Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii onlyc. Both A and B d. None of the above

Which of the following statement is
true?
I. An address with all bits 1 is
interpreted as all networks or all hosts.
II. The class A network 128.0.0.0 is
defined as the loopback network.
a. i only
b. ii only
c. Both A and B
d. None of the above
by

1 Answer

Answer :

a. i only
by

Related questions

Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or all hosts. ii) The class A network 128.0.0.0 is defined as the loopback network. A) i only B) ii only C) Both A and B D) None of the above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or all hosts. ii) The class A network 128.0.0.0 is defined as the loopback network. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

When you ping theloopback address,a packet is sent where? A. On the network B. Down through thelayers of the IP architecture and then up thelayers again C. Across the wire D. through the loopback dongle E. None of the above

Description : When you ping theloopback address,a packet is sent where? A. On the network B. Down through thelayers of the IP architecture and then up thelayers again C. Across the wire D. through the loopback dongle E. None of the above

Last Answer : Down through thelayers of the IP architecture and then up thelayers again

. In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Description : . In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Last Answer : C. class B

An IPv6 address is _________ bits long A. 32 B. 64 C. 128 D. none of the above

Description : An IPv6 address is _________ bits long A. 32 B. 64 C. 128 D. none of the above

Last Answer : C. 128

Which address is the loopback address? A. 0.0.0.1 B. 127.0.0.0 C. 127.0.0.1 D. 255.255.255.255 E. None of the above

Description : Which address is the loopback address? A. 0.0.0.1 B. 127.0.0.0 C. 127.0.0.1 D. 255.255.255.255 E. None of the above

Last Answer : 255.255.255.255

What is the loopback address of localhost? A. 0.0.0.0 B. 127.0.0.1 C. 172.16.12.1 D. 255.0.0.0

Description : What is the loopback address of localhost? A. 0.0.0.0 B. 127.0.0.1 C. 172.16.12.1 D. 255.0.0.0

Last Answer : C. 172.16.12.1

The network layer contains which hardware device? a. Routers, Bridges b. Bridges onlyc. Bridges and switches d. Routers, Bridges and Switches

Description : The network layer contains which hardware device? a. Routers, Bridges b. Bridges only c. Bridges and switches d. Routers, Bridges and Switches

Last Answer : d. Routers, Bridges and Switches

address use 7 bits for the <network> and 24 bits for the <host> portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Description : address use 7 bits for the and 24 bits for the portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Last Answer : a. address.

Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) A mechanism for the allocation of temporary or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Description : Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) ... or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Last Answer : B. 1,3

The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Description : The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Last Answer : c. 62 subnets and 1022 hosts.

How many hostsare attached to eachof the local area networks at your site? A. 128 B. 254 C. 256 D. 64 E. None of the above

Description : How many hostsare attached to eachof the local area networks at your site? A. 128 B. 254 C. 256 D. 64 E. None of the above

Last Answer : 254

An IPv6address is _________ bits long. A) 32B) 64 C) 128 D) none of the above

Description : An IPv6address is _________ bits long. A) 32 B) 64 C) 128 D) none of the above

Last Answer : 128

The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Description : The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Last Answer : A. Data Link

Which IP Address Class is INCORRECTLY paired with its range of network numbers? * Class A addresses include 192.0.0.0 through 223.255.255.0 * Class A addresses include 1.0.0.0 through 126.0.0.0 * Class B addresses include 128.0.0.0 through 191.255.0.0 * Class C addresses include 192.0.0.0 through 223.255.255.0 * Class D addresses include 224.0.0.0 through 239.255.255.0

Description : Which IP Address Class is INCORRECTLY paired with its range of network numbers? * Class A addresses include 192.0.0.0 through 223.255.255.0 * Class A addresses include 1.0.0.0 through 126.0.0.0 * Class B ... 192.0.0.0 through 223.255.255.0 * Class D addresses include 224.0.0.0 through 239.255.255.0

Last Answer : 1

Which of the following is correct IPv4 address? a. 124.201.3.1.52 b. 01.200.128.123 c. 300.142.210.64d. 128.64.0.0

Description : Which of the following is correct IPv4 address? a. 124.201.3.1.52 b. 01.200.128.123 c. 300.142.210.64 d. 128.64.0.0

Last Answer : d. 128.64.0.0

……………………………. extends …………………………. to provide the full set of configuration parameters defined in the Requirements for Internet Hosts RFC. A. DHCP, BOOTP B. BOOTP, DHCP C. RARP, BOOTP D. DHCP, RARP

Description : ……………………………. extends …………………………. to provide the full set of configuration parameters defined in the Requirements for Internet Hosts RFC. A. DHCP, BOOTP B. BOOTP, DHCP C. RARP, BOOTP D. DHCP, RARP

Last Answer : A. DHCP, BOOTP

You are working with a network thathas the network ID 192.168.10.0. What subnet should you use that supportsup to 25 hosts and a maximum number of subnets? A. 255.255.255.192 B. 255.255.255.224 C. 255.255.255.240 D. 255.255.255.248 E. 255.255.255.252

Description : You are working with a network thathas the network ID 192.168.10.0. What subnet should you use that supportsup to 25 hosts and a maximum number of subnets? A. 255.255.255.192 B. 255.255.255.224 C. 255.255.255.240 D. 255.255.255.248 E. 255.255.255.252

Last Answer : 255.255.255.224

In the early stages of development of the internet protocol, network administrators interpreted an IP address in ____parts: a) Network Number Portion b) Host Number Portions c) Both of Above d) None of These

Description : In the early stages of development of the internet protocol, network administrators interpreted an IP address in ____parts: a) Network Number Portion b) Host Number Portions c) Both of Above d) None of These

Last Answer : c) Both of Above

In the early stages of development of the internet protocol, network administrators interpreted an IP address in ____parts: a) Network Number Portion b) Host Number Portions c) Both of Above d) None of These

Description : In the early stages of development of the internet protocol, network administrators interpreted an IP address in ____parts: a) Network Number Portion b) Host Number Portions c) Both of Above d) None of These

Last Answer : c) Both of Above

Due to the growth of the internet and the predicted depletion of available addresses, a new version of IP version 6 using _____for the address was developed in 1995: a) 128 Bits b) 129 Bits c) 130 Bits d) None of These

Description : Due to the growth of the internet and the predicted depletion of available addresses, a new version of IP version 6 using _____for the address was developed in 1995: a) 128 Bits b) 129 Bits c) 130 Bits d) None of These

Last Answer : a) 128 Bits

Due to the growth of the internet and the predicted depletion of available addresses, a new version of IP version 6 using _____for the address was developed in 1995: a) 128 Bits b) 129 Bits c) 130 Bits d) None of These

Description : Due to the growth of the internet and the predicted depletion of available addresses, a new version of IP version 6 using _____for the address was developed in 1995: a) 128 Bits b) 129 Bits c) 130 Bits d) None of These

Last Answer : a) 128 Bits

What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits

Description : What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits

Last Answer : C. 128 bits 

With anIP address set starting with 150, you currently havesix offices that you are treating as subnets. Plans are in place toopen 10 more officesbefore the end of theyear. What subnet mask should you useto satisfy the needed numberof subnets and maximize thenumberof hosts available at eachsite? A. 192 B. 224 C. 240 D. 248 E. 252

Description : With anIP address set starting with 150, you currently havesix offices that you are treating as subnets. Plans are in place toopen 10 more officesbefore the end of theyear. What subnet mask should you useto ... maximize thenumberof hosts available at eachsite? A. 192 B. 224 C. 240 D. 248 E. 252

Last Answer : 248

With anIP address of 100, you currently have 80 subnets. What subnet mask should you use to maximize the number of available hosts? A. 192 B. 224 C. 240 D. 248 E. 252

Description : With anIP address of 100, you currently have 80 subnets. What subnet mask should you use to maximize the number of available hosts? A. 192 B. 224 C. 240 D. 248 E. 252

Last Answer : 252

In hexadecimal colon notation, a 128-bit address isdivided into _______ sections, each _____hexadecimal digits in length. A) 8: 2 B) 8: 3 C) 8: 4 D) none of the above

Description : In hexadecimal colon notation, a 128-bit address isdivided into _______ sections, each _____hexadecimal digits in length. A) 8: 2 B) 8: 3 C) 8: 4 D) none of the above

Last Answer : 8: 4

An organization isgranteda block of classless addresses with the starting address 199.34.76.128/29. How manyaddressesare granted? A) 8 B) 16 C) 32 D) none of the above

Description : An organization isgranteda block of classless addresses with the starting address 199.34.76.128/29. How manyaddressesare granted? A) 8 B) 16 C) 32 D) none of the above

Last Answer : 8

What is the size of an IP address? A. 64 bit B. 128 bit C. 16 bit D. 32 bit

Description : What is the size of an IP address? A. 64 bit B. 128 bit C. 16 bit D. 32 bit

Last Answer : D. 32 bit

Loopback address ....................... of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Description : Loopback address ....................... of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Last Answer : A) (: : 1)

Loopback address ……………………. of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Description : Loopback address ……………………. of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Last Answer : A) (: : 1)

A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Description : A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

A packet filtering firewall can a. deny certain users from accessing a service b. block worms and viruses from entering the network c. disallow some files from being accessed through FTP d. block some hosts from accessing the network

Description : A packet filtering firewall can a. deny certain users from accessing a service b. block worms and viruses from entering the network c. disallow some files from being accessed through FTP d. block some hosts from accessing the network

Last Answer : d. block some hosts from accessing the network

The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP

Description : The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP

Last Answer : D. BOOTP

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

Consider the following statements and identify the right ones. i. Higher level of capital-output ratio indicates efficient use of capital. ii. It reflects the productivity of capital in the economy a. I only b. ii onlyc. bothd. none

Description : Consider the following statements and identify the right ones. i. Higher level of capital-output ratio indicates efficient use of capital. ii. It reflects the productivity of capital in the economy a. I only b. ii only c. both d. none

Last Answer : d. none View Answer /

In a classful addressing, the IP addresses with 0 (zero) as network number: (A) refers to the current network (B) refers to broadcast on the local network (C) refers to broadcast on a distant network (D) refers to loopback testing

Description : In a classful addressing, the IP addresses with 0 (zero) as network number: (A) refers to the current network (B) refers to broadcast on the local network (C) refers to broadcast on a distant network (D) refers to loopback testing

Last Answer : (A) refers to the current network

You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. 255.240.0.0 B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Description : You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. ... B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Last Answer : 255.254.0.0

hosts per subnet. What subnet mask will you use? * 255.255.255.248 * 255.255.255.128 * 255.255.255.192 * 255.255.255.240

Description : hosts per subnet. What subnet mask will you use? * 255.255.255.248 * 255.255.255.128 * 255.255.255.192 * 255.255.255.240

Last Answer : Correct answer: A By borrowing 5 bits from the last octet, you can. have 30 subnets. If you borrowed only 4 bits you could only have 14 subnets. The formula is (2 to the power of n)-2. By borrowing ... To get 20 subnets, you would need to borrow 5 bits so the subnet mask would be 255.255.255.248

You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252

Description : You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and192.168.7.0. What subnet mask can you use to combine these addresses intoone? A. 255.255.252.0 B. 225.255.254.0 C. 255.255.255.240 D. 255.255.255.252

Last Answer : 255.255.252.0

You are given the following address: 153.50.6.27/25. Determine the subnet mask, address class, subnet address, and broadcast address. * 255.255.255.128, B,153.50.6.0, 153.50.6.127 * 255.255.255.128, C,153.50.6.0, 153.50.6.127 * 255.255.255.128, C,153.50.6.127, 153.50.6.0 * 255.255.255.224, C,153.50.6.0, 153.50.6.127

Description : You are given the following address: 153.50.6.27/25. Determine the subnet mask, address class, subnet address, and broadcast address. * 255.255.255.128, B,153.50.6.0, 153.50.6.127 * 255.255.255.128, C,153.50.6.0, 153 ... .128, C,153.50.6.127, 153.50.6.0 * 255.255.255.224, C,153.50.6.0, 153.50.6.127

Last Answer : Correct answer: A 255.255.255.224,

.................. address use 7 bits for the <network> and 24 bits for the <host> portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Description : .................. address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

2.address use 7 bits for the <network> and 24 bits for the <host> portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Description : 2.address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Last Answer : b. 2 Mbps

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Last Answer : a. 2 Mbps

What is IP class and number of sub- networks if the subnet mask is 255.224.0.0? a. Class A, 3 b. Class A, 8 c. Class B, 3 d. Class B, 32

Description : What is IP class and number of sub- networks if the subnet mask is 255.224.0.0? a. Class A, 3 b. Class A, 8 c. Class B, 3 d. Class B, 32

Last Answer : b. Class A, 8

_____defines how a particular pattern to be interpreted,and whataction is tobe taken based on that interpretation. A) Semantics B) Syntax C) Timing D) None of the abov

Description : _____defines how a particular pattern to be interpreted,and whataction is tobe taken based on that interpretation. A) Semantics B) Syntax C) Timing D) None of the abov

Last Answer : Semantics

In the MIME header field____describes how the object within the body is to be interpreted. a. content-type b. content-transfer-encoding c. content-description d. content-id

Description : In the MIME header field____describes how the object within the body is to be interpreted. a. content-type b. content-transfer-encoding c. content-description d. content-id

Last Answer : a. content-type

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Last Answer : 65,536

In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast