Description : The minimum thickness of walls built in cement mortar (1 : 6) for a single storey building, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm
Last Answer : Answer: Option C
Description : According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm
Description : If the effective plan area of a warehouse is 54 sq. m, and maximum height of piles permitted is 270 cm, the number of cement bags to be stored, is (A) 2000 bags (B) 2200 bags (C) 2400 bags (D) 2700 bags
Last Answer : Answer: Option D
Description : If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm
Description : The expected out turn of 2.5 cm cement concrete floor per mansion per day (A) 2.5 sqm (B) 5.0 sqm (C) 7.5 sqm (D) 10 sqm
Last Answer : (C) 7.5 sqm
Description : In horizontal D.P.C, thickness of cement concrete (1 : 2 : 4) is (A) 2 cm (B) 4 cm (C) 6 cm (D) 8 cm
Last Answer : Answer: Option B
Description : Minimum thickness of the base of a flexible pavement, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm
Last Answer : Answer: Option A
Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3
Last Answer : (B) 0.94 m3
Description : For the construction of cement concrete floor, the maximum permissible size of aggregate, is (A) 4 mm (B) 6 mm (C) 8 mm (D) 10 mm
Description : Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these
Description : Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm
Description : For different layers of cement concrete floor. Pick up the incorrect statement from the following: (A) The lowest layer consists of consolidated ground (B) A 10 cm thick clean sand is laid on consolidated ground (C) ... sand (D) A 10 cm thick cement concrete (1 : 2 : 4) is laid on top layer
Last Answer : Option D
Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm
Description : According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than (A) 20 cm (B) 30 cm (C) 40 cm (D) 75 cm
Description : For compacting plain concrete road surface of thickness less than 20 cm, we use (A) Internal vibrator (B) Screed vibrator (C) Form vibrator (D) None of these
Description : For compacting plain concrete road surface of thickness less than 20 cm, the following vibrator is used. [ A ] Internal vibrator [ B ] Screed vibrator [ C ] Form vibrator [ D ] None of the above
Last Answer : [ B ] Screed vibrator
Description : The concrete under water minimum grade of cement recommended by IS code a) M 10 b) M 15 c) M 20* d) M 25
Last Answer : c) M 20*
Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90
Last Answer : [ B ] 0.25 to 0.30
Description : A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm
Description : The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm
Description : For a poorly graded sub-grade soil, thickness of sub-base, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 30 cm
Description : Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these
Last Answer : (A) 10 cm
Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm
Description : In case of hand mixing of concrete, the extra cement to be added is (A) 5 % (B) 10 % (C) 15 % (D) 20 %
Last Answer : (B) 10 %
Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%
Last Answer : (b) 10 to 15%
Description : If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d
Description : For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %
Description : A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm
Last Answer : (C) 25 cm
Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the ... , is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm
Last Answer : (C) 20 mm
Description : A cylinder is said to be thin if the ratio of its thickness and diameter, is less than (A) 1/25 (B) 1/20 (C) 1/15 (D) 1/10
Last Answer : (D) 1/10
Description : The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm
Description : A cement concrete road is 1000 m long, 8 m wide and 15 cm thick over the sub-base of 10 cm thick gravel. The box cutting in road crust is (A) 500 m3 (B) 1000 m3 (C) 1500 m3 (D) 2000 m3
Last Answer : (C) 1500 m3
Description : To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm
Description : To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these
Description : Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters
Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material
Description : For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm
Description : According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm
Description : The size of a floor tile commonly used, is (A) 15 cm × 15 cm × 1.8 cm (B) 20 cm × 20 cm × 2 cm (C) 22.5 × 22.5 cm × 2.2 cm (D) All the abov
Description : Minimum grade of concrete to be used in reinforced concrete as per IS: 4561978 is (A) M 15 (B) M 20 (C) M 10 (D) M 25
Description : The strength of concrete after one year as compared to 28 days strength is about (A) 10 to 15% more (B) 15 to 20% more (C) 20 to 25% more (D) 25 to 50% more
Description : A concrete structure is set on fire and the temperature raises to 1000°C. The strength of concrete as compared to original strength reduces to (A) 10 % (B) 15 % (C) 20 % (D) 25 %
Description : Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%
Last Answer : (a) 10 to 15%
Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time
Description : The thickness of the topping of a ribbed slab, varies between (A) 3 cm to 5 cm (B) 5 cm to 8 cm (C) 8 cm to 10 cm (D) 12 cm to 15 cm
Description : Thickness of broken line markings on multi-lane road for lanes is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm
Description : Thickness of broken centre line markings for a four lane road, is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm
Description : In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2 (D) 400 kg/cm
Description : A certain thickness of the coal, if stored unscientifically on soft (katcha) ground having no metallic/concrete flooring gets sunked into the ground, which is termed as the 'carpet loss'. The carpet loss may be of the order of __________ cms. (A) 1 to 2 (B) 3 to 4 (C) 5 to 15 (D) 20 to 40
Last Answer : (C) 5 to 15
Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm