six most common multiples

six most common multiples
by

1 Answer

Answer :

six most common multiples

image

by

Related questions

How to Get a Six Pack

Description : How to Get a Six Pack

Last Answer : How to Get a Six Pack Having a six pack is something people dream of. Imagine being able to take off your shirt on the beach to reveal a toned, firm set of abs that would make anyone jealous. Well ... with your diet first and you'll notice a big change in how much your muscles will begin to show.

Most Spoken Languages

Description : Most Spoken Languages

Last Answer : Most Spoken Languages 1. Mandarin language - China The highest number of speakers use Mandarin language the number of speakers are crossed 1 billion plus, it is the most widely spoken language on the planet ... Cameroon, Haiti and France. To say hello in French, say Bonjour (bone-joor).

How to Stop a Common Cold

Description : How to Stop a Common Cold

Last Answer : How to Stop a Common Cold The common cold hits all of us, and the worst part about having a cold is knowing that, while you can treat it, there is no miracle cure and you will probably catch a ... seven day, or if you develop a fever of more than one hundred degrees, go to the doctor immediately.

Draw full bridge & half bridge configuration with common cathode.

Description : Draw full bridge & half bridge configuration with common cathode.

Last Answer : Half Bridge Configuration: Full Bridge Configuration: 

Why common emitter configuration is commonly used?

Description : Why common emitter configuration is commonly used?

Last Answer : Common emitter configuration is commonly used for amplifications because 1. The common emitter configuration (CE) provides maximum voltage and current gain and hence provides maximum power gain. The ... automatic impedance matching maximum power transfer will take place from one stage to other.

If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be

Description :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be A) 0.98 B) 0.41 C) 59 D) 55  

Last Answer :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be 0.98 

The ac bypassing of RF by CF in a common emitter configuration :

Description : The ac bypassing of RF by CF in a common emitter configuration :  (A) increases ac signal across emitter -base junction (B) decreases ac signal across emitter -base junction (C) decreases voltage amplification (D) stabilizes the Q -point

Last Answer : The ac bypassing of RF by CF in a common emitter configuration : increases ac signal across emitter -base junction

Which is the most common type of fault?

Description : Which is the most common type of fault?

Last Answer : Single phase to ground fault is the most common type of fault.

What is the most common type of power plant?

Description : What is the most common type of power plant?

Last Answer : Hydroelectric  power  plant.

What are the first three common multiples of four and six?

Description : What are the first three common multiples of four and six?

Last Answer : They are 12, 24 and 36

What are the first six nonzero multiples of 9?

Description : What are the first six nonzero multiples of 9?

Last Answer : 9x1= 99x2= 189x3= 279x4= 369x5= 459x6= 54Is this what you mean?

the common multiples of 4 and 13, the only 2-digit number is？?

Description : the common multiples of 4 and 13, the only 2-digit number is？?

Last Answer : It's 52

What is the Common Multiples of 25 45 60?

Description : What is the Common Multiples of 25 45 60?

Last Answer : 45

what are the 3 common multiples of 3,4 and6?

Description : what are the 3 common multiples of 3,4 and6?

Last Answer : 12, 24 36

What is common denominator of two or more multiples is called a?

Description : What is common denominator of two or more multiples is called a?

Last Answer : common multiple

What are the two Common on multiples of 9 And 12?

Description : What are the two Common on multiples of 9 And 12?

Last Answer : 1 and 3

What are the first four common multiples of 2 and 4?

Description : What are the first four common multiples of 2 and 4?

Last Answer : Feel Free to Answer

What is the least common multiples of seven and eight?

Description : What is the least common multiples of seven and eight?

Last Answer : The LCM of 7 and 8 is 56

What are the first 3 common multiples of 36 and 63?

Description : What are the first 3 common multiples of 36 and 63?

Last Answer : 252, 504, 756

What are the least common multiples of 30 50 and 36?

Description : What are the least common multiples of 30 50 and 36?

Last Answer : 900

What are the common multiples of 27 6 and 8?

Description : What are the common multiples of 27 6 and 8?

Last Answer : Any multiple of 216

Define angle of repose.

Description : Define angle of repose. 

Last Answer : Angle of repose is defined as the angle made by the inclined plane with the horizontal plane at which the body placed on an inclined plane is just on the point of moving down the plane, under the action of its own weight.

Define the ideal machine and ideal effort.

Description : Define the ideal machine and ideal effort.

Last Answer : Ideal Machine is the machine whose efficiency is 100 % and in which friction is zero.  Ideal Effort is the ratio of load lifted to velocity ratio.

A single force and a couple acting in the same plane upon a rigid body?

Description : A single force and a couple acting in the same plane upon a rigid body?

Last Answer : A single force and a couple acting in the same plane upon a rigid body cannot balance each other.

The algebraic sum of moments of the forces forming couple about any point in their plane is?

Description : The algebraic sum of moments of the forces forming couple about any point in their plane is?

Last Answer : The algebraic sum of moments of the forces forming couple about any point in their plane is equal to the moment of the couple.

Kinetic friction is the?

Description : Kinetic friction is the?

Last Answer : Kinetic friction is the friction force acting when the body is in motion.

Tangent of angle of friction is equal to?

Description : Tangent of angle of friction is equal to?

Last Answer : Tangent of angle of friction is equal to coefficient of friction.

Dynamic friction as compared to static friction is?

Description : Dynamic friction as compared to static friction is?

Last Answer : Dynamic  friction  is   less  compared  to  static  friction.

Coulomb friction is the friction between?

Description : Coulomb friction is the friction between?

Last Answer : Coulomb friction is the friction between bodies having relative motion.

Limiting force of friction is the?

Description : Limiting force of friction is the?

Last Answer : Limiting force of friction is the friction force acting when the body is just about to move.

Coefficient of friction is the?

Description : Coefficient of friction is the?

Last Answer : Coefficient of friction is the ratio of limiting friction and normal reaction.

Frictional force encountered after commencement of motion is called?

Description : Frictional force encountered after commencement of motion is called?

Last Answer : Frictional force encountered after commencement of motion is called dynamic friction.

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Last Answer : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be zero at its upper end.

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Last Answer : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be upwards at its upper end.

The ratio of limiting friction and normal reaction is known as?

Description : The ratio of limiting friction and normal reaction is known as?

Last Answer : The ratio of limiting friction and normal reaction is known as coefficient of friction.

The coefficient of friction depends on?

Description : The coefficient of friction depends on?

Last Answer : The coefficient of friction depends on nature of surface.

Angle of friction is the?

Description : Angle of friction is the?

Last Answer : Angle of friction is the angle between normal reaction and the resultant of normal reaction and the limiting friction.

If a suspended body is struck at the center of percussion, then the pressure on...

Description : If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be?

Last Answer : If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be zero.

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart...

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span?

Last Answer : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span 4.0 cm.

The possible loading in various members of framed structures are?

Description : The possible loading in various members of framed structures are?

Last Answer : The possible loading in various members of framed structures are compression or tension.

The units of moment of inertia of mass are?

Description : The units of moment of inertia of mass are?

Last Answer : Moment of inertia mass*velocity [Kg M T'-1]

The center of gravity of a triangle lies at the point of?

Description : The center of gravity of a triangle lies at the point of?

Last Answer : The center of gravity of a triangle lies at the point of concurrence of the medians.

The center of percussion of the homogeneous rod of length L suspended at the top will be?

Description : The center of percussion of the homogeneous rod of length L suspended at the top will be?

Last Answer : The center of percussion of the homogeneous rod of length L suspended at the top will be 2L/3.

Center of gravity of a thin hollow cone lies on the axis at a height of?

Description : Center of gravity of a thin hollow cone lies on the axis at a height of?

Last Answer : Center of gravity of a thin hollow cone lies on the axis at a height of one-third of the total height above base.

Center of percussion is?

Description : Center of percussion is?

Last Answer : Center of percussion is the point of application of the resultant of all the forces tending to cause a body to rotate about a certain axis.

Center of gravity of a solid cone lies on the axis at the height?

Description : Center of gravity of a solid cone lies on the axis at the height?

Last Answer : Center of gravity of a solid cone lies on the axis at the height one-fourth of the total height above base.

The center of gravity of a uniform lamina lies at?

Description : The center of gravity of a uniform lamina lies at?

Last Answer : The center of gravity of a uniform lamina lies at the mid point of its axis.

The product of either force of couple with the arm of the couple is called?

Description : The product of either force of couple with the arm of the couple is called?

Last Answer : The product of either force of couple with the arm of the couple is called moment of the couple.

Two coplanar couples having equal and opposite moments?

Description : Two coplanar couples having equal and opposite moments

Last Answer : Two coplanar couples having equal and opposite moments can not balance each other.

According to Lami's theorem?

Last Answer : According to Lami's theorem if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two.