Telex is a (A) Telephone Service between various subscribers (B) Tele printer Service between various subscribers (C) Television Service between various subscribers (D) Telegraph Service between various subscribers

Telex is a
 (A) Telephone Service between various subscribers
(B) Tele printer Service between various subscribers
(C) Television Service between various subscribers
(D) Telegraph Service between various subscribers
by

1 Answer

Answer :

(B) Tele printer Service between various subscribers
by

Related questions

Example of circuit switching and S&F (Stored and Forward) switching is (A) Telephone and Post of Telegraph (B) Video Signal Post or Telegraph (C) Digital Signal Post or Telegraph (D) None of above

Description : Example of circuit switching and S&F (Stored and Forward) switching is (A) Telephone and Post of Telegraph (B) Video Signal Post or Telegraph (C) Digital Signal Post or Telegraph (D) None of above

Last Answer : (A) Telephone and Post of Telegraph

Trunks are the lines that run between (A) Subscribers and exchange (B) Switching system and power plant (C) Local area network (D) Switching stations

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) Switching system and power plant (C) Local area network (D) Switching stations

Last Answer : (D) Switching stations

Trunks are the lines that run between (A) subscribers and exchange (B) switching system and power plant (C) Local Area Network (D) switching systems

Description : Trunks are the lines that run between (A) subscribers and exchange (B) switching system and power plant (C) Local Area Network (D) switching systems

Last Answer : (B) switching system and power plant

Busy hour traffic is the (A) maximum average simultaneous traffic. (B) traffic during peak hour. (C) traffic when all subscribers are engaged. (D) the duration of maximum calls.

Description : Busy hour traffic is the (A) maximum average simultaneous traffic. (B) traffic during peak hour. (C) traffic when all subscribers are engaged. (D) the duration of maximum calls.

Last Answer : (B) traffic during peak hour.

Trunks are the lines that run between (A) Subscribers and exchange (B) switching system and power plant (C) Local area network. (D) Switching stations.

Description : Trunks are the lines that run between (A) Subscribers and exchange (B) switching system and power plant (C) Local area network. (D) Switching stations.

Last Answer : (D) Switching stations.

Discuss different Routing plan adopted in a Telephone network.

Description : Discuss different Routing plan adopted in a Telephone network.

Last Answer : Hierarchical networks are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. Three methods are used for deciding on the route for a ... selection methods can be implemented. Computer based routing is a standard feature in data networks.  

Explain simple telephone communication system with circuit and equation of current flow in microphone?

Description : Explain simple telephone communication system with circuit and equation of current flow in microphone?

Last Answer : Simple Telephone Communication: In the simplest form of a telephone circuit, there is one way communication involving two entities, one receiving (listening) and the other transmitting (talking).   ... carrier wave in AM system. The quantity m is equivalent to the modulation index in AM. 

Write short notes (i)Telephone hand set and it’s working. (ii) CPU based exchange

Description : Write short notes (i)Telephone hand set and it’s working. (ii) CPU based exchange

Last Answer : (i) A standard telephone set is comprised of a transmitter, a receiver, and electrical network for equalization, associated circuitry to control side tone levels and to regulate signal power, ... commands are designed to be of variable length necessitating the use of an end-of-command symbol  

What is the need of a hybrid in telephone networks? How does it work?

Description : What is the need of a hybrid in telephone networks? How does it work?

Last Answer :  Digital exchanges require receive and transmit signals on separate two-wire circuits. This calls for two-wire to four-wire conversion. Such a conversion is normally required for trunk transmissions in ... from the subscriber end is completely nullified from coupling into the winding A.  

What is store program control (SPC)? Give the organization of centralized SPC. Discuss the advantages of SPC automation in telephone switching.

Description : What is store program control (SPC)? Give the organization of centralized SPC. Discuss the advantages of SPC automation in telephone switching.

Last Answer :  In stored program control systems, a program or set of instructions to the computer is stored in its memory and the instructions are executed automatically one by one by the processor. Carrying out ... of services can be provided to customers.  (v) Increase level of automotive in switching 

A certain amount of side tone is essential in telephone communication (A) TRUE (B) FALSE

Description : A certain amount of side tone is essential in telephone communication (A) TRUE (B) FALSE

Last Answer : Ans: (A)

Engaged tone is generated in the: (A) Telephone instrument of calling subscriber (B) Telephone instrument of called subscriber (C) Exchange (D) Repeater

Description : Engaged tone is generated in the: (A) Telephone instrument of calling subscriber (B) Telephone instrument of called subscriber (C) Exchange (D) Repeater

Last Answer : (C) Exchange

Telephone Traffic is measured in (A) Seconds. (B) Hours. (C) Erlang (D) Pulses per minute.

Description : Telephone Traffic is measured in (A) Seconds. (B) Hours. (C) Erlang (D) Pulses per minute.

Last Answer : (C) Erlang

Distortion caused on telephone line by an adjacent one is called (A) Cross Fire (B) Inductive Disturbance (C) Cross Talk (D) None of these

Description : Distortion caused on telephone line by an adjacent one is called (A) Cross Fire (B) Inductive Disturbance (C) Cross Talk (D) None of these

Last Answer : (C) Cross Talk

The bandwidth requirement of a telephone channel is (A) 3 KHz (B) 15 KHz (C) 5 KHz (D) 25 KHz

Description : The bandwidth requirement of a telephone channel is (A) 3 KHz (B) 15 KHz (C) 5 KHz (D) 25 KHz

Last Answer : (A) 3 KHz

The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET

Description : The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET

Last Answer : (A) Telephone, ATM

A sample rate of ________is required for a good quality representation of telephone conversation. (A) 4500 times per second. (B) 700 integer sample points per minute. (C) 50 times per second per mile of distance travelled. (D) 8000 times per second.

Description : A sample rate of ________is required for a good quality representation of telephone conversation. (A) 4500 times per second. (B) 700 integer sample points per minute. (C) 50 times per second per mile of distance travelled. (D) 8000 times per second.

Last Answer : (C) 50 times per second per mile of distance travelled.

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

Telephone companies normally provide a voltage of __________to power telephones. (A) +24 volts DC (B) -24 volts DC (C) +48 volts DC (D) -48 volts DC.

Description : Telephone companies normally provide a voltage of __________to power telephones. (A) +24 volts DC (B) -24 volts DC (C) +48 volts DC (D) -48 volts DC.

Last Answer : (D) -48 volts DC.

Describe the various signalling techniques. Compare in-channel signalling with common channel signaling, which is more advantageous.

Description : Describe the various signalling techniques. Compare in-channel signalling with common channel signaling, which is more advantageous.

Last Answer : Signaling systems link the variety of switching systems, transmission systems and subscriber equipments in telecommunication network to enable the network to function as a whole. Three forms of signaling are ... for passing control signals for a group of trunks or information       

Which type of switching is used in Internet? (1) Circuit (2) Telephone (3) Packet (4) Telex

Description : Which type of switching is used in Internet? (1) Circuit (2) Telephone (3) Packet (4) Telex

Last Answer : Packet

What is ‘Teletext’ ? (1) Flashing of telephone conversation on TV screen. (2) Printing the text of the message on the telex machine. (3) Connecting the local telephone with outstation telephones without STD codes. (4) Flashing of the text of news and information on the TV screen.

Description : What is ‘Teletext’ ? (1) Flashing of telephone conversation on TV screen. (2) Printing the text of the message on the telex machine. (3) Connecting the local telephone with outstation telephones without STD codes. (4) Flashing of the text of news and information on the TV screen.

Last Answer : Flashing of the text of news and information on the TV screen. 

What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Description : What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Last Answer : Traffic engineering provides the basis for analysis and design of telecommunication network to carry a given traffic at a particular loss probability. It provides a means to determine the quantum of common equipments ... A0  Where  A= offered traffic  A0 = carried traffic  A-A0= lost traffic    

What is Grade of service and blocking probability? What are delay systems in telecommunication networks?

Description : What is Grade of service and blocking probability? What are delay systems in telecommunication networks?

Last Answer : Grade of service: In loss systems, the traffic carried by the network is generally lower than the actual traffic offered to the network by the subscribers. The overload traffic is rejected ... Switching Packet Switching Digit Receiver access Automatic Call distribution Call Processing  

The larger the Grade Of Service, the worse is the service given (A) TRUE (B) FALSE

Description : The larger the Grade Of Service, the worse is the service given (A) TRUE (B) FALSE

Last Answer : Ans: (A)

The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Description : The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Last Answer : (D) Network service part (NSP)

The grade of service is measured in (A) Percentage (B) Number (C) Fractional Number (D) Logarithmic Number

Description : The grade of service is measured in (A) Percentage (B) Number (C) Fractional Number (D) Logarithmic Number

Last Answer : (C) Fractional Number

Describe how dialed digits are transferred from a subscriber’s telephone tothe local exchange?

Description : Describe how dialed digits are transferred from a subscriber’s telephone tothe local exchange?

Last Answer : dbbrkm

The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber’s telephone set to another telephone set in an adjacent room B. a two-wire or four-wire communication circuit between the customer’s premise and central office C. a four-wire circuit connecting a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Description : The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber's telephone set to another telephone set in an adjacent room B. a two-wire or four- ... a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Last Answer : B. a two-wire or four-wire communication circuit between the customer’s premise and central office

Using fiber-optic cable in a telephone system except for the connection to the subscriber’s phone is called: a. FDDI b. FTTC c. FITL d. SONET

Description : Using fiber-optic cable in a telephone system except for the connection to the subscriber’s phone is called: a. FDDI b. FTTC c. FITL d. SONET

Last Answer : b. FTTC

What came first the telegraph or the telephone?

Description : What came first the telegraph or the telephone?

Last Answer : The telegraph.

The diagrams shown in the illustration represent a/an _______________. EL-0093 A. engine order telegraph circuit B. rudder angle indicator arrangement C. engine speed tachometer with repeaters D. sound powered telephone system

Description : The diagrams shown in the illustration represent a/an _______________. EL-0093 A. engine order telegraph circuit B. rudder angle indicator arrangement C. engine speed tachometer with repeaters D. sound powered telephone system

Last Answer : Answer: D

This is a method of using a Wheatstone brdige to determine the distance from the test point to a fault in a telephone or telegraph line or cable.

Description : This is a method of using a Wheatstone brdige to determine the distance from the test point to a fault in a telephone or telegraph line or cable.

Last Answer : varmeter/reactive VA meter

2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories

Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories

Last Answer : b) Qualcomm

What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Description : What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Last Answer :  Numbering and Addressing: In telephone and data networks, the end equipments are more often single units than multiple devices units like PABX or LAN. Historically, a telephone, a computer, or a ... as reference point may also be addressed by using direct inward dialing (DID) feature.  

Explain the process of inter-register signalling.

Description : Explain the process of inter-register signalling.

Last Answer : Registers are used in common control exchanges to store and analyze routing data. They are provided on a common basis is a single register provides routing data for a number of speech circuits. Once a call ... it is released and the originating register signals to the next register.

Draw a centralized SPC organization and explain how it works under load sharing operation.

Description : Draw a centralized SPC organization and explain how it works under load sharing operation.

Last Answer : In centralized control, all the control equipment is replaced by a single processor which must be quite powerful. It must be capable of processing 10 to 100 calls per second, depending on the ... both the processors are active simultaneously and share the load and the resources dynamically.  

Explain FDM and show how CCITT standards help in building the base band?

Description : Explain FDM and show how CCITT standards help in building the base band?

Last Answer : Frequency Division Multiplexing: It is the process of combining several information channels by shifting their signals to different frequency groups within the spectrum so that they can be transmitted simultaneously ... of 24 channels were assembled together in one stage of modulation.     

What are transmission bridges? How do they help in satisfying the connectivity?

Description : What are transmission bridges? How do they help in satisfying the connectivity?

Last Answer : A typical transmission bridge is shown in Fig. The series capacitance and the shunt inductances of the two relays provide a high-pass filter to transmit the AC speech signals, while the relays respond independently to the DC loop/disconnect signals from the calling and called customer.  

What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Description : What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Last Answer : Here three different designing methods for 100 line exchange are discussed: Design 1: Here, Strowger switching system is designed using one two-motion selector for each subscriber. A ... only under certain specific traffic conditions and generally lead to higher blocking probabilities.  

How numbering plan is achieved in modern telephony? Give the structure with example.

Description : How numbering plan is achieved in modern telephony? Give the structure with example.

Last Answer :  The objective of numbering plan is to uniquely identify every subscriber connected to a telecommunication network. A numbering plan may be open, semiopen or closed. An open-numbering plan permits wide ... known as the subscriber number which is the number listed in the telephone directory.   

How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Description : How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Last Answer : Pulse dialing: 1. Generated through make and break contact. 2. DC Current pulse is generated. 3. Each number is separated by a short pause to prevent overlapping. 4. Codes ... dialing pulse is not misinterpreted as the phone being returned to its on-hook (idle) condition.   

Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Description : Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Last Answer : Subscriber Loop System: Every subscriber in a telephone network is connected generally to the nearest switching office by means of a dedicated pair of wires. Subscriber loop refers to this pair of wires. It is un ... 1. Diameter of wire 2. D.C. resistance per Km 3. Attenuation per Km 

Explain topology method used in LAN technology in detail.

Description : Explain topology method used in LAN technology in detail.

Last Answer : LAN Topologies: Network topology is a physical schematic which shows interconnection of the many users. There are four basic topologies as under: (i) Direct Connection or one to all topology ( ... temporarily, inserting the new node and then reestablishing the complete ring path.

List all seven layer of OSI model and describe function of application layer.

Description : List all seven layer of OSI model and describe function of application layer.

Last Answer : The layers of OSI model are as follows:  (1) The Physical Layer: This defines an interface in terms of the connections, voltage levels and data rate, in order for signals to ... with the applications programs needed. Examples include electronic mail, word processing, banking transactions, etc.  

Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Description : Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Last Answer : Folded network: When all the inlets/outlets are connected to the subscriber lines, the logical connection appears as shown in Fig. In this case, the output lines are folded back to the input ... non-folded network to be non-blocking, the network should support N simultaneous switching paths.  

Explain crossbar exchange, with all call processing steps and diagrams

Description : Explain crossbar exchange, with all call processing steps and diagrams

Last Answer : The basic idea of crossbar switching is to provide a matrix of n x m sets of contacts with only n + m activators or less to select one of the n x m sets of contacts. This form of ... a contact is established at the cross point 6 such that the subscriber B is connected to the subscriber C. 

What are the advantages and disadvantages of packet switching over circuit switching?

Description : What are the advantages and disadvantages of packet switching over circuit switching?

Last Answer : The comparison of packet switching and circuit switching showing advantages and disadvantages of packet switching over circuit switching is given below:

What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Description : What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Last Answer : Modems are essentially used to interface digital circuits to transmit information on analogue channels like telephone systems. Modem (from modulator-demodulator) is a device that modulates an analogue carrier ... caused by the lines makes the detection even harder than amplitude modulation.   

What are the advantages of CCS over in-channel signalling?

Description : What are the advantages of CCS over in-channel signalling?

Last Answer : The advantages of CCS over in-channel signalling are listed below: a. Information can be exchange between the processors much more rapidly than when channel associated signaling is used. b ... for functions other than call processing, for example for maintenance or network management purposes.