Which of the following vibrations are classified according to magnitude of actuating force? a. Torsional vibrations b. Deterministic vibrationsc. Transverse d. All of the above

Which of the following vibrations are classified according to magnitude of actuating
force?
a. Torsional
vibrations
b. Deterministic
vibrationsc. Transverse
d. All of the above
by

1 Answer

Answer :

b. Deterministic
by

Related questions

Centrifugal absorber is used to reduce A) Centrifugal force in rotating system B) Torsional vibration of rotating system C) Vibration in linear system D) Transverse vibrations

Description : Centrifugal absorber is used to reduce A) Centrifugal force in rotating system B) Torsional vibration of rotating system C) Vibration in linear system D) Transverse vibrations

Last Answer : B) Torsional vibration of rotating system

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in A Transverse vibrations B Torsional vibrations C Longitudinal vibrations D None of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in A Transverse vibrations B Torsional vibrations C Longitudinal vibrations D None of the mentioned

Last Answer : A Transverse vibrations

Which of the following is a type of free vibration? A Longitudinal vibrations B Transverse vibrations C Torsional vibrations D A, B and C

Description : Which of the following is a type of free vibration? A Longitudinal vibrations B Transverse vibrations C Torsional vibrations D A, B and C

Last Answer : D A, B and C

When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A Longitudinal vibrations B Transverse vibrations C Torsional vibrations D None of these

Description : When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A Longitudinal vibrations B Transverse vibrations C Torsional vibrations D None of these

Last Answer : C Torsional vibrations

The vibrations perpendicular to the shaft axis are known as A Transverse B Longitudinal C Torsional D None of the mentioned

Description : The vibrations perpendicular to the shaft axis are known as A Transverse B Longitudinal C Torsional D None of the mentioned

Last Answer : A Transverse

When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A. longitudinal vibrations B. transverse vibrations C. torsional vibrations D. none of these

Description : When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A. longitudinal vibrations B. transverse vibrations C. torsional vibrations D. none of these

Last Answer : C. torsional vibrations

Which of the following is a type of free vibration? A. Longitudinal vibrations B. Transverse vibrations C. Torsional vibrations D. A, B and C

Description : Which of the following is a type of free vibration? A. Longitudinal vibrations B. Transverse vibrations C. Torsional vibrations D. A, B and C

Last Answer : D. A, B and C

During transverse vibrations, shaft is subjected to which type of stresses? A) Tensile stresses B) Torsional shear stress C) Bending stresses D) All of the above

Description : During transverse vibrations, shaft is subjected to which type of stresses? A) Tensile stresses B) Torsional shear stress C) Bending stresses D) All of the above

Last Answer : C) Bending stresses

Which type of vibrations are also known as transient vibrations? A) Undamped vibrations B) Damped vibrations C) Torsional vibrations D) Transverse vibrations

Description : Which type of vibrations are also known as transient vibrations? A) Undamped vibrations B) Damped vibrations C) Torsional vibrations D) Transverse vibrations

Last Answer : B) Damped vibrations

Which of the following is a type of free vibration? ( A ) Longitudinal vibrations ( C ) Torsional vibrations D ( B ) Transverse vibrations ( D ) A, B and C

Description : Which of the following is a type of free vibration? ( A ) Longitudinal vibrations ( C ) Torsional vibrations D ( B ) Transverse vibrations ( D ) A, B and C

Last Answer : ( D ) A, B and C

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Last Answer : a) transverse vibrations

During transverse vibrations, shaft is subjected to which type of stresses? a. Tensile stresses b. Torsional shear stress c. Bending stresses d. All of the above

Description : During transverse vibrations, shaft is subjected to which type of stresses? a. Tensile stresses b. Torsional shear stress c. Bending stresses d. All of the above

Last Answer : c. Bending stresses

Which type of vibrations are also known as transient vibrations? a. Undamped b. Damped c. Torsional d. Transverse vibrations

Description : Which type of vibrations are also known as transient vibrations? a. Undamped b. Damped c. Torsional d. Transverse vibrations

Last Answer : b. Damped

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Last Answer : a) transverse vibrations

In coulomb damping the frequency of damped vibrations is A Equal to that of undamped vibrations B Less than that of undamped vibrationsC More than that of undamped vibrations D Independent of the frequency of undamped vibration

Description : In coulomb damping the frequency of damped vibrations is A Equal to that of undamped vibrations B Less than that of undamped vibrationsC More than that of undamped vibrations D Independent of the frequency of undamped vibration

Last Answer : A Equal to that of undamped vibrations

What are deterministic vibrations? * (A)Vibrations caused due to known exciting force (B)Vibrations caused due to unknown exciting force (c) Vibrations which are aperiodic in nature (D) None of the above

Description : What are deterministic vibrations? * (A)Vibrations caused due to known exciting force (B)Vibrations caused due to unknown exciting force (c) Vibrations which are aperiodic in nature (D) None of the above

Last Answer : (A)Vibrations caused due to known exciting force

Deterministic vibrations are A Vibrations caused due to unknown exciting force B Vibrations caused due to known exciting force C Vibrations which are aperiodic in nature D None of the mentioned

Description : Deterministic vibrations are A Vibrations caused due to unknown exciting force B Vibrations caused due to known exciting force C Vibrations which are aperiodic in nature D None of the mentioned

Last Answer : B Vibrations caused due to known exciting force

What are deterministic vibrations? a. Vibrations caused due to known exciting force b. Vibrations caused due to unknown exciting force c. Vibrations which are aperiodic in nature d. None of the above

Description : What are deterministic vibrations? a. Vibrations caused due to known exciting force b. Vibrations caused due to unknown exciting force c. Vibrations which are aperiodic in nature d. None of the above

Last Answer : a. Vibrations caused due to known exciting force

What are deterministic vibrations? a. Vibrations caused b. Vibrations caused c. Vibrations which d. None of the above

Description : What are deterministic vibrations? a. Vibrations caused b. Vibrations caused c. Vibrations which d. None of the above

Last Answer : a. Vibrations caused

During vibrations any machine has unbalanced force of 392N and if it transmitted force of magnitude 58.3N then transmissibility value is A 0.481 B 0.822 C 0.148 D 0.296

Description : During vibrations any machine has unbalanced force of 392N and if it transmitted force of magnitude 58.3N then transmissibility value is A 0.481 B 0.822 C 0.148 D 0.296

Last Answer : C 0.148

Which of the following statements is/are true? A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B. Shaft vibrates with maximum frequency when rotors rotate in same direction C. Zero node behavior is observed in rotors rotating in opposite direction D. All of the above

Description : Which of the following statements is/are true? A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B. Shaft vibrates with maximum frequency when rotors ... C. Zero node behavior is observed in rotors rotating in opposite direction D. All of the above

Last Answer : A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? A. Increases 4 times B. Increases 2 times C. Decreases 4 times D. Decreases 2 times

Description : If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? A. Increases 4 times B. Increases 2 times C. Decreases 4 times D. Decreases 2 times

Last Answer : B. Increases 2 times

Which of the following statements is/are true? A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B) Shaft vibrates with maximum frequency when rotors rotate in same direction C) Zero node behavior is observed in rotors rotating in opposite direction D) All of the above

Description : Which of the following statements is/are true? A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B) Shaft vibrates with maximum frequency when rotors ... C) Zero node behavior is observed in rotors rotating in opposite direction D) All of the above

Last Answer : A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

Which of the following statements is/are true? a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction b. Shaft vibrates with maximum frequency when rotors rotate in same direction c. Zero node behavior is observed in rotors rotating in opposite direction d. All of the above

Description : Which of the following statements is/are true? a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction b. Shaft vibrates with maximum frequency when rotors ... c. Zero node behavior is observed in rotors rotating in opposite direction d. All of the above

Last Answer : a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

_______ torsional vibrations will occur in a two-rotor system only if both rotors have the same frequency. (A) Free (B) Forced (C) Unbalanced (D) None of the above

Description : _______ torsional vibrations will occur in a two-rotor system only if both rotors have the same frequency. (A) Free (B) Forced (C) Unbalanced (D) None of the above

Last Answer : (A) Free

f the length inertia is decreased to nine times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 3 times b) Increases 9 times c) Decreases 9 times d) Decreases 3 times

Description : f the length inertia is decreased to nine times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 3 times b) Increases 9 times c) Decreases 9 times d) Decreases 3 times

Last Answer : a) Increases 3 times

Calculate the free torsional vibrations of a single motor system from the following data: C = 8 GN/m 2 , L=9m, I = 600 Kg-m 2 , J = 8×10 4 m 4 a) 162,132 b) 172,132 c) 182,132 d) 192,132

Description : Calculate the free torsional vibrations of a single motor system from the following data: C = 8 GN/m 2 , L=9m, I = 600 Kg-m 2 , J = 8×10 4 m 4 a) 162,132 b) 172,132 c) 182,132 d) 192,132

Last Answer : b) 172,132

If the mass moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Description : If the mass moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Last Answer : d) Decreases 2 times

If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Description : If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Last Answer : b) Increases 2 times

Free torsional vibrations of a single motor system increases with increase in polar moment of inertia. a) True b) False

Description : Free torsional vibrations of a single motor system increases with increase in polar moment of inertia. a) True b) False

Last Answer : b) False

Which of the following relation is correct regarding free torsional vibrations of a single motor system? a) Independent of modulus of rigidity b) Independent of polar moment of inertia c) Dependent on mass moment of inertia d) Independent of length of shaft

Description : Which of the following relation is correct regarding free torsional vibrations of a single motor system? a) Independent of modulus of rigidity b) Independent of polar moment of inertia c) Dependent on mass moment of inertia d) Independent of length of shaft

Last Answer : c) Dependent on mass moment of inertia

Free torsional vibrations will occur in a two rotor system only if both rotors have same frequency. a) True b) False

Description : Free torsional vibrations will occur in a two rotor system only if both rotors have same frequency. a) True b) False

Last Answer : a) True

Critical speed of shaft and disc system A) Is equal to natural frequency of the system in transverse vibration B) Is equal to natural frequency of the system in torsional vibration C) Is equal to natural frequency of the system in longitudinal vibration D) Bears no relationship to any of the system natural frequency

Description : Critical speed of shaft and disc system A) Is equal to natural frequency of the system in transverse vibration B) Is equal to natural frequency of the system in torsional vibration C) Is ... of the system in longitudinal vibration D) Bears no relationship to any of the system natural frequency

Last Answer : A) Is equal to natural frequency of the system in transverse vibration

If the particle of a body vibrate along a circular arc, whose centre lies on the axis of the shaft then the body is said to have A) Transverse vibration B) Longitudinal vibration C) Torsional vibration D) None of the above

Description : If the particle of a body vibrate along a circular arc, whose centre lies on the axis of the shaft then the body is said to have A) Transverse vibration B) Longitudinal vibration C) Torsional vibration D) None of the above

Last Answer : C) Torsional vibration

When a body is subjected to transverse vibrations, the stress induced in a body will be A Shear stress B Bending stress C Tensile stress D Compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be A Shear stress B Bending stress C Tensile stress D Compressive stress

Last Answer : B Bending stress

Calculate the static deflection in μm of transverse vibrations if the frequency is 200Hz. A. 6.21 B. 0.621 C. 62.1 D. 0.006

Description : Calculate the static deflection in μm of transverse vibrations if the frequency is 200Hz. A. 6.21 B. 0.621 C. 62.1 D. 0.006

Last Answer : A. 6.21

When a body is subjected to transverse vibrations, the stress induced in a body B will be (A) Shear stress (B) Bending stress (C) Tensile stress (D)Compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body B will be (A) Shear stress (B) Bending stress (C) Tensile stress (D)Compressive stress

Last Answer : (B) Bending stress

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Last Answer : b) bending stress

Calculate the static deflection in μm of transverse vibrations if the frequency is 200Hz. a) 6 b) 0.6 c) 60 d) 0.006

Description : Calculate the static deflection in μm of transverse vibrations if the frequency is 200Hz. a) 6 b) 0.6 c) 60 d) 0.006

Last Answer : a) 6

Calculate the natural frequency of transverse vibrations if the static deflection is 0.01mm. a) 157.6 b) 144.8 c) 173.2 d) 154.1

Description : Calculate the natural frequency of transverse vibrations if the static deflection is 0.01mm. a) 157.6 b) 144.8 c) 173.2 d) 154.1

Last Answer : a) 157.6

For the same dimensions of a beam, transverse vibrations have a lower frequency than longitudinal frequency.a) True b) False

Description : For the same dimensions of a beam, transverse vibrations have a lower frequency than longitudinal frequency.a) True b) False

Last Answer : a) True

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Last Answer : d) 41

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) bending stress c) tensile stress d) compressive stress

Last Answer : b) bending stress

When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) tensile stress c) compressive stress d) none of the mentioned

Description : When a body is subjected to transverse vibrations, the stress induced in a body will be a) shear stress b) tensile stress c) compressive stress d) none of the mentioned

Last Answer : b) tensile stress

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? A x = (A + Bt) e – ωt B x = X e – ξωt (sin ω d t + Φ) C x = (A – Bt) e – ωt D x = X e – ξωt (cos ω d t + Φ)

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... Φ) C x = (A - Bt) e - ωt D x = X e - ξωt (cos ω d t + Φ)

Last Answer : A x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? A. x = (A + Bt) e – ωt B. x = X e – ξωt (sin ω d t + Φ) C. x = (A – Bt) e – ωt D. x = X e – ξωt (cos ω d t + Φ

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... ) C. x = (A - Bt) e - ωt D. x = X e - ξωt (cos ω d t + Φ

Last Answer : A. x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the A differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? ( A ) x = (A + Bt) e – ωt (B)x = X e – ξωt (sin ω d t + Φ) (C)x = (A – Bt) e – ωt ( D )x = X e – ξωt (cos ω d t + Φ

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the A differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... (C)x = (A - Bt) e - ωt ( D )x = X e - ξωt (cos ω d t + Φ

Last Answer : ( A ) x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equati damped free vibrations having single degree of freedom. What will be the solution to this differ equation if the system is critically damped? a. x = (A + Bt) e – ωt b. x = X e – ξωt (sin ω d t + Φ) c. x = (A – Bt) e – ωt d. x = X e – ξωt (cos ω d t + Φ)

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equati damped free vibrations having single degree of freedom. What will be the solution to this differ equation if the system is critically ... c. x = (A - Bt) e - ωt d. x = X e - ξωt (cos ω d t + Φ)

Last Answer : a. x = (A + Bt) e – ωt

When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as * 1 point (A) simple pendulum (B) torsional pendulum (C) compound pendulum (D) second’s pendulum

Description : When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as * 1 point (A) simple pendulum (B) torsional pendulum (C) compound pendulum (D) second’s pendulum

Last Answer : (C) compound pendulum