscriber in a telephone network is connected generally to the nearest switching office by means of a dedicated pair of ... . The subscriber cable pairs emanating from the exchange are also terminated on the MDF.  

Explain the basic architecture of digital switching systems. Explain in detail companding.

Description : Explain the basic architecture of digital switching systems. Explain in detail companding.

Last Answer : A simple N X N time division space switch is shown in Fig. The switch can be represented in an equivalence form as a two-stage network with N X 1 and 1 X N switching matrices for the first and ... = Parameter used to define the amount of compression  Vout = Compressed output voltage. 

ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Description : ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Last Answer : (B) Error in received data

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

Common channel signalling______________ (A) Uses the speech or data path for signaling. (B) Does not use the speech or data path for signaling. (C) Needs no additional transmission facilities. (D) Finds it difficult to handle signaling during speech.

Description : Common channel signalling______________ (A) Uses the speech or data path for signaling. (B) Does not use the speech or data path for signaling. (C) Needs no additional transmission facilities. (D) Finds it difficult to handle signaling during speech.

Last Answer : (C) Needs no additional transmission facilities.

_________control inthe datalink layer is based on automatic repeat request, which is the retransmission of data. A) Flow B) Error C) Transmission D) none of the above

Description : _________control inthe datalink layer is based on automatic repeat request, which is the retransmission of data. A) Flow B) Error C) Transmission D) none of the above

Last Answer : Transmission

A distributed network configuration in which all data/information pass through a central computer is (A) Bus network (B) Star network (C) Ring network (D) Point to point network

Description : A distributed network configuration in which all data/information pass through a central computer is (A) Bus network (B) Star network (C) Ring network (D) Point to point network

Last Answer : (B) Star network

The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Description : The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Last Answer : A. Data Link

In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, applicationB. physical, data link, network C. data link, network D. physical, data link

Description : In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, application B. physical, data link, network C. data link, network D. physical, data link

Last Answer : B. physical, data link, network

What are transmission bridges? How do they help in satisfying the connectivity?

Description : What are transmission bridges? How do they help in satisfying the connectivity?

Last Answer : A typical transmission bridge is shown in Fig. The series capacitance and the shunt inductances of the two relays provide a high-pass filter to transmit the AC speech signals, while the relays respond independently to the DC loop/disconnect signals from the calling and called customer.  

What are wired and wireless transmission systems? Explain the mechanisms of propagation of radio communication.

Description : What are wired and wireless transmission systems? Explain the mechanisms of propagation of radio communication.

Last Answer :  Transmission Systems: Modern long distance transmission systems can be placed under three broad categories: 1. Radio Systems 2. Coaxial cable systems 3. Optical fibre systems  ... microwave communication limited by horizon. 3. Troposphere scatter communication 4. Satellite communication. 

In a frame transmission, CRC stands for (A) Code Renewable Check (B) Cyclic Redundancy Check (C) Control and Refresh Code (D) Cyclic Refreshing of CPU

Description : In a frame transmission, CRC stands for (A) Code Renewable Check (B) Cyclic Redundancy Check (C) Control and Refresh Code (D) Cyclic Refreshing of CPU

Last Answer : (B) Cyclic Redundancy Check

List all seven layer of OSI model and describe function of application layer.

Description : List all seven layer of OSI model and describe function of application layer.

Last Answer : The layers of OSI model are as follows:  (1) The Physical Layer: This defines an interface in terms of the connections, voltage levels and data rate, in order for signals to ... with the applications programs needed. Examples include electronic mail, word processing, banking transactions, etc.  

What layers are covered under end to end layer connectivity? Explain briefly the function of each one of them.

Description : What layers are covered under end to end layer connectivity? Explain briefly the function of each one of them.

Last Answer : The layers 4-7 of ISO-OSI reference model communicate with peer entities in the end systems. There is no communication with entities in the intermediate systems. In this sense, layers 4-7 are often ... 6. Editors and terminal support services 7. Telematic services like videotext. 

What are the end-to-end layers of OSI structure? Explain the transport layer in detail.

Description : What are the end-to-end layers of OSI structure? Explain the transport layer in detail.

Last Answer : The layers 4-7 of ISO-OSI reference model communicate with peer entities in the end systems. There is no communication with entities in the intermediate systems. In this sense, ... tracking, connection flow control, sequencing of data, error checking, and application addressing and identification.

Discuss different Routing plan adopted in a Telephone network.

Description : Discuss different Routing plan adopted in a Telephone network.

Last Answer : Hierarchical networks are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. Three methods are used for deciding on the route for a ... selection methods can be implemented. Computer based routing is a standard feature in data networks.  

Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Description : Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Last Answer : Folded network: When all the inlets/outlets are connected to the subscriber lines, the logical connection appears as shown in Fig. In this case, the output lines are folded back to the input ... non-folded network to be non-blocking, the network should support N simultaneous switching paths.  

What are the major systems of a telecommunication network? Discuss in detail the subscriber loop systems.

Description : What are the major systems of a telecommunication network? Discuss in detail the subscriber loop systems.

Last Answer : The major systems of any telecommunication network may consist of the following major systems: 1. Subscriber end instruments or equipments 2. Subscriber loop systems 3. Switching ... exchange. The subscriber cable pairs emanating from the exchange are also terminated on the MDF.  

A two stage non-blocking network requires twice the number of switching elements as the single stage non-blocking network. (A) TRUE (B) FALSE

Description : A two stage non-blocking network requires twice the number of switching elements as the single stage non-blocking network. (A) TRUE (B) FALSE

Last Answer : Ans: (A)

The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Description : The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Last Answer : (D) Network service part (NSP)

Trunks are the lines that run between (A) Subscribers and exchange (B) Switching system and power plant (C) Local area network (D) Switching stations

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) Switching system and power plant (C) Local area network (D) Switching stations

Last Answer : (D) Switching stations

An important terminal that is required between DTE and PSTN is (A) Server (B) MODEM (C) Relay (D) Network card

Description : An important terminal that is required between DTE and PSTN is (A) Server (B) MODEM (C) Relay (D) Network card

Last Answer : (B) MODEM

Signalling transfer point (STP) exist in (A) Strowger exchange (B) SS7 (C) Local area network (D) PABX

Description : Signalling transfer point (STP) exist in (A) Strowger exchange (B) SS7 (C) Local area network (D) PABX

Last Answer : (B) SS7

In a single stage network: (A) There is no redundancy (B) There is redundancy (C) Alternative cross points are available (D) Alternative paths are available

Description : In a single stage network: (A) There is no redundancy (B) There is redundancy (C) Alternative cross points are available (D) Alternative paths are available

Last Answer : (B) There is redundancy

The function of ARQ in a network protocol is to: (A) Auto request (B) Acknowledge (C) Address request (D) Abort

Description : The function of ARQ in a network protocol is to: (A) Auto request (B) Acknowledge (C) Address request (D) Abort

Last Answer : (A) Auto request

In step by step switching line finders are connected to the (A) Calling subscriber. (B) Switching network. (C) Called subscriber. (D) Between exchanges.

Description : In step by step switching line finders are connected to the (A) Calling subscriber. (B) Switching network. (C) Called subscriber. (D) Between exchanges.

Last Answer : (A) Calling subscriber.

Trunks are the lines that run between (A) subscribers and exchange (B) switching system and power plant (C) Local Area Network (D) switching systems

Description : Trunks are the lines that run between (A) subscribers and exchange (B) switching system and power plant (C) Local Area Network (D) switching systems

Last Answer : (B) switching system and power plant

Network with point-to-point link is known as (A) Fully Connected Network (B) Half Connected Network (C) Duplex Connected Network (D) None of these

Description : Network with point-to-point link is known as (A) Fully Connected Network (B) Half Connected Network (C) Duplex Connected Network (D) None of these

Last Answer : (A) Fully Connected Network

For two stage network the switching elements for M inlets with r blocks and N outlets with s blocks is given by (A) Ms + Nr (B) Mr + Ns (C) (M + N) (r + s) (D) (M + N)rs

Description : For two stage network the switching elements for M inlets with r blocks and N outlets with s blocks is given by (A) Ms + Nr (B) Mr + Ns (C) (M + N) (r + s) (D) (M + N)rs

Last Answer : (A) Ms + Nr

The final selector is connected to the (A) calling subscriber. (B) switching network. (C) called subscriber. (D) line finder.

Description : The final selector is connected to the (A) calling subscriber. (B) switching network. (C) called subscriber. (D) line finder.

Last Answer : (C) called subscriber

A/An ______network is typically a company network that connects multiple company locations into a single network. (A) local area (B) enterprise (C) campus wide (D) protocol.

Description : A/An ______network is typically a company network that connects multiple company locations into a single network. (A) local area (B) enterprise (C) campus wide (D) protocol.

Last Answer : (B) enterprise

In a LAN network every system is identified by (A) Name (B) MAC address (C) IP Address (D) Serial number given by manufacturer

Description : In a LAN network every system is identified by (A) Name (B) MAC address (C) IP Address (D) Serial number given by manufacturer

Last Answer : (C) IP Address

Trunks are the lines that run between (A) Subscribers and exchange (B) switching system and power plant (C) Local area network. (D) Switching stations.

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) switching system and power plant (C) Local area network. (D) Switching stations.

Last Answer : (D) Switching stations.

The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET

Description : The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET

Last Answer : (A) Telephone, ATM

The number of point to point links required in a fully connected network for 50 entities is (A) 1250 (B) 1225 (C) 2500 (D) 50

Description : The number of point to point links required in a fully connected network for 50 entities is (A) 1250 (B) 1225 (C) 2500 (D) 50

Last Answer : Ans: (C)

Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes

Description : Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes

Last Answer : A. Checksum 

Breaking physical memory into fixed-sized bloclcs called as: (1) Packets (2) Page (3) Frames (4) Segments

Description : Breaking physical memory into fixed-sized bloclcs called as: (1) Packets (2) Page (3) Frames (4) Segments

Last Answer : Frames

What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Description : What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Last Answer : Modems are essentially used to interface digital circuits to transmit information on analogue channels like telephone systems. Modem (from modulator-demodulator) is a device that modulates an analogue carrier ... caused by the lines makes the detection even harder than amplitude modulation.   

Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Description : Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Last Answer : Classifications of Data Network:  Data Networks are classified according to their geographical coverage: Wide area networks (WANs) Metropolitan area networks(MANs) Local area ...  V.53 Limits for the maintenance of telephone type circuits used for data transmission. 

In a time division space switch the size of the control memory is N and its Width: (A)Log10M (B) LogeM (C) LogNM (D) Log2M Where N are the outlets and M the number of data samples

Description : In a time division space switch the size of the control memory is N and its Width: (A)Log10M (B) LogeM (C) LogNM (D) Log2M Where N are the outlets and M the number of data samples

Last Answer : Ans: (It should be 2 log2[N]

Broad Band ISDN handles data rate of about (A) 64 kbps (B) 100 mbps (C) 5.4 mbps (D) 2.048 mbps

Description : Broad Band ISDN handles data rate of about (A) 64 kbps (B) 100 mbps (C) 5.4 mbps (D) 2.048 mbps

Last Answer : (A) 64 kbps

ISDN handles data pertaining to (A) All digital services (B) Speech and Video (C) Computer data only (D) Speech only

Description : ISDN handles data pertaining to (A) All digital services (B) Speech and Video (C) Computer data only (D) Speech only

Last Answer : (A) All digital services

The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Last Answer : c. packets

The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Last Answer : C. packets

The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Last Answer : c) packets

The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Description : The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Last Answer : C. data link

The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Description : The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Last Answer : d. An error has been made in the transmission and the correct version isH..

The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Description : The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Last Answer : d. An error has been made in the transmission and the correct version isH..