For dynamic strain measurement, the Wheatstone bridge used is of __________ type. (A) Voltage sensitive null (B) Voltage sensitive deflected (C) Current sensitive deflected (D) None of these

For dynamic strain measurement, the Wheatstone bridge used is of __________ type.
(A) Voltage sensitive null
(B) Voltage sensitive deflected
(C) Current sensitive deflected
(D) None of these
by

1 Answer

Answer :

(B) Voltage sensitive deflected
by

Related questions

Which of the following bridge is frequency sensitive: a) Wheatstone bridge b) Maxwell bridge c) Anderson bridge d) Wien bridge

Description : Which of the following bridge is frequency sensitive: a) Wheatstone bridge b) Maxwell bridge c) Anderson bridge d) Wien bridge

Last Answer : Ans: C

The illustrated circuit is a wheatstone bridge. If the meter 'G' reads 0 with the switch closed then ________. EL-0024 A. the current through R1 - R2 is equal to the current through R3 - Rx B. the voltage across b - d is equal to the voltage of E C. the resistance of Rx is equal to the resistance of R2 D. all the above are true

Description : The illustrated circuit is a wheatstone bridge. If the meter 'G' reads 0 with the switch closed then ________. EL-0024 A. the current through R1 - R2 is equal to the current through R3 - Rx B. the voltage ... of E C. the resistance of Rx is equal to the resistance of R2 D. all the above are true

Last Answer : Answer: A

__________ circuit is most commonly used to measure strain with the help of a strain gauge. (A) Ballast (B) Voltage balancing potentiometric (C) Simple current sensitive (D) None of these

Description : __________ circuit is most commonly used to measure strain with the help of a strain gauge. (A) Ballast (B) Voltage balancing potentiometric (C) Simple current sensitive (D) None of these

Last Answer : Option B

How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Description : How does the supply voltage affect the accuracy of Wheatstone bridge measurements?

Last Answer : As the supply voltage increases, bridge components may heat up and become less accurate.

Show that the percentage error in the measurement of resistance by a metre bridge is minimum when the null point is near about the centre of the wire.

Description : Show that the percentage error in the measurement of resistance by a metre bridge is minimum when the null point is near about the centre of the wire.

Last Answer : Show that the percentage error in the measurement of resistance by a metre bridge is minimum when the null point is ... B. 50 cm C. 80 cm D. 100 cm

tern null as it applies to bridge measurement.

Description : tern null as it applies to bridge measurement.

Last Answer : Null measurements balance voltages so that there is no current flowing through the measuring device and, therefore, no alteration of the circuit being measured. Null measurements are generally more ... the use of standard voltmeters and ammeters, and they still have limits to their precision.

Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ionisation of gas by X-rays (C) The quality of X-rays can be controlled by varying the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Description : Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ... the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Last Answer : (C) The quality of X-rays can be controlled by varying the anode-cathode voltage

A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray can of refrigerant approved for this purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray ... purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Last Answer : Answer: B

The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Description : The illustrated circuit is a _____________. EL-0024 A. megohm meter B. Gauss meter C. wheatstone bridge D. germanium diode tester

Last Answer : Answer: C

The circuit shown in the illustration represents a/an ____________. EL-0085 A. operational amplifier B. Wheatstone bridge C. magnetic amplifier D. power supply

Description : The circuit shown in the illustration represents a/an ____________. EL-0085 A. operational amplifier B. Wheatstone bridge C. magnetic amplifier D. power supply

Last Answer : Answer: D

The Wheatstone bridge is a precision measuring instrument utilizing the principle of changes in _____________. A. inductance B. capacitance C. resistance D. amperage

Description : The Wheatstone bridge is a precision measuring instrument utilizing the principle of changes in _____________. A. inductance B. capacitance C. resistance D. amperage

Last Answer : Answer: C

What is the difference the a wheatstone bridge and a potentiometer ?

Description : What is the difference the a wheatstone bridge and a potentiometer ?

Last Answer : The difference between a potentiometer and a wheatstone bridge measuring instrument is that potentiometer is a voltage measuring instrument and wheatstone bridge is a current measuring instrument. 

A wheatstone bridge is balanced if ___

Description : A wheatstone bridge is balanced if ___

Last Answer : the ratio of resistors on one side of the bridge equals the ratio of resistors on the other side

A simplified version of the Wheatstone bridge wherein, two of the ratio arms are replaced by a 100cm long Manganin of uniform cross-sections and provided with a slider

Description : A simplified version of the Wheatstone bridge wherein, two of the ratio arms are replaced by a 100cm long Manganin of uniform cross-sections and provided with a slider

Last Answer : slide-wire bridge

Wheatstone bridge Practical

Description : Wheatstone bridge Practical

Last Answer : Practical Significance The conductors are generally made from copper & aluminum. They are having low resistance. It is essential to measure its resistance precisely to calculate the voltage drop per ... the total resistance (R) of the coil. 6. Determine per unit length resistance

Wheatstone bridge

Description : Wheatstone bridge

Last Answer : Wheatstone bridge

A Wheatstone bridge cannot be used for precision measurements because errors are introduced into on ...

Description :  A Wheatstone bridge cannot be used for precision measurements because errors are introduced into on account of: - a) Resistance of the connecting lead b) Thermoelectric EMFs c) Contact resistance d) all the above

Last Answer :  A Wheatstone bridge cannot be used for precision measurements because errors are introduced into on account of: - a) Resistance of the connecting lead b) Thermoelectric EMFs c) Contact resistance d) all the above

Mho's scale of hardness, which consists of 10 standard minerals is used for the measurement of __________ hardness. (A) Scratch (B) Indentation (C) Dynamic (D) Rebound

Description : Mho's scale of hardness, which consists of 10 standard minerals is used for the measurement of __________ hardness. (A) Scratch (B) Indentation (C) Dynamic (D) Rebound

Last Answer : (A) Scratch

On oscilloscope screen for dynamic measurement, lissajous diagram is normally used to determine the __________ of the input signal. (A) Frequency (B) Amplitude (C) Damping (D) None of these

Description : On oscilloscope screen for dynamic measurement, lissajous diagram is normally used to determine the __________ of the input signal. (A) Frequency (B) Amplitude (C) Damping (D) None of these

Last Answer : (A) Frequency

A resistance R is to be measured using a meter bridge. Student chooses the standared resistance S to be `100 Omega`. He finds the null point at `l_(1)

Description : A resistance R is to be measured using a meter bridge. Student chooses the standared resistance S to be `100 Omega`. He finds the null point at `l_(1)

Last Answer : A resistance R is to be measured using a meter bridge. Student chooses the standared resistance ... a more accurate measurement with a meter bridge

The most commonly used null deflector in a power frequency ac bridge is a:

Last Answer : The most commonly used null deflector in a power frequency ac bridge is a: Vibration galvanometer.

Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of

Description : Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of frequency in the applied voltage waveform is   (A)sinusoidal (B) square (C) rectangular (D) triangular

Last Answer : Weins bridge is used for measurement of frequency in the applied voltage waveform is measurement of frequency in the applied voltage waveform is sinusoidal 

In the Wheatstone network given, `P=10 Omega, Q=20Omega, R=15Omega, S=30Omega`, the current passing through the battery (of negligible internal resist

Description : In the Wheatstone network given, `P=10 Omega, Q=20Omega, R=15Omega, S=30Omega`, the current passing through the battery (of negligible internal resist

Last Answer : In the Wheatstone network given, `P=10 Omega, Q=20Omega, R=15Omega, S=30Omega`, the current passing through the ... zero C. `0.18 A` D. `0.72 A`

Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range until a suitable reading is obtained. C. The indicating needle is deflected from left to right regardless of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Description : Which of the following statements regarding the use of a current measuring instrument is correct? A. It must be connected in series with the circuit. B. You should always start with the lowest range ... of polarity. D. An external shunt is generally utilized where current is less than 10 amperes.

Last Answer : Answer: A

H.A. Robert’s concept of “DEFLECTED CURRENT" Signifies Options: 1) Electrocution 2) Magnetism 3) Obstacle to Cure 4) Galvanism

Description : H.A. Robert’s concept of “DEFLECTED CURRENT" Signifies Options: 1) Electrocution 2) Magnetism 3) Obstacle to Cure 4) Galvanism

Last Answer : 3) Obstacle to Cure

A woman has an upper respiratory infection. Six years ago, she experienced an episode of bronchospasm follwing penicillin V therapy. The cultures now reveal a strain of streptococcus pneumoniae that is sensitive to all of the following drugs. Which of these drugs would be the best choice for this patient? (a) Amoxicillin/clavulanate (b) Erythromycin (c) Ampicillin (d) cefaclor (e) Cyclacillin

Description : A woman has an upper respiratory infection. Six years ago, she experienced an episode of bronchospasm follwing penicillin V therapy. The cultures now reveal a strain of streptococcus pneumoniae that is ... ? (a) Amoxicillin/clavulanate (b) Erythromycin (c) Ampicillin (d) cefaclor (e) Cyclacillin

Last Answer : Ans: B

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

Particle nature of cathode rays is proved due to the fact that they (A) Travel in a straight line (B) Get deflected by magnetic electric field (C) Produce fluorescence (D) Heat the exposed material

Description : Particle nature of cathode rays is proved due to the fact that they (A) Travel in a straight line (B) Get deflected by magnetic electric field (C) Produce fluorescence (D) Heat the exposed material

Last Answer : Option B

Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Description : Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Last Answer : Diagram: Figure: DC signal conditioning circuit for pressure measurement using strain gauge Where, Rg= strain gauge resistance. Explanation: In order to measure strain with ... millivolts output per volt input. The Wheatstone circuit is also well suited for temperature compensation.

How strain gauge is used for pressure measurement, explain?

Description : How strain gauge is used for pressure measurement, explain?

Last Answer : strain gauge: - strain gauge is used for pressure measurement as one of the arm of a wheatstones' bridge, the pressure is applied to the strain gauge through diaphragm elastic pressure sensor.

This is a method of using a Wheatstone brdige to determine the distance from the test point to a fault in a telephone or telegraph line or cable.

Description : This is a method of using a Wheatstone brdige to determine the distance from the test point to a fault in a telephone or telegraph line or cable.

Last Answer : varmeter/reactive VA meter

A dummy strain gage is used in a quarter bridge strain gage circuit to :

Description : A dummy strain gage is used in a quarter bridge strain gage circuit to :  (A) compensate for changes in temperature and lead wire resistance  (B) produce more output voltage from the bridge  (C) increase the sensitivity of the bridge  (D) compensate lead wire resistance only

Last Answer : A dummy strain gage is used in a quarter bridge strain gage circuit to : compensate for changes in temperature and lead wire resistance 

In early stages of myocardial ischemia the most sensitive indicator is the measurement of the activity of (A) CPK (B) SGPT (C) SGOT (D) LDH

Description : In early stages of myocardial ischemia the most sensitive indicator is the measurement of the activity of (A) CPK (B) SGPT (C) SGOT (D) LDH

Last Answer : Answer : A

Explain Static Error and Dynamic Error in measurement systems.

Description : Explain Static Error and Dynamic Error in measurement systems.

Last Answer : Definition of static error and dynamic error  Static error: It is the difference between the true value of a quantity not changing with time and the value indicated by the instrument  Dynamic ... changing with time and the value indicated by the instrument if no static error is assumed.

How is it possible to use a current sensitive meter movement to measure voltage?

Description : How is it possible to use a current sensitive meter movement to measure voltage?

Last Answer : Since the resistance of a meter movement remains the same as the pointer is deflected, the amount of current through the movement is proportional to the voltage applied. Therefore, only the scale of the movement must be changed.

What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Description : What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Last Answer : Wein Bridge

What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Description : What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Last Answer : Wein Bridge

A shunt-fed quarter-wavelength Marconi antenna A. has maximum RF impedance to ground at its feedpoint B. has a current null at its feedpoint C. has a zero DC resistance to ground D. has zero RF resistance to ground

Description : A shunt-fed quarter-wavelength Marconi antenna A. has maximum RF impedance to ground at its feedpoint B. has a current null at its feedpoint C. has a zero DC resistance to ground D. has zero RF resistance to ground

Last Answer : C. has a zero DC resistance to ground

10. Imagine that you are sitting in a chamber with your back to one wall. An electron beam, moving horizontally from back wall towards the front wall, is deflected by a strong magnetic field to your right side. What is the direction of magnetic field? -Science

Description : 10. Imagine that you are sitting in a chamber with your back to one wall. An electron beam, moving horizontally from back wall towards the front wall, is deflected by a strong magnetic field to your right side. What is the direction of magnetic field? -Science

Last Answer : The direction of the magnetic field can be determined using the Fleming’s Left hand rule. The direction of the magnetic field will be perpendicular to the direction of current and the direction ... it can be concluded that the direction of the magnetic field inside the chamber is downward.

3. A positively-charged particle (alpha-particle) projected towards the west is deflected towards north by a magnetic field. The direction of magnetic field is -Physics-10

Description : 3. A positively-charged particle (alpha-particle) projected towards the west is deflected towards north by a magnetic field. The direction of magnetic field is -Physics-10

Last Answer : The direction of the magnetic field can be determined using the Fleming’s Left hand rule. According to the rule, if we arrange our thumb, forefinger and the middle finger of the left ... north, hence the direction of magnetic field will be upward according to Fleming’s Left hand rule.

1. Why does a compass needle get deflected when brought near a bar magnet? -Physics-10

Description : 1. Why does a compass needle get deflected when brought near a bar magnet? -Physics-10

Last Answer : The compass needle is a small magnet. When the compass needle is brought close to a bar magnet, the magnetic field lines of the compass needle interact with the magnetic field lines of bar magnet, which causes the compass needle to deflect.

Why is the Wind in the, Southern hemisphere is deflected towards left? -Do You Know?

Description : Why is the Wind in the, Southern hemisphere is deflected towards left? -Do You Know?

Last Answer : answer:

X-rays are deflected by__________.

Description : X-rays are deflected by__________.

Last Answer : X-rays are deflected by__________. A. electrical field B. magnetic field C. gravitational field D. None of these

Assertion `(A) : beta-` particles are deflected more than `alpha-` particles in a given electric field. Reason `(R) : `Charge on `alpha-` particles is

Description : Assertion `(A) : beta-` particles are deflected more than `alpha-` particles in a given electric field. Reason `(R) : `Charge on `alpha-` particles is

Last Answer : Assertion `(A) : beta-` particles are deflected more than `alpha-` particles in a given electric field. ... . If both (A) and (R ) are incorrect.

Suppose Rutherford had not seen any alpha particles deflected back from the gold foil. How would this most likely have affected scientific understanding of the structure of an atom?

Description : Suppose Rutherford had not seen any alpha particles deflected back from the gold foil. How would this most likely have affected scientific understanding of the structure of an atom?

Last Answer : It would have taken scientists longer to discover protons. A+

A testing device called a 'growler' is being used to locate a shorted coil in the stator of an AC electrical machine. When the 'feeler' is moved over a slot containing the shorted coil _____________. A. a loud growling noise will be heard B. any vibration within the feeler will cease C. the meter needle will be deflected to zero D. the meter needle will be deflected to full-scale

Description : A testing device called a 'growler' is being used to locate a shorted coil in the stator of an AC electrical machine. When the 'feeler' is moved over a slot containing the shorted coil _____________. ... . the meter needle will be deflected to zero D. the meter needle will be deflected to full-scale

Last Answer : Answer: A

What the wind is deflected due of the rotation of the earth?

Description : What the wind is deflected due of the rotation of the earth?

Last Answer : Geostropic wind

Why are In the northern hemisphere, currents deflected to their right?

Description : Why are In the northern hemisphere, currents deflected to their right?

Last Answer : Due to coriolis force

When the wind is deflected due to the rotation of the Earth, what is it called?

Description : When the wind is deflected due to the rotation of the Earth, what is it called?

Last Answer : Geostropic wind