Description : The skin depth of the wave having a frequency of 3MHz and a velocity of 12 m/s is a) 2 b) 3 c) 4 d) 6
Last Answer : c) 4
Description : Calculate the skin depth of a conductor, having a conductivity of 200 units. The wave frequency is 10 GHz in air. a) 355.8 b) 3.558 c) 35.58 d) 0.3558
Last Answer : a) 355.8
Description : The skin depth of a wave with phase constant of 12 units inside a conductor is a) 12 b) 1/12 c) 24 d) 1/24
Last Answer : b) 1/12
Description : Calculate the phase constant of a wave with skin depth of 2.5 units. a) 5/2 b) 5 c) 2 d) 2/5
Last Answer : d) 2/5
Description : The benefit of Maxwell equation is that a) Any parameter can be calculated b) Antenna can be designed c) Polarisation of the wave can be calculated d) Transmission line constants can be found
Last Answer : a) Any parameter can be calculated
Description : An elliptically polarised wave transmitted at the Brewster angle will be received as an elliptically polarised wave. State True/False a) True b) False
Last Answer : b) False
Description : A circularly polarised wave transmitted at the Brewster angle will be received as linearly polarised wave. State True/False a) True b) False
Last Answer : a) True
Description : The electric and magnetic field components in the electromagnetic wave propagation are in phase. State True/False. a) True b) False
Description : The relation between the skin depth and frequency is given by a) Skin depth α f b) Skin depth α 1/f c) Skin depth α √f d) Skin depth α 1/√f
Last Answer : d) Skin depth α 1/√f
Description : The skin depth is used to find which parameter? a) DC resistance b) AC resistance c) Permittivity d) Potential
Last Answer : b) AC resistance
Description : The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm
Last Answer : a) 4.16 kilo ohm
Description : The attenuation constant is 0.5 units. The skin depth will be a) 0.5 b) 0.25 c) 2 d) 4
Last Answer : c) 2
Description : The skin depth is measured in a) Meter b) Millimetre c) Centimetre d) Micrometer
Last Answer : d) Micrometer
Description : The skin depth of a conductor with attenuation constant of 7 neper/m is a) 14 b) 49 c) 7 d) 1/7
Last Answer : d) 1/7
Description : In conductors, which two parameters are same? a) Wavelength and phase constant b) Phase and attenuation constant c) Attenuation constant and skin depth d) Skin depth and wavelength
Last Answer : b) Phase and attenuation constant
Description : Skin depth phenomenon is found in which materials? a) Insulators b) Dielectrics c) Conductors d) Semiconductors
Last Answer : c) Conductors
Description : Calculate the skin depth of a material with attenuation constant of 2 units. a) 2 b) 1 c) 0.5 d) 4
Last Answer : c) 0.5
Description : Rectangular waveguides dominate the circular waveguides. Find the reason. a) Low cut-off frequency b) Easy to design c) More wave propagation d) The statement is false
Last Answer : b) Easy to design
Description : The Poynting vector is the power component that is calculated by the a) Product of E and H b) Ratio of E and H c) Dot product of E and H d) Cross product of E and H
Last Answer : d) Cross product of E and H
Description : Using Maxwell equation which of the following cannot be calculated directly? a) B b) D c) A d) H
Last Answer : c) A
Description : By method of images, the problem can be easily calculated by replacing the boundary with which polygon? a) Rectangle b) Trapezoid c) Square d) Triangle
Last Answer : d) Triangle
Description : If the electric potential is given, which of the following cannot be calculated? a) Electrostatic energy b) Electric field intensity c) Electric flux density d) Permittivity
Last Answer : a) Electrostatic energy
Description : Using volume integral, which quantity can be calculated? a) area of cube b) area of cuboid c) volume of cube d) distance of vector
Last Answer : c) volume of cube
Description : he work done of vectors force F and distance d, separated by angle θ can be calculated using, a) Cross product b) Dot product c) Addition of two vectors d) Cannot be calculated
Last Answer : b) Dot product
Description : A 1000W carrier is amplitude modulated to a depth of 85%. Calculate the total power of the modulated wave? A. 1361.25 W B. 680.62 W C. 1425 W D. 712.5 W
Last Answer : A. 1361.25 W
Description : A 400 W carrier is amplitude modulated to a depth of 75%.Calculate the total power in AM wave. (i) Explain the types of noise in a communication system. (ii) Compare simplex and duplex mode of communication.
Last Answer : (i) Noise: Noise is any spurious or undesired disturbances that mask the received signal in a communication system. a) Atmospheric Noise: Atmospheric Noise is also known as static noise which is the ... remote control ExamplesWalkytalky,telephone,mobile,Radar, FAX,Pager 4
Description : In P polarisation, the electric field lies in the same plane as the interface. State True/False. a) True b) False
Description : In S polarisation, the electric field lies in the plane perpendicular to that of the interface. State True/False a) True b) False
Description : The Snell law is applicable for perpendicular polarisation and the Brewster law is applicable for parallel polarisation. State True/False. a) True b) False
Description : The angle of incidence is equal to the angle of reflection for perfect reflection. State True/False. a) True b) False
Description : The critical angle is defined as the angle of incidence at which the total internal reflection starts to occur. State True/False. a) True b) False
Description : The core refractive index should be lesser than the cladding refractive index for a coaxial cable. State True/False a) True b) False
Description : The refractive index of air is unity. State True/False. a) True b) False
Description : The attenuation in a good dielectric will be non- zero. State True/False. a) True b) False
Description : In free space, the ratio of frequency to the velocity of light gives the phase constant. State True/False. a) True b) False
Description : Harmonic electromagnetic fields refer to fields varying sinusoidally with respect to time. State True/False. a) True b) False
Description : The inductance is proportional to the ratio of flux to current. State True/False. a) True b) False
Description : In air, the tangential component of flux density is continuous at the boundary. State True/False. a) True b) False
Description : The tangential component of the magnetic field intensity is continuous at the boundary of separation of two media. State True/False. a) True b) False
Description : In ferromagnetic materials the susceptibility is infinity. State True/False a) True b) False
Description : The magnetic force impacts the energy of the field. State True/false. a) True b) False
Description : Electromagnetic waves are longitudinal in nature. State True/False. a) True b) False
Description : Inductance is present in semiconductor. State True/False. a) True b) False
Description : The permeability and permittivity of air or free space is unity. State true/false. a) True b) False
Description : The energy of a coil depends on the turns. State True/False. a) True b) False
Description : The magnetic flux density is directly proportional to the magnetic field intensity. State True/False. a) True b) False
Description : Electric field will be maximum outside the conductor and magnetic field will be maximum inside the conductor. State True/False. a) True b) False
Description : The time varying electric field E is conservative. State True/False. a) True b) False
Description : The induced voltage will oppose the flux producing it. State True/False. a) True b) False
Description : The magnetic field intensity will be zero inside a conductor. State true/false. a) True b) False