Define the ideal machine and ideal effort.

Define the ideal machine and ideal effort.
by

1 Answer

Answer :

Ideal Machine is the machine whose efficiency is 100 % and in which friction is zero. 

Ideal Effort is the ratio of load lifted to velocity ratio.
by

Related questions

Define angle of repose.

Description : Define angle of repose. 

Last Answer : Angle of repose is defined as the angle made by the inclined plane with the horizontal plane at which the body placed on an inclined plane is just on the point of moving down the plane, under the action of its own weight.

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

Define (i) Draw Bar Pull (ii) Tractive Effort

Description : Define (i) Draw Bar Pull (ii) Tractive Effort 

Last Answer : (i) Draw Bar Pull: If the extra load attached to the vehicle is pulled by fully utilizing the excess power, then, maximum drawbar pull = Tractive effort Road resistance.  (ii) Tractive effort ... rear wheel tyres and the road. Therefore, the useful tractive effort is always less than the traction.

six most common multiples

Description : six most common multiples

Last Answer : six most common multiples

A single force and a couple acting in the same plane upon a rigid body?

Description : A single force and a couple acting in the same plane upon a rigid body?

Last Answer : A single force and a couple acting in the same plane upon a rigid body cannot balance each other.

The algebraic sum of moments of the forces forming couple about any point in their plane is?

Description : The algebraic sum of moments of the forces forming couple about any point in their plane is?

Last Answer : The algebraic sum of moments of the forces forming couple about any point in their plane is equal to the moment of the couple.

Kinetic friction is the?

Description : Kinetic friction is the?

Last Answer : Kinetic friction is the friction force acting when the body is in motion.

Tangent of angle of friction is equal to?

Description : Tangent of angle of friction is equal to?

Last Answer : Tangent of angle of friction is equal to coefficient of friction.

Dynamic friction as compared to static friction is?

Description : Dynamic friction as compared to static friction is?

Last Answer : Dynamic  friction  is   less  compared  to  static  friction.

Coulomb friction is the friction between?

Description : Coulomb friction is the friction between?

Last Answer : Coulomb friction is the friction between bodies having relative motion.

Limiting force of friction is the?

Description : Limiting force of friction is the?

Last Answer : Limiting force of friction is the friction force acting when the body is just about to move.

Coefficient of friction is the?

Description : Coefficient of friction is the?

Last Answer : Coefficient of friction is the ratio of limiting friction and normal reaction.

Frictional force encountered after commencement of motion is called?

Description : Frictional force encountered after commencement of motion is called?

Last Answer : Frictional force encountered after commencement of motion is called dynamic friction.

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Last Answer : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be zero at its upper end.

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Last Answer : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be upwards at its upper end.

The ratio of limiting friction and normal reaction is known as?

Description : The ratio of limiting friction and normal reaction is known as?

Last Answer : The ratio of limiting friction and normal reaction is known as coefficient of friction.

The coefficient of friction depends on?

Description : The coefficient of friction depends on?

Last Answer : The coefficient of friction depends on nature of surface.

Angle of friction is the?

Description : Angle of friction is the?

Last Answer : Angle of friction is the angle between normal reaction and the resultant of normal reaction and the limiting friction.

If a suspended body is struck at the center of percussion, then the pressure on...

Description : If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be?

Last Answer : If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be zero.

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart...

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span?

Last Answer : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span 4.0 cm.

The possible loading in various members of framed structures are?

Description : The possible loading in various members of framed structures are?

Last Answer : The possible loading in various members of framed structures are compression or tension.

The units of moment of inertia of mass are?

Description : The units of moment of inertia of mass are?

Last Answer : Moment of inertia mass*velocity [Kg M T'-1]

The center of gravity of a triangle lies at the point of?

Description : The center of gravity of a triangle lies at the point of?

Last Answer : The center of gravity of a triangle lies at the point of concurrence of the medians.

The center of percussion of the homogeneous rod of length L suspended at the top will be?

Description : The center of percussion of the homogeneous rod of length L suspended at the top will be?

Last Answer : The center of percussion of the homogeneous rod of length L suspended at the top will be 2L/3.

Center of gravity of a thin hollow cone lies on the axis at a height of?

Description : Center of gravity of a thin hollow cone lies on the axis at a height of?

Last Answer : Center of gravity of a thin hollow cone lies on the axis at a height of one-third of the total height above base.

Center of percussion is?

Description : Center of percussion is?

Last Answer : Center of percussion is the point of application of the resultant of all the forces tending to cause a body to rotate about a certain axis.

Center of gravity of a solid cone lies on the axis at the height?

Description : Center of gravity of a solid cone lies on the axis at the height?

Last Answer : Center of gravity of a solid cone lies on the axis at the height one-fourth of the total height above base.

The center of gravity of a uniform lamina lies at?

Description : The center of gravity of a uniform lamina lies at?

Last Answer : The center of gravity of a uniform lamina lies at the mid point of its axis.

The product of either force of couple with the arm of the couple is called?

Description : The product of either force of couple with the arm of the couple is called?

Last Answer : The product of either force of couple with the arm of the couple is called moment of the couple.

Two coplanar couples having equal and opposite moments?

Description : Two coplanar couples having equal and opposite moments

Last Answer : Two coplanar couples having equal and opposite moments can not balance each other.

According to Lami's theorem?

Last Answer : According to Lami's theorem if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two.

A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if?

Description : A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if?

Last Answer : A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if the floor and wall both are smooth surfaces.

D' Alembert's principle is used for?

Description : D' Alembert's principle is used for?

Last Answer : D' Alembert's principle is used for reducing the problem of kinetics to equivalent statics problem.

If a rigid body is in equilibrium under the action of three forces, then?

Description : If a rigid body is in equilibrium under the action of three forces, then?

Last Answer : If a rigid body is in equilibrium under the action of three forces, then the lines of action of these forces meet in a point, the lines of action of these forces are parallel.

According to principle of moments?

Description : According to principle of moments?

Last Answer : According  to  principle  of  moments  clockwise  moments  equals   anticlockwise  moments.

Two non-collinear parallel equal forces acting in opposite direction?

Description : Two non-collinear parallel equal forces acting in opposite direction?

Last Answer : Two non-collinear parallel equal forces acting in opposite direction constitute a couple.

A number of forces acting at a point will be in equilibrium if?

Description : A number of forces acting at a point will be in equilibrium if?

Last Answer : The sum of the resolved parts in any two perpendicular directions are both zero

According to principle of transmissibility of forces, the effect of a force upon a body is?

Description : According to principle of transmissibility of forces, the effect of a force upon a body is?

Last Answer : According to principle of transmissibility of forces, the effect of a force upon a body is the same at every point in its line of action.

The forces, which meet at one point, but their lines of action do not lie in a plane, are called?

Description : The forces, which meet at one point, but their lines of action do not lie in a plane, are called?

Last Answer : The forces, which meet at one point, but their lines of action do not lie in a plane, are called non-coplanar concurrent forces.

The weight of a body is due to?

Description : The weight of a body is due to

Last Answer : The weight of a body is due to gravitational force of attraction towards the center of the earth.

The resolved part of the resultant of two forces inclined at an angle 9 in a given direction is equal to?

Description : The resolved part of the resultant of two forces inclined at an angle 9 in a given direction is equal to

Last Answer : The resolved part of the resultant of two forces inclined at an angle 9 in a given direction is equal to the algebraic sum of the resolved parts of the forces in the given direction.

The algebraic sum of the resolved parts of a number of forces in a given direction is equal...

Description : The algebraic sum of the resolved parts of a number of forces in a given direction is equal to the resolved part of their resultant in the same direction. This is as per the principle of

Last Answer : The algebraic sum of the resolved parts of a number of forces in a given direction is equal to the resolved part of their resultant in the same direction. This is as per the principle of resolution of forces.

If two equal forces of magnitude P act at an angle 9°, their resultant will be?

Description : If two equal forces of magnitude P act at an angle 9°, their resultant will be

Last Answer : If two equal forces of magnitude P act at an angle 9°, their resultant will be IP cos 9/2.

A force is completely defined when we specify?

Description : A force is completely defined when we specify?

Last Answer : A force is completely defined when we specify magnitude, direction, point of application.

If a number of forces act simultaneously on a particle, it is possible?

Description : If a number of forces act simultaneously on a particle, it is possible?

Last Answer : If a number of forces act simultaneously on a particle, it is possible to replace them by a single force.

A force acting on a body may?

Description : A force acting on a body may?

Last Answer : A force acting on a body may introduce internal stresses, balance the other forces acting on it, retard its motion, change its motion.

Forces are called coplanar when all of them acting on body lie in?

Last Answer : Forces are called coplanar when all of them acting on body lie in one plane.

Forces are called concurrent when their lines of action meet in?

Description : Forces are called concurrent when their lines of action meet in?

Last Answer : Forces are called concurrent when their lines of action meet in one point.

The unit of power in S.I. units is

Description : The unit of power in S.I. units is

Last Answer : The unit of power in S.I. units is watt.