What is the purpose of carona ring?

What is the purpose of carona ring? 
by

1 Answer

Answer :

To minimize the arcing current during switching operations of disconnecting switches. 
by

Related questions

How carona discharge is prevented in generator insulation?

Description : How carona discharge is prevented in generator insulation?

Last Answer : To prevent carona discharges between insulation and the wall of the slot, the insulation in slot portion is coated with semi conducting varnish. This eliminates the formation of creepage sparks during operation and during HV test. 

What was the treatment of carona virus?

Description : What was the treatment of carona virus?

Last Answer : Treatment is directed at relieving symptoms and may include: Pain relievers; Cough syrup or medication; Rest; Fluid intake. If your doctor thinks you can be treated ...

What is the purpose of connecting external resistors to slip ring Induction motor?

Description : What is the purpose of connecting external resistors to slip ring Induction motor?

Last Answer : It increases starting torque and decreases starting current.

What is the purpose of grading ring?

Description : What is the purpose of grading ring?  

Last Answer : This assembly is provided to have uniform voltage gradient.  

What is the the purpose of the baulk ring?

Description : What is the the purpose of the baulk ring?

Last Answer : baulk ring is the device that prevent 2 knyans being selected at the same time

In a ring network, every device has exactly ______neighbors for communicating purpose: a) 2 b) 4 c) 6 d) None of These

Description : In a ring network, every device has exactly ______neighbors for communicating purpose: a) 2 b) 4 c) 6 d) None of These

Last Answer : a) 2

What is the purpose of the guard ring in a megohmmeter?

Description : What is the purpose of the guard ring in a megohmmeter?

Last Answer : Shunts leakage current, which prevents false readings

What is the purpose of the guard ring in a megohmmeter?

Description : What is the purpose of the guard ring in a megohmmeter?

Last Answer : Shunts leakage current, which prevents false readings

The purpose of guard ring in transmission lines is to

Description : The purpose of guard ring in transmission lines is to  (1) reduce the earth capacitance of the lowest unit. (2) increase the earth capacitance of the lowest unit. (3) reduce the transmission lines losses. (4) reduce the reactance of the line

Last Answer : The purpose of guard ring in transmission lines is to reduce the earth capacitance of the lowest unit.

Which of the following busbar arrangement is generally employed in distribution system: a) One-and-half breaker arrangement b) Main and transfer arrangement c) Ring main distribution system d) Single busbar arrangement system

Description : Which of the following busbar arrangement is generally employed in distribution system: a) One-and-half breaker arrangement b) Main and transfer arrangement c) Ring main distribution system d) Single busbar arrangement system

Last Answer : Ans: C

Which distribution system is more reliable? (a) Ring main system (b) Tree system (c) Radial system (d) All are equally reliable

Description : Which distribution system is more reliable? (a) Ring main system (b) Tree system (c) Radial system (d) All are equally reliable

Last Answer : Ans: A

Chattering of the collector ring brushes on a generator may be remedied by _____________. A. lubricating brush holders B. reinsulating the brushes C. cleaning the collector rings D. increasing length of pigtail

Description : Chattering of the collector ring brushes on a generator may be remedied by _____________. A. lubricating brush holders B. reinsulating the brushes C. cleaning the collector rings D. increasing length of pigtail

Last Answer : Answer: C

If an AC generator experiences voltage failure, the cause may be _____________. A. an open in the field circuit B. the brushes shifting out of the neutral plane C. excessive locked-rotor current D. a rotating slip ring

Description : If an AC generator experiences voltage failure, the cause may be _____________. A. an open in the field circuit B. the brushes shifting out of the neutral plane C. excessive locked-rotor current D. a rotating slip ring

Last Answer : Answer: A

Which of the following is a characteristic of fractional horsepower repulsion start motors? A. They start with a rotating stator field. B. The short circuiting ring is removed from the commutator while starting. C. The brushes are removed from the commutator while starting. D. They have a low starting torque.

Description : Which of the following is a characteristic of fractional horsepower repulsion start motors? A. They start with a rotating stator field. B. The short circuiting ring is removed from the commutator while ... brushes are removed from the commutator while starting. D. They have a low starting torque.

Last Answer : Answer: B

Which of the following statements represents the FIRST step in seating new brushes on slip rings? A. Wrap sandpaper around the slip rings and slide it back and forth between the brushes and the slip rings. B. Press the brushes against the slip ring with a wood block. C. Increase brush pressure and run at no load for 3 to 4 hours. D. Apply seating compound under the brushes and run at no load for 2 hours.

Description : Which of the following statements represents the FIRST step in seating new brushes on slip rings? A. Wrap sandpaper around the slip rings and slide it back and forth between the brushes and the slip rings. B. ... to 4 hours. D. Apply seating compound under the brushes and run at no load for 2 hours.

Last Answer : Answer: A

The ring circuit of the system shown in the illustration would become inoperative if a ground developed at ____________. EL-0093 A. either terminal 'T' or 'C' B. either terminal 'B' or 'R' C. both terminals 'B' and 'C' D. both terminals 'T' and 'R'

Description : The ring circuit of the system shown in the illustration would become inoperative if a ground developed at ____________. EL-0093 A. either terminal 'T' or 'C' B. either terminal 'B' or 'R' C. both terminals 'B' and 'C' D. both terminals 'T' and 'R'

Last Answer : Answer: C

Component 'D' in section 'I' shown in the illustration represents a ____________. EL-0093 A. selector switch B. vibrating reed indicator C. junction box D. ring counter

Description : Component 'D' in section 'I' shown in the illustration represents a ____________. EL-0093 A. selector switch B. vibrating reed indicator C. junction box D. ring counter

Last Answer : Answer: A

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

The pushbutton on the handset of a ship's sound-powered telephone must be depressed to ______________. A. talk then released to listen B. listen then released to talk C. both talk and listen D. ring the station being called

Description : The pushbutton on the handset of a ship's sound-powered telephone must be depressed to ______________. A. talk then released to listen B. listen then released to talk C. both talk and listen D. ring the station being called

Last Answer : Answer: C

A degree of control over the speed of a slip ring induction motor can be obtained by _____________. A. adjusting governor linkage B. changing the number of phases to the motor C. inserting resistance into the stator circuit D. inserting resistance into the rotor circuit

Description : A degree of control over the speed of a slip ring induction motor can be obtained by _____________. A. adjusting governor linkage B. changing the number of phases to the motor C. inserting resistance into the stator circuit D. inserting resistance into the rotor circuit

Last Answer : Answer: D

Slip ring induction motor advantages and disadvantages compared to squirrel cage motors?

Description : Slip ring induction motor advantages and disadvantages compared to squirrel cage motors?

Last Answer : Advantages: High starting torque with low starting current Smooth acceleration under heavy loads No abnormal heating during starting Good running characteristics after external rotor resistances are cut out ... cage motors The speed regulation is poor when run with resistance in the rotor circuit

What is the use of shading ring in a pole motor?

Description : What is the use of shading ring in a pole motor?

Last Answer : The shading coil causes the flux in the shaded portion to lag behind the flux in unshaded portion of pole. This gives in effect a rotation of flux across the pole face and under the influence of this moving flux a staRting torque is developed.

Mention different types of speed control of slip ring induction motor?

Description : Mention different types of speed control of slip ring induction motor?

Last Answer : a) By changing supply frequency b) By changing the number of stator poles c) By rotor rheostat control d) By operating two motors in cascade

How the slip ring motor is started?

Description : How the slip ring motor is started?

Last Answer : The slip ring motor is started by using rotor resistance starter. The starter consists of star connected resistance to slip rings. While starting the full resistance is included in the rotor circuit to ... running condition the slip rings are shorted and so it is equivalent to squirrel cage rotor.

What are the advantages of slip ring motor over squirrel cage motor?

Description : What are the advantages of slip ring motor over squirrel cage motor?

Last Answer : 1. The starting torque can be varied by adding resistance to rotor. 2. The speed of the machine can be varied by injecting an emf through slip rings to the rotor.

How cooling is done for slip ring and brush gear?

Description : How cooling is done for slip ring and brush gear? 

Last Answer : A centrifuge fan is mounted on the shaft in between two slip rings for ventilation of the slip rings and brush gear.

What is the material of slip ring?

Description : What is the material of slip ring? 

Last Answer : Alloy steel