Pozzolanic properties exist in (A) Shales (B) Fly ash (C) Pumicite (D) All the above

Pozzolanic properties exist in
(A) Shales
(B) Fly ash
(C) Pumicite
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

State any two properties and any two uses of fly ash

Description : State any two properties and any two uses of fly ash

Last Answer : Properties: a) It contains SiO2, Al2O3, Fe2O3, CaO and some toxic elements b) Flyash together with bottom ash is a non-hazardous material c) These particles are spherical in shape d) ... reclamation l) Used in cement production m) Production of roller compacted concrete n) Used in geopolymers

Shales are (A) Porous (B) Permeable (C) Porous and permeable (D) Porous but not permeable

Description : Shales are  (A) Porous  (B) Permeable  (C) Porous and permeable  (D) Porous but not permeable

Last Answer : (D) Porous but not permeable

To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Description : To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Last Answer : D

Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Description : Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Last Answer : (d) All the above

Workability improved by adding (A) Fly ash (B) Hydrated lime (C) Calcium chloride (D) All the above

Description : Workability improved by adding (A) Fly ash (B) Hydrated lime (C) Calcium chloride (D) All the above

Last Answer : Answer: Option D

For making fly-ash building bricks, the following mix of fly-ash, sand and lime, is (A) 80 : 13 : 7 (B) 70 : 20 : 10 (C) 60 : 35 : 5 (D) None of these

Description : For making fly-ash building bricks, the following mix of fly-ash, sand and lime, is (A) 80 : 13 : 7 (B) 70 : 20 : 10 (C) 60 : 35 : 5 (D) None of these

Last Answer : Answer: Option A

The main constituent of fly-ash, is (A) Aluminium oxide (B) Silica (C) Ferrous oxide (D) All of these

Description : The main constituent of fly-ash, is (A) Aluminium oxide (B) Silica (C) Ferrous oxide (D) All of these

Last Answer : Answer: Option D

The workability of concrete can be improved by adding (a) Hydrated lime (b) Fly ash (c) Calcium chloride (d) All the above

Description : The workability of concrete can be improved by adding (a) Hydrated lime (b) Fly ash (c) Calcium chloride (d) All the above

Last Answer : (d) All the above

Fly ash when added to concrete [ A ] Acts as aggregates [ B ] Acts as pozzolona [ C ] Improves appearance [ D ] Reduces setting time

Description : Fly ash when added to concrete [ A ] Acts as aggregates [ B ] Acts as pozzolona [ C ] Improves appearance [ D ] Reduces setting time

Last Answer : [ B ] Acts as pozzolona

Air pollution by “Fly Ash” is caused by–

Description : Air pollution by “Fly Ash” is caused by–

Last Answer : Cement industry

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on removal of hydrogen from it by cryogenic method (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification (D) Coal based fertiliser plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification

Smog is (A) Nothing but black smoke (B) A combination of smoke and fog (C) A liquid particle resulting from vapor condensation (D) A solid particle e.g. fly-ash

Description : Smog is (A) Nothing but black smoke (B) A combination of smoke and fog (C) A liquid particle resulting from vapor condensation (D) A solid particle e.g. fly-ash

Last Answer : (B) A combination of smoke and fog

State the uses of fly ash and blast furnace slag.

Description : State the uses of fly ash and blast furnace slag.

Last Answer :  I) Fly ash The various uses of fly ash are: 1) Concrete production, as a partial substitute material for Portland cement. 2) For the construction of embankments and other structural fills. 3) For ... and water proofing. 5) It is used as insulation in mineral wool, in rail road ballast etc.

Write two uses of each : (i) Fly ash (ii) Blast furnace slag

Description : Write two uses of each : (i) Fly ash (ii) Blast furnace slag

Last Answer : I) Fly ash The various uses of fly ash are: 1) Concrete production, as a partial substitute material for Portland cement. 2) For the construction of embankments and other structural fills. 3) For ... and water proofing. 5) It is used as insulation in mineral wool, in rail road ballast etc. 

What are the major constituents of typical fly ash particles generated from the combustion of coal? w) acidic and basic oxides x) trace elements y) unburned carbon z) sulfates and phosphates

Description : What are the major constituents of typical fly ash particles generated from the combustion of coal? w) acidic and basic oxides x) trace elements y) unburned carbon z) sulfates and phosphates

Last Answer : ANSWER: W -- ACIDIC AND BASIC OXIDES 

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

Washing of coal (A) Reduces its sulphur and ash content (B) Controls its ash fusibility and increases its calorific value(C) Improves its coking properties(D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its sulphur and ash content (B) Controls its ash fusibility and increases its calorific value (C) Improves its coking properties (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which among the following definitions are correct: a) Epistemology - It is a study of the kinds of knowledge that are required for solving problems in the world b) Ontology - It is the study of the kinds of things that exist. In AI, the programs and sentences deal with various kinds of objects, and we study what these kinds are and what their basic properties are. Emphasis on ontology begins in the 1990s. c) Both of Above d) None of These

Description : Which among the following definitions are correct: a) Epistemology - It is a study of the kinds of knowledge that are required for solving problems in the world b) Ontology - It is the study of the ... basic properties are. Emphasis on ontology begins in the 1990s. c) Both of Above d) None of These

Last Answer : c) Both of Above

Putty is (A) Made with finely powdered chalk and linseed oil (B) Used for fixing glass panes (C) Softened by a solution of pearl ash and quick-lime soaked in water (D) All the above

Description : Putty is (A) Made with finely powdered chalk and linseed oil (B) Used for fixing glass panes (C) Softened by a solution of pearl ash and quick-lime soaked in water (D) All the above

Last Answer : Answer: Option D

Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Description : Dumpy level is most suitable when (A) The instrument is to be shifted frequently (B) Fly levelling is being done over long distance (C) Many readings are to be taken from a single setting of the instrument (D) All of the above

Last Answer : (C) Many readings are to be taken from a single setting of the instrument

The liquid limit and plastic limit exist in (A) Sandy soils (B) Silty soils (C) Gravel soils (D) Clay soils

Description : The liquid limit and plastic limit exist in (A) Sandy soils (B) Silty soils (C) Gravel soils (D) Clay soils

Last Answer : (D) Clay soils

The critical exist gradient of seepage water in soils, is (A) Directly proportional to the voids ratio (B) Inversely proportional to the specific gravity (C) Directly proportional to the specific gravity (D) None of these

Description : The critical exist gradient of seepage water in soils, is (A) Directly proportional to the voids ratio (B) Inversely proportional to the specific gravity (C) Directly proportional to the specific gravity (D) None of these

Last Answer : (D) None of these

The critical exist gradient of seepage water in soils, increases with (A) An increase in specific gravity (B) A decrease in specific gravity (C) A decrease in void ratio (D) Both (a) and (c)

Description : The critical exist gradient of seepage water in soils, increases with (A) An increase in specific gravity (B) A decrease in specific gravity (C) A decrease in void ratio (D) Both (a) and (c)

Last Answer : Answer: Option D

In a static fluid (A) Resistance to shear stress is small (B) Fluid pressure is zero (C) Linear deformation is small (D) Only normal stresses can exist

Description : In a static fluid (A) Resistance to shear stress is small (B) Fluid pressure is zero (C) Linear deformation is small (D) Only normal stresses can exist

Last Answer : Answer: Option D

Center of buoyancy is the (A) Centroid of the displaced volume of fluid (B) Center of pressure of displaced volume (C) Does not exist (D) None of the above

Description : Center of buoyancy is the (A) Centroid of the displaced volume of fluid (B) Center of pressure of displaced volume (C) Does not exist (D) None of the above

Last Answer : Answer: Option A