. In addresses for _______ networks, the first 16 bits specify a particular network, and the last
16 bits specify a particular host.
A. class A
B. class C
C. class B
D. class D

1 Answer

Answer :

C. class B

Related questions

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Last Answer : 65,536

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be A) 216 B) 65,536 C) 64K D) Any of the above

Last Answer : Answer : B

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Last Answer : b. 65,536

Description : Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii only c. Both A and B d. None of the above

Last Answer : a. i only

Description : address use 7 bits for the and 24 bits for the portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Last Answer : a. address.

Description : The number of addresses in a class A block is _______. A) 65,534 B) 16,777,216 C) 256 D) none of the above

Last Answer : 16,777,216

Description : The number of addresses in a class B block is _______. A) 65,536 B) 16,777,216 C) 256 D) none of the above

Last Answer : 65,536

Description : The number of addresses in a class C block is _______. A) 65,534 B) 16,777,216 C) 256 D) none of the above

Last Answer : 256

Description : The Internet addresses are ______ bits in length in IPV4 addressing scheme A. 16 B. 64 C. 32 D. 48

Last Answer : C. 32

Description : The Internet addresses are ……….. bits in length in IPV4 addressing scheme a. 16 b. 64 c. 48 d. 32

Last Answer : d. 32

Description : You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252

Last Answer : 255.255.252.0

Description : In _______forwarding, the mask anddestination addresses are both 0.0.0.0 in therouting table. A) next-hop B) network-specific C) host-specific D) default

Last Answer : default

Description : Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) ... or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Last Answer : B. 1,3

Description : In the original ARPANET,_______ were directly connected together. A) IMPs B) host computers C) networks D) routers

Last Answer : IMPs

Description : In IPv4, class _______ has the greatestnumber of addresses in eachblock. A) A B) B C) C D) D

Last Answer : A

Description : The VPIof an NNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Last Answer : 12

Description : The VPIof a UNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Last Answer : 8

Description : The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Last Answer : A. Data Link

Description : Which form of byte assigning strategy is adopted in class B type of network corresponding to IP addresses? a. Network.Node.Node.Node b. Network.Network.Node.Node c. Network.Network.Network.Node d. Network.Node.Node.Node

Last Answer : b. Network.Network.Node.Node

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or all hosts. ii) The class A network 128.0.0.0 is defined as the loopback network. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

Description : The local host and the remote host are defined using IP addresses. To define the processes, we need second identifiers called ____________ A. UDP addresses B. transport addresses C. port addresses D. none of the above

Last Answer : C. port addresses

Description : .................. address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

Description : 2.address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

Description : In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Last Answer : A. Transmission Lines and Switching Elements.

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

Description : You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. ... B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Last Answer : 255.254.0.0

Description : In the network 200.10.11.144/27, the fourth octet (in decimal) of the last IP address of the network which can be assigned to a host is ________ a. 158 b. 255 c. 222 d. 223

Last Answer : a. 158

Description : ________ is the assignment of a network identity to a specific MAC address that allows systems to be found on networks. a) Internet Hardware Addresses b) Ethernet Software Addresses c) Ethernet Hardware Addresses d) None of the mentioned

Last Answer : Ethernet Hardware Addresses

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

Description : The logicaladdresses in theInternetarecalled _______ addresses. A) port B) IP C) Email D) noneof the above

Last Answer : IP

Description : IPv6 has _______ -bit addresses. A. 32 B. 64 C. 128 D. Variable

Last Answer : C. 128

Description : An organization isgranteda block of classless addresses with the starting address 199.34.32.0/27. How many addresses are granted? A) 8 B) 16 C) 32 D) none of the above

Last Answer : 16

Description : An organization isgranteda block of classless addresses with the starting address 199.34.76.128/29. How manyaddressesare granted? A) 8 B) 16 C) 32 D) none of the above

Last Answer : 8

Description : An organization isgranteda block of classless addresses with the starting address 199.34.76.64/28. How manyaddresses are granted? A) 8 B) 16 C) 32 D) none of the above

Last Answer : 16

Description : What is the lastaddress of a blockof classless addresses ifone of the addresses is 12.2.2.127/28? A) 12.2.2.16 B) 12.2.2.112 C) 12.2.2.127 D) none of the above

Last Answer : 12.2.2.127

Description : Which address could be the beginningaddress of ablock of32 classless addresses? A) 2.4.6.5 B) 2.4.6.16 C) 2.4.6.64 D) none of the above

Last Answer : 2.4.6.64

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Last Answer : b. ARP (Address Resolution Protocol)

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Last Answer : B. ARP Address Resolution Protocol

Description : In networks thatdo not support physical multicastaddressing, multicastingcan be accomplished through _______. A) mapping B) queries C) tunneling D) noneof the above

Last Answer : tunneling

Description : The Aloha protocol is an OSI _______ protocol for LAN networks with broadcast topology A. layer 1 B. layer 4 C. layer 2 D. layer 3

Last Answer : C. layer 2

Description : An IPv4 address consistsof _______ bits. A) 4 B) 8 C) 32 D) 64

Last Answer : 32

Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Last Answer : b. CRC

Description : The physical layer is concerned with the movement of _______ over the physical medium. A. programs B. dialogs C. protocols D. Bits

Last Answer : D. Bits

Description : State the following statement is true or false. I. In class B addresses a total of more than 1 billion addresses can be formed. II. Class E addresses are reserved for future or experimental use. a. True, False b. True, True c. False, True d. False, False

Last Answer : b. True, True

Description : addresses are reserved for multicasting. a. Class B b. Class C c. Class D d. Class E

Last Answer : c. Class D

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 1