A prime coat is given to steel work with (A) An oxide of iron paint (B) A mixture of white lead and lead paint (C) A special paint (D) Cement paint

A prime coat is given to steel work with
(A) An oxide of iron paint
(B) A mixture of white lead and lead paint
(C) A special paint
(D) Cement paint
by

1 Answer

Answer :

Answer: Option B
by

Related questions

When the bituminous surfacing is done on already existing black top road or over existing cement concrete road, the type of treatment given is (A) Seal coat (B) Tack coat (C) Prime coat (D) Spray of emulsion

Description : When the bituminous surfacing is done on already existing black top road or over existing cement concrete road, the type of treatment given is (A) Seal coat (B) Tack coat (C) Prime coat (D) Spray of emulsion

Last Answer : Answer: Option B

Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as (A) Quick setting cement (B) Rapid hardening cement (C) White cement (D) Low heat Portland cement

Description : Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as (A) Quick setting cement (B) Rapid hardening cement (C) White cement (D) Low heat Portland cement

Last Answer : Answer: Option C

White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Description : White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Last Answer : [ D ] Iron oxide

While painting with red oxide paint, a little quantity of ………..shall be added to the paint while doing the first coat to distinguish it from the second coat a) little blue paint b) lamp black* c) red paint d) green paint

Description : While painting with red oxide paint, a little quantity of ………..shall be added to the paint while doing the first coat to distinguish it from the second coat a) little blue paint b) lamp black* c) red paint d) green paint

Last Answer : b) lamp black*

In areas where there is severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339* b) One coat of zinc chromate priming to IS : 104 e) Two cover coats of red oxide paint to IS :123 f) One coat of zinc chrome - red oxide priming to IS : 2074

Description : In areas where there is severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339* b) One coat of zinc chromate priming to IS : 104 e) Two cover coats of red oxide paint to IS :123 f) One coat of zinc chrome - red oxide priming to IS : 2074

Last Answer : a) Two coats of aluminium paint to IS : 2339*

In areas where there is no severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339 b) One coat of zinc chromate priming to IS : 104 c) Two cover coats of red oxide paint to IS :123* d) One coat of zinc chrome - red oxide priming to IS : 2074

Description : In areas where there is no severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339 b) One coat of zinc chromate priming to IS : 104 c) Two cover coats of red oxide paint to IS :123* d) One coat of zinc chrome - red oxide priming to IS : 2074

Last Answer : c) Two cover coats of red oxide paint to IS :123*

Which of the following is used for wrapping of fractured bones? (1) White cement (2) White lead (3) Zinc oxide (4) Plaster of Paris

Description : Which of the following is used for wrapping of fractured bones? (1) White cement (2) White lead (3) Zinc oxide (4) Plaster of Paris

Last Answer : (4) Plaster of Paris Explanation: Plaster of Paris is a plaster made by calcining gypsum. It can be used to impregnate gauze bandages to make a sculpting material called modroc. It is used ... (and sometimes still is) used to make classic plaster orthopedic casts to protect limbs with broken bones.

Which of the following is used for wrapping of fractured bones? (1) White cement (2) White lead (3) Zinc oxide (4) Plaster of Paris

Description : Which of the following is used for wrapping of fractured bones? (1) White cement (2) White lead (3) Zinc oxide (4) Plaster of Paris

Last Answer :  Plaster of Paris

The commonly used base for iron and steel work, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Description : The commonly used base for iron and steel work, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Last Answer : Answer: Option A

Raw materials used for producing __________ cement does not contain iron oxide. (A) Waterproof (B) Slag (C) White (D) Pozzolan

Description : Raw materials used for producing __________ cement does not contain iron oxide. (A) Waterproof (B) Slag (C) White (D) Pozzolan

Last Answer : (C) White

Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water bound macadam during bituminous road construction (C) Seal coat is the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Description : Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water ... the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Last Answer : Answer: Option D

The minimum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Alumina (D) Lime

Description : The minimum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Alumina (D) Lime

Last Answer : Answer: Option A

The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Description : The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Last Answer : Answer: Option D

Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Description : Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Last Answer : Answer: Option D

Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : Lime : Iron oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Description : Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : ... oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Last Answer : Answer: Option A

Efflorescence is cement is caused due to the excess of (a) Lime (b) Silica (c) Alkalies (d) Iron oxide

Description : Efflorescence is cement is caused due to the excess of (a) Lime (b) Silica (c) Alkalies (d) Iron oxide

Last Answer : (c) Alkalies

In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Description : In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Last Answer : (d) Iron oxide

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Description : The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Last Answer : (a) 63:22:6:3

The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Description : The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Last Answer : (c) Lime

Chief constituent of ordinary Portland cement is [ A ] Lime [ B ] Alumina [ C ] Magnesia [ D ] Iron oxide

Description : Chief constituent of ordinary Portland cement is [ A ] Lime [ B ] Alumina [ C ] Magnesia [ D ] Iron oxide

Last Answer : [ A ] Lime

Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Description : Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Last Answer : [ A ] Alkalies

The minimum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Description : The minimum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Last Answer : [ D ] Magnesium oxide

The maximum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Description : The maximum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Last Answer : [ C ] Lime

Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Last Answer : (C) Steel or cement-brick lined

Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Description : Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Last Answer : (C) Cast iron

Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Description : Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Last Answer : Option C

Pick up the correct statement from the following: (A) Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish (B) Cracked paints may be cured by removing paint and giving a fresh coat of paint (C) Crawling paints may be cured by sand preparing the surface and giving a fresh coat with plenty of turps (D) All the above

Description : Pick up the correct statement from the following: (A) Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish (B) Cracked paints may be cured by ... sand preparing the surface and giving a fresh coat with plenty of turps (D) All the above

Last Answer : Answer: Option D

What is a mixture of Potassium Nitrate Powdered Charcoal and Sulphur called? A. Paint B. Glass C. Gun Powder (Answer) D. Cement

Description : What is a mixture of Potassium Nitrate Powdered Charcoal and Sulphur called? A. Paint B. Glass C. Gun Powder (Answer) D. Cement

Last Answer : C. Gun Powder (Answer)

The pigment used in paints for corrosive resistance, is (A) White lead (B) Ferrous oxide (C) Zinc white (D) Red lead

Description : The pigment used in paints for corrosive resistance, is (A) White lead (B) Ferrous oxide (C) Zinc white (D) Red lead

Last Answer : Answer: Option D

Assertion A : Paints with white lead base are not recommended for painting of iron works. Reason R : Paints with white lead base do not check rusting of iron. Select your answer according to the coding system given below: (A) Both A and R is true and, R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Paints with white lead base are not recommended for painting of iron works. Reason R : Paints with white lead base do not check rusting of iron. Select your answer according to the coding system given below: ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Description : Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Last Answer : b) Free lime content*

Which oxide of the following metals is often used as a pigment in white paint? w) titanium x) cobalt y) nickel z) vanadium

Description : Which oxide of the following metals is often used as a pigment in white paint? w) titanium x) cobalt y) nickel z) vanadium

Last Answer : ANSWER: W -- TITANIUM

Themit consists of a finely divided mixture of iron oxide and copper. a) True b) False

Description : Themit consists of a finely divided mixture of iron oxide and copper. a) True b) False

Last Answer : b) False

Thermite is a mixture of aluminum and: w) hematite x) sodium oxide y) iron z) magnesium

Description : Thermite is a mixture of aluminum and: w) hematite x) sodium oxide y) iron z) magnesium

Last Answer : ANSWER: W -- HEMATITE

Paints with white lead base are suitable for painting of (A) Wood work (B) Iron work (C) Both wood work and iron work (D) None of the ab

Description : Paints with white lead base are suitable for painting of (A) Wood work (B) Iron work (C) Both wood work and iron work (D) None of the above

Last Answer : Answer: Option A

Setting time of cement increases by adding (A) Gypsum (B) Hydrogen peroxide (C) Calcium chloride (D) Sodium oxide

Description : Setting time of cement increases by adding (A) Gypsum (B) Hydrogen peroxide (C) Calcium chloride (D) Sodium oxide

Last Answer : Answer: Option A

Setting time of cement increases by adding (i)gypsum (ii)sodium oxide (iii)calcium chloride [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : Setting time of cement increases by adding (i)gypsum (ii)sodium oxide (iii)calcium chloride [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ A ] i

Galvanising means covering iron with a thin coat of (A) Tin (B) Zinc (C) Glaze (D) Coal tar

Description : Galvanising means covering iron with a thin coat of (A) Tin (B) Zinc (C) Glaze (D) Coal tar

Last Answer : Answer: Option B

Distemper is (A) A paint consisting of powdered chalk, pigments and water (B) A water proofing agent (C) A paint consisting of coloured cement and water (D) A drying agent

Description : Distemper is (A) A paint consisting of powdered chalk, pigments and water (B) A water proofing agent (C) A paint consisting of coloured cement and water (D) A drying agent

Last Answer : Answer: Option A

Paint in dog coat?

Description : Paint in dog coat?

Last Answer : If it’s latex paint, regular old Dawn dish soap should do it. Soak him well, scrub it in, and try to comb as much of it out as you can (gently!) before rinsing.

Second coat of paint is done after minim. of (i) 2 Hrs after first coat (ii) 4 Hrs after first coat (i) 6 Hrs after first coat (iv) 8 Hrs. after first coat

Description : Second coat of paint is done after minim. of (i) 2 Hrs after first coat (ii) 4 Hrs after first coat (i) 6 Hrs after first coat (iv) 8 Hrs. after first coat

Last Answer : (iv) 8 Hrs. after first coat

While painting with Aluminium paint, a little quantity of ………..shall be added to the paint while doing the first coat to distinguish it from the second coat a) little blue paint* b) lamp black c) red paint d) green paint

Description : While painting with Aluminium paint, a little quantity of ………..shall be added to the paint while doing the first coat to distinguish it from the second coat a) little blue paint* b) lamp black c) red paint d) green paint

Last Answer : a) little blue paint*

Pick up the correct statement from the following: (A) The first coat of stucco plaster is called scratch coat (B) The second coat of stucco plaster is called brown coat (C) The third coat of stucco plaster is called white coat (D) All the abov

Description : Pick up the correct statement from the following: (A) The first coat of stucco plaster is called scratch coat (B) The second coat of stucco plaster is called brown coat (C) The third coat of stucco plaster is called white coat (D) All the above

Last Answer : Answer: Option D

Give scientific reasons (in not more than four lines each) for the following: (i) Meat takes longer to cook on the mountains (ii) Water remains cool in earthen pitchers (iii) Ice and salt mixture is used as a freezing agent by manual ice cream makers. (iv) It is not advisable to sleep under trees during the night. (v) Greenhouse operators paint their glass roofs white in summer.

Description : Give scientific reasons (in not more than four lines each) for the following: (i) Meat takes longer to cook on the mountains (ii) Water remains cool in earthen pitchers (iii) Ice and salt ... to sleep under trees during the night. (v) Greenhouse operators paint their glass roofs white in summer.

Last Answer : (i) Meat takes longer to cook on the mountains: The atmospheric pressure decreases as the altitude increases. The boiling point of water is 100 c at standard atmospheric pressure. At the mountains this ... of light to a maximum. And therefore white colour is painted on the roofs in the summer.

Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric acid) 7. Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Description : Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric ... Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Last Answer : 1. Copper oxide - CuO 2. Iron (III) chloride - FeCl3 3. Sodium hydroxide - NaOH 4. Iron (II) sulphide - FeS 5. Lead (II) oxide - PbO 6. Hydrogen nitrate (nitric acid) - HNO3 7. ... ) - H2SO4 8. Calcium hydroxide - Ca(OH)2 9. Magnesium carbonate - MgCO3 10.Ammonium carbonate - (NH4)2CO3

Which of the following battery is used for aircraft? A. Lead acid battery B. Nickel-iron battery C. Dry cell battery D. Silver oxide battery

Description : Which of the following battery is used for aircraft? A. Lead acid battery B. Nickel-iron battery C. Dry cell battery D. Silver oxide battery

Last Answer : B. Nickel-iron battery

What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Description : What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Last Answer : a) Titanium dioxide

Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above