Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar
Last Answer : d) Collar
Description : The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above
Last Answer : (D) All the above
Description : At the socket and spigot joint, (A) Enlarged end of the pipe is called socket (B) Normal end of the pipe is called spigot (C) Spigot is fitted into the socket (D) All the above
Description : In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint
Last Answer : (B) Flanged joint
Description : The joint used for joining the plain ends of cast iron pipes, is (A) Flanged joint (B) Socket and spigot joint (C) Dresser coupling joint (D) Flexible joint
Last Answer : (C) Dresser coupling joint
Description : Explain About Spigot And Socket Joint?
Last Answer : This joint is generally used to connect cast iron pipes which are buried in ground .This is also suitable for straight pipe line carrying water and this joint has less rigidity.
Description : __________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion
Last Answer : Option B
Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these
Last Answer : A. Co-axial
Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False
Last Answer : A. True
Description : Cotter joint is a permanent fastening. a) true b) false
Last Answer : b) false
Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing
Last Answer : A. Cotter joints
Description : Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above
Last Answer : c) Axial tensile or compressive
Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False
Last Answer : b) False
Description : Cotter joint is connected to parallel roads . A. True B. False
Last Answer : B. False
Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False
Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Last Answer : B. Knuckle joint
Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing
Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False
Description : Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False
Last Answer : a) True
Description : The principle of wedge action is used in cotter joint. a) True b) False
Description : Cotter joint is used when the members are subjected to which type of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the mentioned
Description : A backing ring is used inside the pipe joint when making a (a) butt weld (b) fillet weld (c) sleeve weld (d) socket weld (e) tube weld.
Last Answer : (a) butt weld
Description : A knuckle joint is also called socket pin joint. a) True b) False
Description : The taper on cotter and slot is fomed on both the location is agreed or not.. a) agree b) disagree
Last Answer : b) disagree
Description : Cotter joints is used for transforming rotating torque. A. True B. False
Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load
Last Answer : C. Axial tensile or compressive load
Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined
Last Answer : A. Co - axial
Description : Taper on Cotter is varies from A. 1 in 15 to 1 in 12 B. 1 in 20 to 1 in 15 C. 1 in 25 to 1 in 20 D. 1 in 48 to 1 in 24
Last Answer : D. 1 in 48 to 1 in 24
Description : The draw of cotter should not be more than the........ A. 3 mm B. 4 mm C. 5 mm D. 6 mm
Last Answer : A. 3 mm
Description : Taper is made cotter and slot on both the side. A. Yes B. No
Last Answer : B. No
Description : Glass pipes can be joined by (A) Flanges (B) Welding (C) Soldering (D) Bell and spigot joint
Last Answer : (D) Bell and spigot joint
Description : Allen key is used to tighten (A) Cap screw with hexagonal head (B) Cap screw with fillister head (C) Cap screw with hexagonal socket head (D) Cap screw with flat head
Last Answer : (C) Cap screw with hexagonal socket head
Description : Which of the following is an antifriction bearing? (a) journal bearing (b) collar bearing (c) needle bearing (d) pivot bearing
Last Answer : (c) needle bearing
Description : Which one of the following pair is correctly matched? [IES-2000] (a) Beauchamp tower ........................First experiments on journal bearings (b) Osborne Reynolds ........................ ... .Pivot and Collar bearings (d) Ball bearings...............................Hydrodynamic lubrication
Last Answer : (a) Beauchamp tower ........................First experiments on journal bearings
Description : What was the two purpose of providing clearance in cotter joint?
Last Answer : Feel Free to Answer
Description : The knuckle joint is made up of... A. Cast iron B. stainless Steel C. Teflon D. All of the above
Last Answer : D. All of the above
Description : The diameter of knuckle pin in the knuckle joint is usually... A. 0.5 d B. 0.8 d C. 1.5 d D. d
Last Answer : D. d
Description : The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False
Description : The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False
Description : Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False
Description : Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above
Description : Maximum rod connecting limit by using knuckle joint is . A. 2 B. 3 C. 4 D. 5
Last Answer : B. 3