Design of IIR filter using Bilinear transformation 2

Design of IIR filter using Bilinear transformation 2
by

1 Answer

Answer :

Design of IIR filter using Bilinear transformation 2

 image

by
edited

Related questions

What are the properties of the bilinear transformation?

Description : What Are The Properties Of The Bilinear Transformation?

Last Answer : The mapping for the bilinear transformation is a one-to-one mapping; that is for every point z, there is exactly one corresponding point s, and vice versa. The jΩ-axis maps on to the unit circle |z|=1, ... |z|=1 and the right half of the splane maps on to the exterior of the unit circle |z|=1.

What are the advantages and disadvantages of bilinear transformation?

Description : What are the advantages and disadvantages of bilinear transformation?

Last Answer : ✔ The bilinear transformation provides one-to-one mapping ✔ Stable continuous systems can be mapped into realizable, stable digital systems ✔ There is no aliasing DISADVANTAGES: ✔ The ... phase response of the analog filter is preserved in a digital filter obtained by bilinear transformation.

What are the properties of the bilinear transformation?

Description : What are the properties of the bilinear transformation?

Last Answer : ✔ The mapping for the bilinear transformation is a one-to-one mapping that is for every point z, there is exactly one corresponding point s,and vice versa ✔ The j Ω axis maps on to the unit circle z = 1,the ... z = 1 and the right half of the s-plane maps on to the exterior of the unit circle z = 1

What is bilinear transformation?

Description : What is bilinear transformation?

Last Answer : The bilinear transformation is a mapping that transforms the left half of s plane into the unit circle in the z-plane only once thus avoiding aliasing of frequency components.

Would it be possible to design a device that would filter out television and radio commercials?

Description : Would it be possible to design a device that would filter out television and radio commercials?

Last Answer : It’s been done, it was called TIVO and for a while it was awesome, until they got sued and had to remove the ad filtering.

Bag filter design is predominantly dependent on gas temperature, as it affects the gas density & viscosity and the selection of filtering material. The pressure drop in a bag filter is (A) Inversely proportional to viscosity of gas (B) Proportional to the viscosity & density of the gas (C) Proportional to the pressure of the gas (D) Both (B) and (C)

Description : Bag filter design is predominantly dependent on gas temperature, as it affects the gas density & viscosity and the selection of filtering material. The pressure drop in a bag filter is (A) Inversely proportional to ... the gas (C) Proportional to the pressure of the gas (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

(a) Define permeability. (b) Define MMF. (c) Define form factor of an alternating quantity. (d) Define frequency and time period of an alternating quality. (e) Define transformation ratio of transformer. (f) State the EMF equation of a 1 transformer and state the meaning of each term used. (g) Give two applications of single phase motors.

Description : (a) Define permeability. (b) Define MMF. (c) Define form factor of an alternating quantity. (d) Define frequency and time period of an alternating quality. (e) Define transformation ratio of transformer. ... and state the meaning of each term used. (g) Give two applications of single phase motors. 

Last Answer : Permeability : It is the ability of a magnetic/Non magnetic material to allow setting up of flux in it.  MMF : The magneto motive force (MMF) is the force required to setup flux in a magnetic / ... applications of single phase motors : Water pumps, ceiling fan, lathe machine

Wye Delta Transformation problems

Description : Wye Delta Transformation

Last Answer : Wye Delta Transformation 1 : https://youtu.be/mPKeczDWZCo Wye Delta Transformation 2 : https://youtu.be/k80VbHI-wwg Wye Delta Transformation 3 : https://youtu.be/6cnwj15uw5M Wye Delta Transformation ... 8 : https://youtu.be/knRb5UW1404 Wye Delta Transformation 9 : https://youtu.be/JBwHKBJ08WM

3kW load is supplied by an autotransformer with 0.7 transformation ratio. Conductively transferred power

Description : 3kW load is supplied by an autotransformer with 0.7 transformation ratio. Conductively transferred power from primary to secondary is (A) 2.1 kW (B) 0.9 kW (C) 4.29 kW (D) 3 kW

Last Answer : 3kW load is supplied by an autotransformer with 0.7 transformation ratio. Conductively transferred power from primary to secondary is 2.1 kW

What are the reasons for using parallel transformation?

Description : What are the reasons for using parallel transformation?

Last Answer : Need answer

A selectable marker is used to (a) help in eliminating the non-transformants, so that the transformants can be regenerated (b) identify the gene for a desired trait in an alien organism (c) select a suitable vector for transformation in a specific crop (d) mark a gene on a chromosome for isolation using restriction enzyme.

Description : A selectable marker is used to (a) help in eliminating the non-transformants, so that the transformants can be regenerated (b) identify the gene for a desired trait in an alien organism (c) ... in a specific crop (d) mark a gene on a chromosome for isolation using restriction enzyme.

Last Answer : (a) help in eliminating the non-transformants, so that the transformants can be regenerated

Transformation refers to a. Using A Virus To Transfer DNA Fragments. b. DNA Fragments Transferred Between Live Donor And Recipient Cells. c. The Formation of an F- Recombinant Cell. d. The Transfer of Naked Fragments of DNA

Description : Transformation refers to a. Using A Virus To Transfer DNA Fragments. b. DNA Fragments Transferred Between Live Donor And Recipient Cells. c. The Formation of an F- Recombinant Cell. d. The Transfer of Naked Fragments of DNA

Last Answer : b. DNA Fragments Transferred Between Live Donor And Recipient Cells.