Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or all hosts. ii) The class A network 128.0.0.0 is defined as the loopback network. A) i only B) ii only C) Both A and B D) None of the above

Which of the following statement is true?
i) An address with all bits 1 is interpreted as all networks or all hosts.
ii) The class A network 128.0.0.0 is defined as the loopback network.
A) i only
B) ii only
C) Both A and B
D) None of the above
by

1 Answer

Answer :

A) i only
by

Related questions

Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii onlyc. Both A and B d. None of the above

Description : Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii only c. Both A and B d. None of the above

Last Answer : a. i only

Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

Loopback address ....................... of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Description : Loopback address ....................... of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Last Answer : A) (: : 1)

Loopback address ……………………. of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Description : Loopback address ……………………. of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Last Answer : A) (: : 1)

In a classful addressing, the IP addresses with 0 (zero) as network number: (A) refers to the current network (B) refers to broadcast on the local network (C) refers to broadcast on a distant network (D) refers to loopback testing

Description : In a classful addressing, the IP addresses with 0 (zero) as network number: (A) refers to the current network (B) refers to broadcast on the local network (C) refers to broadcast on a distant network (D) refers to loopback testing

Last Answer : (A) refers to the current network

.................. address use 7 bits for the <network> and 24 bits for the <host> portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Description : .................. address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Description : State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Last Answer : D) False, False

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

When you ping theloopback address,a packet is sent where? A. On the network B. Down through thelayers of the IP architecture and then up thelayers again C. Across the wire D. through the loopback dongle E. None of the above

Description : When you ping theloopback address,a packet is sent where? A. On the network B. Down through thelayers of the IP architecture and then up thelayers again C. Across the wire D. through the loopback dongle E. None of the above

Last Answer : Down through thelayers of the IP architecture and then up thelayers again

In a classful addressing, first four bits in Class A IP address is (A) 1010 (B) 1100 (C) 1011 (D) 1110

Description : In a classful addressing, first four bits in Class A IP address is (A) 1010 (B) 1100 (C) 1011 (D) 1110

Last Answer : Answer: A,B,C,D

Which IP Address Class is INCORRECTLY paired with its range of network numbers? * Class A addresses include 192.0.0.0 through 223.255.255.0 * Class A addresses include 1.0.0.0 through 126.0.0.0 * Class B addresses include 128.0.0.0 through 191.255.0.0 * Class C addresses include 192.0.0.0 through 223.255.255.0 * Class D addresses include 224.0.0.0 through 239.255.255.0

Description : Which IP Address Class is INCORRECTLY paired with its range of network numbers? * Class A addresses include 192.0.0.0 through 223.255.255.0 * Class A addresses include 1.0.0.0 through 126.0.0.0 * Class B ... 192.0.0.0 through 223.255.255.0 * Class D addresses include 224.0.0.0 through 239.255.255.0

Last Answer : 1

A network on the Internet has a subnet mask of 255.255.240.0. What is the maximum number of hosts it can handle ? (A) 1024 (B) 2048 (C) 4096 (D) 8192

Description : A network on the Internet has a subnet mask of 255.255.240.0. What is the maximum number of hosts it can handle ? (A) 1024 (B) 2048 (C) 4096 (D) 8192

Last Answer : (C) 4096

IPv4 and IPv6 are addresses used to identify computers on the internet. Find the correct statement out of the following: (A) Number of bits required for IPv4 address is more than number of bits required for IPv6 address. (B) Number of bits required for IPv4 address is same as number of bits required for IPv6 address. (C) Number of bits required for IPv4 address is less than number of bits required for IPv6 address. (D) Number of bits required for IPv4 address is 64.

Description : IPv4 and IPv6 are addresses used to identify computers on the internet. Find the correct statement out of the following: (A) Number of bits required for IPv4 address is more than number of bits required for ... of bits required for IPv6 address. (D) Number of bits required for IPv4 address is 64. 

Last Answer : (C) Number of bits required for IPv4 address is less than number of bits required for IPv6 address.

. In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Description : . In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Last Answer : C. class B

In the early stages of development of the internet protocol, network administrators interpreted an IP address in ____parts: a) Network Number Portion b) Host Number Portions c) Both of Above d) None of These

Description : In the early stages of development of the internet protocol, network administrators interpreted an IP address in ____parts: a) Network Number Portion b) Host Number Portions c) Both of Above d) None of These

Last Answer : c) Both of Above

In the early stages of development of the internet protocol, network administrators interpreted an IP address in ____parts: a) Network Number Portion b) Host Number Portions c) Both of Above d) None of These

Description : In the early stages of development of the internet protocol, network administrators interpreted an IP address in ____parts: a) Network Number Portion b) Host Number Portions c) Both of Above d) None of These

Last Answer : c) Both of Above

An IPv6 address is _________ bits long A. 32 B. 64 C. 128 D. none of the above

Description : An IPv6 address is _________ bits long A. 32 B. 64 C. 128 D. none of the above

Last Answer : C. 128

Due to the growth of the internet and the predicted depletion of available addresses, a new version of IP version 6 using _____for the address was developed in 1995: a) 128 Bits b) 129 Bits c) 130 Bits d) None of These

Description : Due to the growth of the internet and the predicted depletion of available addresses, a new version of IP version 6 using _____for the address was developed in 1995: a) 128 Bits b) 129 Bits c) 130 Bits d) None of These

Last Answer : a) 128 Bits

Due to the growth of the internet and the predicted depletion of available addresses, a new version of IP version 6 using _____for the address was developed in 1995: a) 128 Bits b) 129 Bits c) 130 Bits d) None of These

Description : Due to the growth of the internet and the predicted depletion of available addresses, a new version of IP version 6 using _____for the address was developed in 1995: a) 128 Bits b) 129 Bits c) 130 Bits d) None of These

Last Answer : a) 128 Bits

What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits

Description : What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits

Last Answer : C. 128 bits 

Which one of the following is true for Java? A) Java is object oriented and interpreted B) Java is efficient and faster than C C) Java is the choice of everyone. D) Java is not robust.

Description : Which one of the following is true for Java? A) Java is object oriented and interpreted B) Java is efficient and faster than C C) Java is the choice of everyone. D) Java is not robust.

Last Answer : A) Java is object oriented and interpreted

In TCP/IP Reference model, the job of ............... layer is to permit hosts to inject packets into any network and travel them independently to the destination. (A) Physical (B) Transport (C) Application (D) Host-to-network

Description : In TCP/IP Reference model, the job of ............... layer is to permit hosts to inject packets into any network and travel them independently to the destination. (A) Physical (B) Transport (C) Application (D) Host-to-network

Last Answer : Answer: Marks to all

State true or false for Java Program. i) Data members of an interface are by default final ii) An abstract class has implementations of all methods defined inside it. A) i-false, ii-false B) i-false, ii-true C) i-true, ii-false D) i-true, ii-true

Description : State true or false for Java Program. i) Data members of an interface are by default final ii) An abstract class has implementations of all methods defined inside it. A) i-false, ii-false B) i-false, ii-true C) i-true, ii-false D) i-true, ii-true

Last Answer : C) i-true, ii-false

Which address is the loopback address? A. 0.0.0.1 B. 127.0.0.0 C. 127.0.0.1 D. 255.255.255.255 E. None of the above

Description : Which address is the loopback address? A. 0.0.0.1 B. 127.0.0.0 C. 127.0.0.1 D. 255.255.255.255 E. None of the above

Last Answer : 255.255.255.255

What is the loopback address of localhost? A. 0.0.0.0 B. 127.0.0.1 C. 172.16.12.1 D. 255.0.0.0

Description : What is the loopback address of localhost? A. 0.0.0.0 B. 127.0.0.1 C. 172.16.12.1 D. 255.0.0.0

Last Answer : C. 172.16.12.1

Which of the following statement(s) with regard to an abstract class in JAVA is/are TRUE? I. An abstract class is one that is not used to create objects. II. An abstract class is designed only to act as a base class to be inherited by other classes. (1) Only l (2) Only II (3) Neither I nor II (4) Both l and II

Description : Which of the following statement(s) with regard to an abstract class in JAVA is/are TRUE? I. An abstract class is one that is not used to create objects. II. An abstract class is designed only to act as a base class ... by other classes. (1) Only l (2) Only II (3) Neither I nor II (4) Both l and II

Last Answer : Both l and II

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks ... only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

Which of the following neural networks uses supervised learning? (A) Multilayer perceptron (B) Self organizing feature map (C) Hopfield network (1) (A) only (2) (B) only (3) (A) and (B) only (4) (A) and (C) only

Description : Which of the following neural networks uses supervised learning? (A) Multilayer perceptron (B) Self organizing feature map (C) Hopfield network (1) (A) only (2) (B) only (3) (A) and (B) only (4) (A) and (C) only

Last Answer : (1) (A) only

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps

Last Answer : (A) 2 Mbps Explanation: In data transmission, throughput is the amount of data moved successfully from one place to another in a given period of time, and typically measured in bits per second (bps), ... second (Mbps) or gigabits per second (Gbps). Here, Throughput = 15000 x 8000/60 = 2 Mbps 

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps

Last Answer : (B) 2 Mbps

The virtual address generated by a CPU is 32 bits. The Translation Lookaside Buffer (TLB) can hold total 64 page table entries and a 4-way set associative (i.e. with 4- cache lines in the set). The page size is 4 KB. The minimum size of TLB tag is (A) 12 bits (B) 15 bits (C) 16 bits (D) 20 bits

Description : The virtual address generated by a CPU is 32 bits. The Translation Lookaside Buffer (TLB) can hold total 64 page table entries and a 4-way set associative (i.e. with 4- cache lines in the set). The page size is 4 KB. The minimum size of TLB tag is (A) 12 bits (B) 15 bits (C) 16 bits (D) 20 bits

Last Answer : (C) 16 bits Explanation: VirtualAddress = 32 bits PageSize = 4KB = 12 bits therefore : VPNTag = 20 bits, OffsetTag = 12 bits TLBEntryLength = VPNTag = 20 bits TotalTLBEntries = 64, 4-way implies ... therefore : TLBIndex = 4 bits TLBTag = TLBEntryLength - TLBIndex = 20 - 4 = 16 bits

A memory management system has 64 pages with 512 bytes page size. Physical memory consists of 32 page frames. Number of bits required in logical and physical address are respectively: (1) 14 and 15 (2) 14 and 29 (3) 15 and 14 (4) 16 and 32

Description : A memory management system has 64 pages with 512 bytes page size. Physical memory consists of 32 page frames. Number of bits required in logical and physical address are respectively: (1) 14 and 15 (2) 14 and 29 (3) 15 and 14 (4) 16 and 32

Last Answer : (3) 15 and 14

hosts per subnet. What subnet mask will you use? * 255.255.255.248 * 255.255.255.128 * 255.255.255.192 * 255.255.255.240

Description : hosts per subnet. What subnet mask will you use? * 255.255.255.248 * 255.255.255.128 * 255.255.255.192 * 255.255.255.240

Last Answer : Correct answer: A By borrowing 5 bits from the last octet, you can. have 30 subnets. If you borrowed only 4 bits you could only have 14 subnets. The formula is (2 to the power of n)-2. By borrowing ... To get 20 subnets, you would need to borrow 5 bits so the subnet mask would be 255.255.255.248

Which of the following condition is true for an object used as a function argument. i) A copy of the entire objects is passed to the function. ii) Only the address of the object is transferred to the function. A) Only i B) Only ii C) Both i and ii D) None of them

Description : Which of the following condition is true for an object used as a function argument. i) A copy of the entire objects is passed to the function. ii) Only the address of the object is transferred to the function. A) Only i B) Only ii C) Both i and ii D) None of them

Last Answer : C) Both i and ii

State true of false. i) Public can only be assigned to class ii) Protected protects a statement iii) Protected method is never accessible outside the package iv) Friendly variable may be accessible outside class A) i-true, ii-true, iii-false, iv-true B) i-true, ii-false, iii-true, iv-false C) i-false, ii-true, iii-false, iv-false D) i-true, ii-false, iii-false, iv-true

Description : State true of false. i) Public can only be assigned to class ii) Protected protects a statement iii) Protected method is never accessible outside the package iv) Friendly variable may be accessible outside class A) i- ... -false, ii-true, iii-false, iv-false D) i-true, ii-false, iii-false, iv-true

Last Answer : C) i-false, ii-true, iii-false, iv-false

You are given the following address: 153.50.6.27/25. Determine the subnet mask, address class, subnet address, and broadcast address. * 255.255.255.128, B,153.50.6.0, 153.50.6.127 * 255.255.255.128, C,153.50.6.0, 153.50.6.127 * 255.255.255.128, C,153.50.6.127, 153.50.6.0 * 255.255.255.224, C,153.50.6.0, 153.50.6.127

Description : You are given the following address: 153.50.6.27/25. Determine the subnet mask, address class, subnet address, and broadcast address. * 255.255.255.128, B,153.50.6.0, 153.50.6.127 * 255.255.255.128, C,153.50.6.0, 153 ... .128, C,153.50.6.127, 153.50.6.0 * 255.255.255.224, C,153.50.6.0, 153.50.6.127

Last Answer : Correct answer: A 255.255.255.224,

address use 7 bits for the <network> and 24 bits for the <host> portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Description : address use 7 bits for the and 24 bits for the portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Last Answer : a. address.

2.address use 7 bits for the <network> and 24 bits for the <host> portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Description : 2.address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

Internet is ................. A) Network of Networks B) Networks of Communication C) Networks of Data D) Group of LAN

Description : Internet is ................. A) Network of Networks B) Networks of Communication C) Networks of Data D) Group of LAN

Last Answer : A) Network of Networks

Consider the following statements : (a) Boolean expressions and logic networks correspond to labelled acyclic digraphs. (b) Optimal Boolean expressions may not correspond to simplest networks. (c) Choosing essential blocks first in a Karnaugh map and then greedily choosing the largest remaining blocks to cover may not give an optimal expression. Which of these statement(s) is/ are correct? (A) (a) only (B) (b) only (C) (a) and (b) (D) (a), (b) and (c)

Description : Consider the following statements : (a) Boolean expressions and logic networks correspond to labelled acyclic digraphs. (b) Optimal Boolean expressions may not correspond to simplest networks. (c) Choosing essential blocks first in a Karnaugh map ... (b) only (C) (a) and (b) (D) (a), (b) and (c)

Last Answer : (D) (a), (b) and (c) 

Four bits are used for packed sequence numbering in a sliding window protocol used in a computer network. What is the maximum window size ? (A) 4 (B) 8 (C) 15 (D) 16

Description : Four bits are used for packed sequence numbering in a sliding window protocol used in a computer network. What is the maximum window size ?  (A) 4 (B) 8 (C) 15 (D) 16

Last Answer : (C) 15 

Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) A mechanism for the allocation of temporary or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Description : Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) ... or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Last Answer : B. 1,3

Find the false statement: (A) In Modern Cryptography, symmetric key algorithms use same key both for Encryption and Decryption. (B) The Symmetric cipher DES (Data Encryption Standard) was widely used in the industry for security product. (C) The AES (Advanced Encryption Standard) cryptosystem allows variable key lengths of size 56 bits and 124 bits. (D) Public key algorithms use two different keys for Encryption and Decryption.

Description : Find the false statement: (A) In Modern Cryptography, symmetric key algorithms use same key both for Encryption and Decryption. (B) The Symmetric cipher DES (Data Encryption Standard) was widely used ... and 124 bits. (D) Public key algorithms use two different keys for Encryption and Decryption.

Last Answer : (C) The AES (Advanced Encryption Standard) cryptosystem allows variable key lengths of size 56 bits and 124 bits.

State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Description : State true or false. i) Socks are a standard for circuit level gateways. ii) The NAT is used for small number of the hosts in a private network. A) True, False B) False, True C) True, True D) False, False

Last Answer : C) True, True

Which of the following characteristics of constructor are true. i) They should be declared in the public section. ii) They are invoked automatically when the objects are created. iii) They do not have return type and void also. iv) We cannot refer their address. v) Constructors cannot virtual. A) Only i, ii, iii and v B) Only ii, iii, iv, and v C) Only i, iii, iv and v D) All i, ii, iii, iv and v

Description : Which of the following characteristics of constructor are true. i) They should be declared in the public section. ii) They are invoked automatically when the objects are created. iii) They do not have return type and void also. ... and v C) Only i, iii, iv and v D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

DES works by using a. permutation and substitution on 64 bit blocks of plain text b. only permutations on blocks of 128 bits c. exclusive ORing key bits with 64 bit blocks d. 4 rounds of substitution on 64 bit blocks with 56 bit keys

Description : DES works by using a. permutation and substitution on 64 bit blocks of plain text b. only permutations on blocks of 128 bits c. exclusive ORing key bits with 64 bit blocks d. 4 rounds of substitution on 64 bit blocks with 56 bit keys

Last Answer : a. permutation and substitution on 64 bit blocks of plain text 

The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Description : The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Last Answer : c. 62 subnets and 1022 hosts.

Which IP Address Class can have 16 million subnets but support 254 hosts? * Class C * Class A * Class B * Class D

Description : Which IP Address Class can have 16 million subnets but support 254 hosts? * Class C * Class A * Class B * Class D

Last Answer : Correct answer: A Possible Subnets IP Address Class Possible Hosts