Description : The benefit of Maxwell equation is that a) Any parameter can be calculated b) Antenna can be designed c) Polarisation of the wave can be calculated d) Transmission line constants can be found
Last Answer : a) Any parameter can be calculated
Description : In dielectric medium, the Maxwell second equation becomes a) Curl(H) = Jd b) Curl(H) = Jc c) Curl(E) = Jd d) Curl(E) = Jd
Last Answer : a) Curl(H) = Jd
Description : The Maxwell second equation that is valid in any conductor is a) Curl(H) = Jc b) Curl(E) = Jc c) Curl(E) = Jd d) Curl(H) = Jd
Last Answer : a) Curl(H) = Jc
Description : Find the Maxwell equation derived from Faraday’s law. a) Div(H) = J b) Div(D) = I c) Curl(E) = -dB/dt d) Curl(B) = -dH/dt
Last Answer : c) Curl(E) = -dB/dt
Description : The Laplacian operator cannot be used in which one the following? a) Two dimensional heat equation b) Two dimensional wave equation c) Poisson equation d) Maxwell equation
Last Answer : d) Maxwell equation
Description : Find the Maxwell law derived from Ampere law. a) Div(I) = H b) Div(H) = J c) Curl(H) = J d) Curl(B) = D
Last Answer : c) Curl(H) = J
Description : The Gauss law employs which theorem for the calculation of charge density? a) Green theorem b) Stokes theorem c) Gauss theorem d) Maxwell equation
Last Answer : c) Gauss theorem
Description : Maxwell second equation is based on which law? a) Ampere law b) Faraday law c) Lenz law d) Coulomb law
Last Answer : a) Ampere law
Description : When the Maxwell equation is expressed in frequency domain, then which substitution is possible? a) d/dt = w/j b) d/dt = j/w c) d/dt = jw
Last Answer : c) d/dt = jw
Description : Suppose the potential function is a step function. The equation that gets satisfied is a) Laplace equation b) Poisson equation c) Maxwell equation d) Ampere equation
Last Answer : a) Laplace equation
Description : In free space, the Poisson equation becomes a) Maxwell equation b) Ampere equation c) Laplace equation d) Steady state equation
Last Answer : c) Laplace equation
Description : The continuity equation is a combination of which of the two laws? a) Ohm’s law and Gauss law b) Ampere law and Gauss law c) Ohm’s law and Ampere law d) Maxwell law and Ampere law
Last Answer : b) Ampere law and Gauss law
Description : Which of the following Maxwell equations use curl operation? a) Maxwell 1st and 2nd equation b) Maxwell 3rd and 4th equation c) All the four equations d) None of the equations
Last Answer : a) Maxwell 1st and 2nd equation
Description : Which of the following theorem use the curl operation? a) Green’s theorem b) Gauss Divergence theorem c) Stoke’s theorem d) Maxwell equation
Last Answer : b) Gauss Divergence theorem
Description : The gradient can be replaced by which of the following? a) Maxwell equation b) Volume integral c) Differential equatio
Last Answer : c) Differential equation
Description : he work done of vectors force F and distance d, separated by angle θ can be calculated using, a) Cross product b) Dot product c) Addition of two vectors d) Cannot be calculated
Last Answer : b) Dot product
Description : The Poynting vector is the power component that is calculated by the a) Product of E and H b) Ratio of E and H c) Dot product of E and H d) Cross product of E and H
Last Answer : d) Cross product of E and H
Description : If the electric potential is given, which of the following cannot be calculated? a) Electrostatic energy b) Electric field intensity c) Electric flux density d) Permittivity
Last Answer : a) Electrostatic energy
Description : Find the Maxwell first law value for the electric field intensity is given by A sin wt az a) 0 b) 1 c) -1 d) A
Last Answer : a) 0
Description : The first Maxwell law is based on which law? a) Ampere law b) Faraday law c) Lenz law d) Faraday and Lenz law
Last Answer : b) Faraday law
Description : The Ampere law is based on which theorem? a) Green’s theorem b) Gauss divergence theorem c) Stoke’s theorem d) Maxwell theorem
Last Answer : c) Stoke’s theorem
Description : Coulomb law is employed in a) Electrostatics b) Magnetostatics c) Electromagnetics d) Maxwell theory
Last Answer : a) Electrostatics
Description : Using volume integral, which quantity can be calculated? a) area of cube b) area of cuboid c) volume of cube d) distance of vector
Last Answer : c) volume of cube
Description : Which equation will hold good for a magnetic material? a) Line integral of H is zero b) Surface integral of H is zero c) Line integral of B is zero d) Surface integral of B is zero
Last Answer : d) Surface integral of B is zero
Description : Which equation will be true, if the medium is considered to be air? a) Curl(H) = 0 b) Div(H) = 0 c) Grad(H) = 0 d) Div(H) = 1
Last Answer : b) Div(H) = 0
Description : In metals which of the following equation will hold good? a) Curl(H) = J b) Curl(J) = dD/dt c) Curl(H) = D d) Curl(J) = dB/dt
Last Answer : a) Curl(H) = J
Description : In the conversion of line integral of H into surface integral, which theorem is used? a) Green theorem b) Gauss theorem c) Stokes theore d) It cannot be converted
Last Answer : c) Stokes theorem
Description : The correct sequence to find H, when D is given is a) D-E-B-H b) D-B-E-H c) It cannot be computed from the data given d) D-H
Last Answer : a) D-E-B-H
Description : It cannot be determined from Gauss law, whereas the remaining options can be computed from Gauss law. 10. Gauss law for magnetic fields is given by a) Div(E) = 0 b) Div(B) = 0 c) Div(H) = 0 d) Div(D) = 0
Last Answer : b) Div(B) = 0
Description : The Poisson equation cannot be determined from Laplace equation. State True/False. a) True b) False
Last Answer : b) False
Description : The skin depth is calculated from the amplitude of the wave. State true/false a) True b) False
Last Answer : a) True
Description : By method of images, the problem can be easily calculated by replacing the boundary with which polygon? a) Rectangle b) Trapezoid c) Square d) Triangle
Last Answer : d) Triangle
Description : Identify the advantage of using method of images. a) Easy approach b) Boundaries are replaced by charges c) Boundaries are replaced by images d) Calculation using Poisson and Laplace equation
Last Answer : a) Easy approach
Description : The magnetic flux density is directly proportional to the magnetic field intensity. State True/False. a) True b) False
Description : The work done in the power transmission with E and H given by 50 and 65 respectively. The velocity of propagation is 20m/s. a) 162.5 b) 621.5 c) 562.1 d) 261.5
Last Answer : a) 162.5
Description : Find the power of a wave given that the RMS value of E and H are 6 and 4.5 respectively. a) 24 b) 27 c) 29 d) 32
Last Answer : b) 27
Description : The power in a wave given that H component is 0.82 units in air. a) 126.74 b) 621.47 c) 216.47 d) 745.62
Last Answer : a) 126.74
Description : Find the power of an EM wave, given that the cross product of the E and H component is 2 + 3j. a) 2 b) 1 c) 4 d) 8
Last Answer : b) 1
Description : In conductors, the E and H vary by a phase difference of a) 0 b) 30 c) 45 d) 60
Last Answer : c) 45
Description : For dielectrics, which two components will be in phase? a) E and wave direction b) H and wave direction c) Wave direction and E x H d) E and H
Last Answer : d) E and H
Description : In lossy dielectric, the phase difference between the electric field E and the magnetic field H is a) 90 b) 60 c) 45 d) 0
Last Answer : d) 0
Description : Which components exist in an electromagnetic wave? a) Only E b) Only H c) Both E and H d) Neither E or H
Last Answer : c) Both E and H
Description : The surface integral of which parameter is zero? a) E b) D c) B d) H
Last Answer : c) B
Description : The line integral of which parameter is zero for static fields? a) E b) H c) D d) B
Last Answer : a) E
Description : Which of the following relations is correct? a) MMF = ∫ B.dl b) MMF = ∫ H.dl c) EMF = ∫ E.dl d) EMF = ∫ D.dl
Last Answer : c) EMF = ∫ E.dl
Description : The sequence for finding H from E is a) E-B-H b) E-V-H c) E-D-H d) E-A-H
Last Answer : a) E-B-H
Description : Find the sequence to find B when E is given. a) E-D-H-B b) B-E-D c) H-B-E-D d) V-E-B
Last Answer : a) E-D-H-B
Description : The sequence for finding E when charge density is given is a) E-D-ρv b) E-B-ρv c) E-H-ρv d) E-V-ρv
Last Answer : a) E-D-ρv
Description : To find D from B, sequence followed will be a) B-E-D b) B-H-D c) E-H-D d) E-B-D
Last Answer : a) B-E-D
Description : The magnetic energy of a magnetic material is given by a) BH/2 b) B/2H c) H/2B d) B/H
Last Answer : a) BH/2