What happens if you make a property static?

What happens if you make a property static?
by

1 Answer

Answer :

They become class properties. 
by

Related questions

Do you need to instantiate a class before accessing a Shared (static) member? Why or why not?

Description : Do you need to instantiate a class before accessing a Shared (static) member? Why or why not?

Last Answer : Because a Shared (static) member belongs to the type rather than to any instance of the type, you can access the member without first creating an instance of the type.

Can you declare an override method to be static if the original method is not static?

Description : Can you declare an override method to be static if the original method is not static? 

Last Answer : No. The signature of the virtual method must remain the same. (Note: Only the keyword virtual is changed to keyword override)

An operator declaration must include a public and static modifier, can it have other modifiers?

Description : An operator declaration must include a public and static modifier, can it have other modifiers?

Last Answer : No

Can you declare an override method to be static if the original method is not static?

Description : Can you declare an override method to be static if the original method is not static? 

Last Answer : No. The signature of the virtual method must remain the same. (Note: Only the keyword virtual is changed to keyword override)

Can you declare the override method static while the original method is nonstatic?

Description : Can you declare the override method static while the original method is nonstatic?

Last Answer : No, you can’t, the signature of the virtual method must remain the same, only the keyword virtual is changed to keyword override. 

Define what is the Static Method?

Description : Define what is the Static Method?

Last Answer : It is possible to declare a method as Static provided that they don’t attempt to access any instance data or other instance methods.

Define what is a static member?

Description : Define what is a static member?

Last Answer : The member defined as static which can be invoked directly from the class level, rather than from its instance.

Can we declare a block as static in c#?

Description : Can we declare a block as static in c#?

Last Answer : No, because c# does not support static block, but it supports static method.

Can a class have a static constructor?

Description : Can a class have a static constructor?

Last Answer : Yes, a class can have a static constructor. Static constructors are called automatically, immediately before any static fields are accessed, and are generally used to initialize static class ... are referenced. Static constructors are called before instance constructors. An example is shown below.

Can you have parameters for static constructors?

Description : Can you have parameters for static constructors?

Last Answer : No, static constructors cannot have parameters.

Define what is the difference between static and instance methods?

Description : Define what is the difference between static and instance methods?

Last Answer : A method declared with a static modifier is a static method. A static method does not operate on a specific instance and can only access static members. A method declared without a static modifier is an ... can be explicitly accessed as this. It is an error to refer to this in a static method.

Define what is the difference between constants, readonly and, static?

Description : Define what is the difference between constants, readonly and, static?

Last Answer : 1. Constants: The value can’t be changed. 2. Read-only: The value will be initialized only once from the constructor of the class. 3. Static: Value can be initialized once.

Can “this” be used within a static method?

Description : Can “this” be used within a static method?

Last Answer : No ‘This’ cannot be used in a static method. As only static variables/methods can be used in a static method.

Can we use “this” inside a static method in C#?

Description : Can we use “this” inside a static method in C#?

Last Answer : No. We can’t use “this” in a static method.

Define what are the differences between static, public and void in C#?

Description : Define what are the differences between static, public and void in C#?

Last Answer : 1. Static classes/methods/variables are accessible throughout the application without creating an instance. The compiler will store the method address as an entry point. 2. Public methods or variables are accessible ... 3. The void is used for the methods to indicate it will not return any value.

Explain the “static” keyword in C#?

Description : Explain the “static” keyword in C#?

Last Answer : “Static” keyword can be used for declaring a static member. If the class is made static then all the members of the class are also made static. If the variable is made static then it will have a single instance and the value change is updated in this instance.

What are the three possible settings for the CommandType property of a SqlCommand object or an OleDbCommand object, and what does each mean?

Description : What are the three possible settings for the CommandType property of a SqlCommand object or an OleDbCommand object, and what does each mean?

Last Answer : A Command object can have a CommandType property setting of Text, StoredProcedure, or TableDirect. When set to Text, the command executes the SQL string that is stored in the Command object's ... that the command should return the entire contents of the table indicated by the CommandText property. 

What does the keyword “virtual” declare for a method or property?

Description : What does the keyword “virtual” declare for a method or property? 

Last Answer : The method or property can be overridden. 

What’s the implicit name of the parameter that gets passed into the set method/property of a class?

Description : What’s the implicit name of the parameter that gets passed into the set method/property of a class?

Last Answer : Value. The data type of the value parameter is defined by whatever data type the property is declared as.

Can a property be a ref or out parameter?

Description : Can a property be a ref or out parameter?

Last Answer : A property is not classified as a variable – it can’t be ref or out parameter. 

What does the keyword “virtual” declare for a method or property?

Description : What does the keyword “virtual” declare for a method or property? 

Last Answer : The method or property can be overridden.

What’s the implicit name of the parameter that gets passed into the set method/property of a class?

Description : What’s the implicit name of the parameter that gets passed into the set method/property of a class?

Last Answer : Value. The data type of the value parameter is defined by whatever data type the property is declared as.

What happens in memory when you Box and Unbox a value-type?

Description : What happens in memory when you Box and Unbox a value-type?

Last Answer : Boxing converts a value-type to a reference-type, thus storing the object on the heap. Unboxing converts a reference-type to a value-type, thus storing the value on the stack.

What happens if you inherit multiple interfaces and they have conflicting method names?

Description : What happens if you inherit multiple interfaces and they have conflicting method names?

Last Answer : It’s up to you to implement the method inside your own class, so implementation is left entirely up to you. This might cause a problem on a higher-level scale if similarly named methods from different interfaces expect different data, but as far as compiler cares you’re okay. To Do: Investigate 

What happens in memory when you Box and Unbox a value-type?

Description : What happens in memory when you Box and Unbox a value-type?

Last Answer : Boxing converts a value-type to a reference-type, thus storing the object on the heap. Unboxing converts a reference-type to a value-type, thus storing the value on the stack.

What happens if you inherit multiple interfaces and they have conflicting method names?

Description : What happens if you inherit multiple interfaces and they have conflicting method names?

Last Answer : It’s up to you to implement the method inside your own class, so implementation is left entirely up to you. This might cause a problem on a higher-level scale if similarly named methods from different interfaces expect different data, but as far as compiler cares you’re okay.  To Do: Investigate 

Explain how to use the Begin and End methods on a Web Service to make an asynchronous method call.

Description : Explain how to use the Begin and End methods on a Web Service to make an asynchronous method call.

Last Answer : Every public Web method on a Web Service can be called either synchronously or asynchronously. To make an asynchronous call to a Web method, you call the method named Begin, where is the name of ... returned by Begin. This will allow you to retrieve the actual data returned by the Web method.

What si the difference between interface and abstractclass Select Answer:  1. interface contain only methods  2. we can't declare a variable for interface  3. interface contain only events  4. None  5. All

Description : What si the difference between interface and abstractclass Select Answer:  1. interface contain only methods  2. we can't declare a variable for interface  3. interface contain only events  4. None  5. All

Last Answer : Ans : 2 The only Difference between Interface and Abstract class is we can declare a variable in abstract class but we can't declare in variable interface

What is the lifespan for items stored in ViewState? Select Answer:  1. Item stored in ViewState exist for the life of the current page  2. Item stored in ViewState exist for the life of the current Session  3. Item stored in ViewState exist for the life of the current Applicaiton  4. Item stored in ViewState exist for the life of the current configuration

Description : What is the lifespan for items stored in ViewState? Select Answer:  1. Item stored in ViewState exist for the life of the current page  2. Item stored in ViewState exist for the life ... of the current Applicaiton  4. Item stored in ViewState exist for the life of the current configuration

Last Answer : 1. Item stored in ViewState exist for the life of the current page AS any web application works on request and response basis ,so on every post backs, The data in control gets lost. To retain page ... control with data. The life cycle of the view state exist for life of current running page only. 

Which one of the following tools is used to view the metadata information contained in a .NET assembly? Select Answer:  1. al.exe  2. ilasm.exe  3. vbx.exe  4. csc.exe  5. ildasm.exe

Description : Which one of the following tools is used to view the metadata information contained in a .NET assembly? Select Answer:  1. al.exe  2. ilasm.exe  3. vbx.exe  4. csc.exe  5. ildasm.exe

Last Answer :  5. ildasm.exe

How would you ensure that all relevant registry entries were removed in the event that installation of your application failed?

Description : How would you ensure that all relevant registry entries were removed in the event that installation of your application failed?

Last Answer : You can ensure that registry entries are removed, as well as perform any other “clean-up” tasks, by creating an Installer class and writing the appropriate code in the Rollback event handler. Then create a new Custom Action and set the InstallerClass, and EntryPoint properties to appropriate values.

Describe a general strategy for creating a setup project that terminates installation if a specific file is not already installed on the target machine.

Description : Describe a general strategy for creating a setup project that terminates installation if a specific file is not already installed on the target machine.

Last Answer : First, create a file search to search the file system for the specific file. Then create a launch condition to evaluate the results of the search. You can connect the launch condition to ... in the search's Property property in the expression specified by the launch condition's Condition property. 

What is the purpose of a bootstrapper application? When do you not need to create one?

Description : What is the purpose of a bootstrapper application? When do you not need to create one?

Last Answer : A bootstrapper application automatically detects if Windows Installer is installed on the target machine. If Windows Installer is not present, it installs Windows Installer before proceeding with the rest ... Installer 1.5 already installed) or have had Microsoft Installer 1.5 installed previously.

What is a native image? How do you create one?

Description : What is a native image? How do you create one?

Last Answer : A native image is a precompiled version of a .NET assembly. You can create a native image of your application by using the Ngen.exe utility.

Describe XCOPY deployment. Under what conditions is it useful? When can it not be used?

Description : Describe XCOPY deployment. Under what conditions is it useful? When can it not be used?

Last Answer : XCOPY deployment is a simple method of deployment where the DOS command XCOPY is used to copy the application directory and any subdirectories to the target machine. You can use XCOPY ... an application requires a more complex deployment or references shared assemblies, you cannot use XCOPY.

What is a shared assembly? How would you create one?

Description : What is a shared assembly? How would you create one?

Last Answer : An assembly is an assembly of which only a single copy is installed per machine. This copy can be shared by multiple applications. To make an assembly a shared assembly, you must first assign it a strong name, and then install it to the global assembly cache.

Briefly highlight the differences between imperative and declarative security as they pertain to code access security.

Description : Briefly highlight the differences between imperative and declarative security as they pertain to code access security.

Last Answer : Imperative security is implemented by calling methods of Permission objects in code at run time. Declarative security is configured by attaching attributes representing permissions to classes ... request assembly-wide permissions using the Assembly (assembly) directive with declarative security.

Explain how to retrieve information from the configuration file at run time. How would you store information in the configuration file at design time?

Description : Explain how to retrieve information from the configuration file at run time. How would you store information in the configuration file at design time?

Last Answer : You must first create an instance of AppSettingsReader to read the configuration file. You can then call the GetValue method to read values represented in the configuration file. To add configuration ... used to retrieve the entry. The value can be changed between executions of the application.

Describe how to use code to retrieve resources at run time.

Description : Describe how to use code to retrieve resources at run time.

Last Answer : You must first create an instance of the ResourceManager class that is associated with the assembly that contains the desired resource. You can then use the GetString method to retrieve string resources or the GetObject method to retrieve object resources.

Describe how to sign your assembly with a strong name. Why would you want to do this?

Description : Describe how to sign your assembly with a strong name. Why would you want to do this?

Last Answer : To sign your assembly with a strong name, you must have access to a key file or create one with the strong name utility (sn.exe). You then specify the key file in the AssemblyInfo file and ... identity, a strong name is required if you want to install your assembly to the Global Assembly Cache.

Explain how to use the PrintPreviewDialog control to display a preview of a printed document before it is printed.

Description : Explain how to use the PrintPreviewDialog control to display a preview of a printed document before it is printed.

Last Answer : You display a preview of a printed document with the PrintPreviewDialog control by first setting the PrintDocument property of the PrintPreviewDialog instance to the PrintDocument you want to preview, then by calling the PrintPreviewDialog.Show command to display the dialog box. 

Explain the difference between Globalization and Localization.

Description : Explain the difference between Globalization and Localization.

Last Answer : Globalization refers to the application of culture-specific format to existing data. Localization refers to providing new culture-specific resources and retrieving the appropriate resources based on the culture setting. 

Explain how to convert data in legacy code page formats to the Unicode format.

Description : Explain how to convert data in legacy code page formats to the Unicode format.

Last Answer : You can use the Encoding.Convert method to convert data between encoding types. This method requires instances of both encoding types and an array of bytes that represents the data to be converted. ... GetBytes method and can convert an array of bytes back to chars with the Encoding.GetChars method.

Describe how to create localized versions of a form.

Description : Describe how to create localized versions of a form.

Last Answer : To create a localized version of a form, set the Localizable property to true. Then set the Language property to the language/region for which you want to create the localized form. Make ... be stored in resource files and loaded when the CurrentUICulture is set to the appropriate CultureInfo. 

Explain how to use the HelpProvider component to provide help for UI elements.

Description : Explain how to use the HelpProvider component to provide help for UI elements.

Last Answer : You can provide either a HelpString or a help topic for UI elements with the HelpProvider. The HelpProvider provides HelpString, HelpKeyWord, and HelpNavigator properties for each control on the form. If ... particular element is displayed when the element has the focus and the F1 key is pressed.

Briefly describe the five accessibility requirements of the Certified for Windows logo program.

Description : Briefly describe the five accessibility requirements of the Certified for Windows logo program.

Last Answer : The five requirements are o Support standard system settings. This requires your application to be able to conform to system settings for colors, fonts, and other UI elements. o Be ... information by sound alone. This requirement can be met by providing redundant means of conveying information.

Briefly describe how to use the PrintDocument component to print a document. Discuss maintaining correct line spacing and multipage documents.

Description : Briefly describe how to use the PrintDocument component to print a document. Discuss maintaining correct line spacing and multipage documents.

Last Answer : The PrintDocument class exposes the Print method, which raises the PrintPage event. Code to render printed items to the printer should be placed in the PrintPage event handler. The PrintPage event ... been printed, you must incorporate all logic for printing multiple pages into your event handler.

Describe how to create a form or control with a nonrectangular shape.

Description : Describe how to create a form or control with a nonrectangular shape.

Last Answer : Set the Region property of the form or control to a Region object that contains the irregular shape. You can create a Region object from a GraphicsPath object.

Describe the role of the LicenseProvider in control licensing.

Description : Describe the role of the LicenseProvider in control licensing.

Last Answer : The LicenseProvider controls license validation and grants run-time licenses to validly licensed components. The LicenseManager.Validate method checks for an available license file and checks ... of LicenseProvider. You specify which LicenseProvider to use by applying the LicenseProviderAttribute. 

Describe the general procedure for rendering text to a drawing surface.

Description : Describe the general procedure for rendering text to a drawing surface.

Last Answer : You must first obtain a reference to a Graphics object. Next, create an instance of a GraphicsPath object. Use the GraphicsPath.AddString method to add text to the GraphicsPath. Then, call the Graphics.DrawPath or Graphics.FillPath to render the text.