Description : How many 5 cm square tiles are needed to tile the floor of a bathroom 1.8 m wide and 2.2 m long?
Last Answer : 1 m = 100 cmAcross the 1.8 m wall you will get 1.8m 5 cm = (1.8 100) cm 5 cm = 180/5 = 36 tilesAcross the 2.2 m wall you will get 2.2m 5 cm = (2.2 100) cm ... 36 tiles = 44 36 = 1584 tiles (atleast - when buying tiles for such a project extra should bepurchased to allow for breakages).
Description : The maximum thickness of concrete floor of a cement warehouse, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm
Last Answer : (D) 25 cm
Description : ormal size of brick used in India is a) 22 x 11.2 x 7 cm* b) 25 x 16 x 8 cm c) 19 x 12 x 9 cm d) 20 x 10 x 5 cm
Last Answer : a) 22 x 11.2 x 7 cm*
Description : The size of modular bricks, is (A) 10 × 10 × 9 cm (B) 19 × 9 × 9 cm (C) 22.5 × 10 × 8.5 cm (D) 22.5 × 8.0 × 9 cm
Last Answer : Answer: Option B
Description : Rotary drilling (A) Is not suitable for deposits containing very coarse gravel (B) Hinders the ground water observations and permeability test (C) Is not economical for holes of less than 10 cm (D) All the above
Last Answer : Answer: Option D
Description : The skirting/dado in a bath roof should be upto (A) Ceiling (B) 15 cm above floor level (C) 200 cm (D) Level of the tap
Last Answer : Answer: Option C
Description : If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm
Description : A short masonry pillar is 60 cm x 60 cm in cross-section, the core of the pillar is a square whose side is (A) 17.32 cm (B) 14.14 cm (C) 20.00 cm (D) 22.36 cm
Last Answer : (B) 14.14 cm
Description : An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is ... breadth of the flange is (A) 300 cm (B) 233 cm (C) 176 cm (D) 236 cm
Description : The thickness of a laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge of the plate is (a) 0.32 m (b) 0.22 m (c) 0.40 m (d) 0.53 m
Last Answer : Ans: (c) Correct Answer is: 0.45 m
Description : ______ finds the value of thesignal amplitudefor eachsample; ____ finds the change from the previous sample. A) DM; PCM B) PCM; DM C) DM; CM D) none of the abov
Last Answer : PCM; DM
Description : Can brick, stone, or marble tile / pavers be used on a floor with a basement underneath it, in a new house to be constructed?
Last Answer : It’s quite possible. You just need to make sure your plans account for the weight. I know of several floors that have stone and marble tile over crawlspaces.
Description : My laptop just fell 3 feet and hit a ceramic tile floor. It appears to be working fine and is fully backed up. Anything I need to check / any diagnostics I should do?
Last Answer : I would run exhaustive tests on the Hard Disk. It could have damaged sectors.
Description : Best and safest way to completely disinfect a tile kitchen floor?
Last Answer : answer:Depends on the type of flooring material. Is it tile in squares, or linoleum that comes in a roll and is laid? How old do you think it is? One of the problems with using soap based things ... job. I like it because it's not oily and doesn't leave residue like the pine cleaners sometimes do.
Description : How do I clean spilled fabric softener on a tile floor?
Last Answer : Wife says to use rubbing alcohol. it should cut some of the oil in the fabric softner. be sure not to breathe the alcohol fumes.
Description : Any tips for removing old vinyl tile from a floor?
Last Answer : You need a floor scraper. Don’t get a cheap one either, or it won’t work very well. Either that, or lay the new floor over it.
Description : How do I clean chemical residue from a kitchen tile floor? I think the floor is ceramic.?
Last Answer : You will need water, liquid detergent, soap, brush and vegetable oil. Spread a mixture of water and liquid soap and detergent on the ceramic floor and let it work for a few minutes. With a mop ... wash the floor with bleach will increase the dose every time it fades. This only worsens the abrasion.
Description : Why would i use square meters to measure a floor tile?
Last Answer : Need answer
Description : What unit would you use to measure the perimeter of a floor tile?
Description : How to Clean and Preserve a Marble Tile Floor?
Last Answer : Marble tile looks beautiful in any room of the house and formany people it is worth the investment. It is important, however,to clean and preserve your marble tile so that it can stay lookingbeautiful ... tiles with a solution that is neutral on the pHscale. It is important to never clean marb
Description : Need a lot of home repairs roof Leaking, floor tile bathroom coming off of floor, toilet leaks not able to use bedroom no insulation on home addition. plaster falling from ceiling ,retired on fixed income?
Last Answer : Where can I get grants that don,t need to pay bacK?
Description : What type of adhesive should I use to reattach a loose floor tile?
Last Answer : Mastic is a common adhesive for floor tile. It is laid with a notched trowel to ensure that there are grooves in the adhesive that allow for expansion once the tile is replaced. Using a damp cloth, be sure to wipe up any excess that oozes up to the surface.
Description : What do I have to do to prep the floor before I install floor tile?
Last Answer : Mainly all it involves is removing old flooring and getting down to your basic floor structure. Tile can usually be laid over any surface that is in good condition. If there are bumps, tears, or anything like that its going to involve a little sanding to even the surface up.
Description : What should I know before installing floor tile?
Last Answer : You should know the measurements of the space to be tiled and the measurements of the tile that you plan to buy. Before installing tile you will need to repair any cracks, bumps or dips. ... instructions listed on the tiles you have picked out so make sure you read these carefully before starting.
Description : What type of underlayment do you need when installing tile floor?
Last Answer : Before installing tile flooring, you need a clean FLAT surface. Tile is not a flexible material so the flat surface ensures the tile will match up correctly. You also need to sand the underneath ... will be able to form a cohesive nature with tile and permanently fix the tile to the surface.
Description : Floor Tile Adhesive?
Last Answer : form_title= Floor Tile Adhesive form_header= Keep the floor tile looking nice with an adhesive. Do you need to remove current flooring?*= () Yes () No What is the square footage of the area?*= _ [50] What type of tile are you installing?*= _ [50]
Description : What is a good brand of tile floor scrubber?
Last Answer : A good brand of tile floor scrubber is first generation. It is good becasue it really works and it is environmentally friendly so it will be better for the earth
Description : Does Earthing occur if I work, stand, or walk barefooted on a ceramic tile floor?
Last Answer : It depends on whether the tile floor sits on A. It depends on whether the tile floor sits on a concrete slab or on the ground. If directly on a ncrete slab or on the ground. If directly ... wil the surface will, like glass, probably prevent l, like glass, probably prevent conductivity. Back to Top
Description : A first class brick when immersed in cold water for 24 hours should not absorb water more than (A) 15 % (B) 20 % (C) 22 % (D) 25 %
Description : The standard size of masonry bricks, is (A) 18 cm × 8 cm × 8 cm (B) 19 cm × 9 cm × 9 cm (C) 20 cm × 10 cm × 10 cm (D) 21 cm × 11 cm × 11 cm
Description : If a ‘vertical aerial photograph’, (20 cm x 20 cm) in size, on a R.F.I: 10,000, has 60% longitudinal overlap and 40% side overlap, the actual ground length covered by each photograph in the longitudinal direction of the flight will be : (a) 4 km (b) 6 km (c) 0.8 km (d) 0.4 km
Last Answer : .8
Description : A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m
Last Answer : a. 22.2 m
Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th
Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26
Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th
Last Answer : In conclusion, the range of data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, and 20 is 26.
Last Answer : (d) In a given data, maximum value = 32 and minimum value = 6 We know, range of the data = maximum value – minimum value = 32 – 6 = 26 Hence, the range of the given data is 26.
Description : Bottom openings 15 cm × 15 cm in the standing baffle wall are provided A. 15 cm c/c B. 22.5 cm c/c C. 30 cm c/c D. 50 cm c/c
Last Answer : ANS: B
Description : For the construction of cement concrete floor, the maximum permissible size of aggregate, is (A) 4 mm (B) 6 mm (C) 8 mm (D) 10 mm
Description : 1. A concave lens has focal length of 20 cm. At what distance from the lens a 5 cm tall object be placed so that it forms an image at 15 cm from the lens? Also calculate the size of the image formed. [Delhi] -Chemistry-10
Last Answer : Answer. hope this helps youu
Description : A concave lens has focal length of 20 cm. At what distance from the lens a 5 cm tall object be placed so that it forms an image at 15 cm from the lens? Also calculate the size of the image formed. -Physics
Last Answer : Answer. I hope it helped you.
Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm
Description : The expected out turn of 2.5 cm cement concrete floor per mansion per day (A) 2.5 sqm (B) 5.0 sqm (C) 7.5 sqm (D) 10 sqm
Last Answer : (C) 7.5 sqm
Description : If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm
Description : For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm
Description : According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm
Last Answer : Answer: Option A
Description : The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm
Description : According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm
Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm
Description : The raft slab is projected beyond the outer walls of the structure by (A) 5 to 10 cm (B) 15 to 20 cm (C) 25 to 30 cm (D) 30 to 45 cm
Description : The advantage of reinforced concrete, is due to (A) Monolithic character (B) Fire-resisting and durability (C) Economy because of less maintenance cost (D) All the abov