What would have the effect on the gas pressure if collisions between the gas molecules are not elastic?

What would have the effect on the gas pressure if collisions between the gas molecules are not elastic?
by

1 Answer

Answer :

Ans. The gas pressure would gradually become zero as molecules will gradually slow down and ultimately settle down due to constant loss of energy.
by

Related questions

What is meant by Elastic Collision?

Description : What is meant by Elastic Collision?

Last Answer : When gas molecules collide with each other and the total energy doesn’t increase or decrease after the collision, then this type of collision will be called as elastic collision.

Why excluded volume ‘b’ is four times the actual volume of the molecules?

Description : Why excluded volume ‘b’ is four times the actual volume of the molecules?

Last Answer : Ans. The two molecules cannot come closer than distance 2r and the volume of sphere with radius 2r is four times the volume of one molecule.

Use the information and data given below to answer the questions • Stronger intermolecular forces result in higher boiling point • Strength of London forces increases with the number of electrons in the molecule • Boiling point of HF ,HCl, HBr and HI are 293K,189K,206K and 238K respectively (a) Which type of intermolecular forces are present in the molecules HCl, HBr and HI? (b) Looking at the trend of boiling points of HCl, HBr and HI, explain, out of dipole interaction and London interaction, which one predominant here? (c) Why is the boiling point of HF highest while that of HCl lowest?

Description : Use the information and data given below to answer the questions Stronger intermolecular forces result in higher boiling point Strength of London forces increases with the number of electrons in the molecule ... here? (c) Why is the boiling point of HF highest while that of HCl lowest?

Last Answer : Ans :( a) In the molecules HCl, HBr and HI, dipole-dipole interaction and London forces are present. (b) Dipole moment of HCl > HBr > HI but boiling point of HCl < HBr

Predict what will happen if intermolecular forces between the molecules are very weak

Description : Predict what will happen if intermolecular forces between the molecules are very weak

Last Answer : Ans. When intermolecular forces are very weak , molecules do not cling together t o make liquid and solid.

What would happen if dipole develops momentarily in atoms and non polar molecules which are electrically symmetrical?

Description : What would happen if dipole develops momentarily in atoms and non polar molecules which are electrically symmetrical?

Last Answer : Ans. London forces or dispersion forces are developed.

Which type of intermolecular forces exists among the following molecules? (a) H2S molecules (b) H2O (c) Cl2 and CCl4 (d) SiH4 (e) Helium (f) He atoms and HCl molecules

Description : Which type of intermolecular forces exists among the following molecules? (a) H2S molecules (b) H2O (c) Cl2 and CCl4 (d) SiH4 (e) Helium (f) He atoms and HCl molecules

Last Answer : Ans. (a) Dipole-Dipole interactions. (b)H-Bond. (c)Dispersion forces. (d)Dispersion forces. (e)Dispersion forces. (f)Induced dipole-dipole interactions.

Name two intermolecular forces that exist between HF molecules in liquid state.

Description : Name two intermolecular forces that exist between HF molecules in liquid state.

Last Answer : Ans. Dipole-dipole interaction and hydrogen bonding.

Applying Le- Chatelier's principle, predict the effect of temperature and pressure on evaporation of water.

Description : Applying Le- Chatelier's principle, predict the effect of temperature and pressure on evaporation of water.

Last Answer : Ans Evaporation of water can be represented as water + heat water vapours: i) With increase in pressure- the equilibrium tend to shift in direction where there is decrease in the vol. i.e. ... left. ii) with increase in temperature- the equilibrium shifts to right as it is an endothermic reaction.

What will be the effect on equilibrium if (i) a catalyst is added to it (ii) An inert gas is added at constant volume

Description : What will be the effect on equilibrium if (i) a catalyst is added to it (ii) An inert gas is added at constant volume

Last Answer : Ans. (i) The state of equilibrium is not disturbed on adding catalyst rather it is attained quickly. (ii) No effect on state of equilibrium

How gas exerts pressure on a container?

Description : How gas exerts pressure on a container?

Last Answer : Gas molecules have weak cohesive forces present between them, so these are widely separated from each other and move freely in all directions so they collide with each other and with the walls of container, in this way pressure is created.

Kinetic theory of gases assumes that the collisions between the molecules are  (a) perfectly elastic  (b) perfectly inelastic  (c) partly elastic  (d) partly inelastic  (e) partly elastic and partly inelastic.

Description : Kinetic theory of gases assumes that the collisions between the molecules are  (a) perfectly elastic  (b) perfectly inelastic  (c) partly elastic  (d) partly inelastic  (e) partly elastic and partly inelastic.

Last Answer : Answer : a

Write the effect of temperature on Equilibrium constant.

Description : Write the effect of temperature on Equilibrium constant.

Last Answer : Ans. The value of Equilibrium constant changes with the temperature. The increase in rate depends upon activation energy .As the activation energy are different for forward & backward direction .So temperature will ... & backward direction. As K= Kf/ Kb ,so the state of equilibrium will be altered.

Explain the effect of increasing the temperature of a liquid, on intermolecular forces operating between its particles. What will happen to the viscosity of a liquid if its temperature is increased? Arrange the following in increasing order of viscosity-water, hexane, glycerine.

Description : Explain the effect of increasing the temperature of a liquid, on intermolecular forces operating between its particles. What will happen to the viscosity of a liquid if its temperature is increased? Arrange the following in increasing order of viscosity-water, hexane, glycerine.

Last Answer : Ans. On increasing the temperature , the kinetic energy of liquid molecules increases so that it can overcome the attractive forces between the molecules and hence liquid can flow more easily i.e. viscosity decreases. Order of increasing viscosity : hexane < water < glycerine.

What is the effect of temperature on surface tension and viscosity of a liquid?

Description : What is the effect of temperature on surface tension and viscosity of a liquid?

Last Answer : Ans. Both decrease by increasing temperature.

Define intermolecular forces. Also write down effect of intermolecular forces on melting points & boiling points of substances?

Description : Define intermolecular forces. Also write down effect of intermolecular forces on melting points & boiling points of substances?

Last Answer : The forces of attraction present between the molecules of a compound are called Intermolecular forces''. Effect of intermolecular forces on the m.p and b.p of substances If intermolecular forces of attractions in ... . And if these forces are weak then the m.p and b.p will be relatively lower.

What is effect of heating on solids?

Description : What is effect of heating on solids?

Last Answer : On heating the solids, the vibrational energy of solid molecules or atoms increases, due to which vibrational motion of solid particles increases, as a result cohesive forces between the solid particles ... start melting, and convert into liquids. This temperature is called melting point of a solid.

Two ideal gases under same pressure and temperature are allowed to mix in an isolated system. What will be the sign of entropy change?

Description : Two ideal gases under same pressure and temperature are allowed to mix in an isolated system. What will be the sign of entropy change?

Last Answer : Ans. Entropy change (∆S) is positive. It is because disorder or degree of freedom increases on mixing.

i)Vapour pressure increases with increase in temperature. ii)Giycerine is more viscous than water.

Description : i)Vapour pressure increases with increase in temperature. ii)Giycerine is more viscous than water.

Last Answer : Ans. i) At higher temperature inter particle attraction weakens and more number of mole cules escape to vapour. ii) As interparticle forces are stronger in glycerine.

In the plot of Z(compressibility factor) vs P, Z attains a value of unity at a certain pressure. What does this signify?

Description : In the plot of Z(compressibility factor) vs P, Z attains a value of unity at a certain pressure. What does this signify?

Last Answer : Ans. It implies that at this value of pressure attractive and repulsive forces balance each other. Below this pressure attraction dominates and Z < 1. Above this pressure repulsion dominates and Z > 1.

State with expression Dalton’s law of partial pressure?

Description : State with expression Dalton’s law of partial pressure?

Last Answer : Ans. The total pressure exerted by the mixture of non reactive gases is equal to the sum of the partial pressures of individual gases. Ptotal = p1 + p2 + p3 +…………………

What will be the molar volume of nitrogen and argon at 273.15 K and 1atm pressure?

Description : What will be the molar volume of nitrogen and argon at 273.15 K and 1atm pressure?

Last Answer : Ans. At 273.15K and 1atm pressure every gas has molar volume = 22.4L.

Explain why the gas fizzes out when soda water bottle is opened?

Description : Explain why the gas fizzes out when soda water bottle is opened?

Last Answer : Ans. In soda water bottle carbon dioxide gas is dissolved under pressure. As soon as the bottle is opened, the pressure inside the bottle tends to decrease, so the solubility decreases and gas escapes out.

What happens to the dissociation of PCl5 in a closed vessel if He gas is introduced into it at the same temperature?

Description : What happens to the dissociation of PCl5 in a closed vessel if He gas is introduced into it at the same temperature?

Last Answer : Ans. No effect.

Which gas law governs Isothermal process ?

Description : Which gas law governs Isothermal process ?

Last Answer : Ans. Boyle’s law.

What is meant by compressibility factor of gases? How does its value deviate from that of an ideal gas in case of real gases and what does it indicate?

Description : What is meant by compressibility factor of gases? How does its value deviate from that of an ideal gas in case of real gases and what does it indicate?

Last Answer : Ans. It is the ratio of the product PV to nRT. Z = PV/nRT. For ideal gas its value is unity. Z < 1 indicates negative deviation i.e. gas is more compressible due predominance of attractive forces. Z > 1 indicates positive deviation i.e. gas is less compressible due predominance of repulsive forces.

Can a gas with a = 0 be liquefied?

Description : Can a gas with a = 0 be liquefied?

Last Answer : Ans. A gas with a = 0 means absence of intermolecular forces. Hence such a gas cannot be Liquified.

Arrange solid, liquid and gas in order of energy. Give reason.

Description : Arrange solid, liquid and gas in order of energy. Give reason.

Last Answer : Ans. Solid < liquid < gas. This is because solid absorb energy to change into a liquid which further absorb energy to change into a gas.

Justify the statement. A gas neither has a fixed shape nor a fixed volume.

Description : Justify the statement. A gas neither has a fixed shape nor a fixed volume.

Last Answer : Gas molecules possess large intermolecular spaces therefore the cohesive forces between them are insignificant. This is why a gas has no fixed shape or volume

Why is the PH of blood remains almost constant?

Description : Why is the PH of blood remains almost constant?

Last Answer : Ans: Blood is a buffer solution and resist the change in PH

How much is the percentage ionization of an electrolyte to classified is as 'weak electrolyte'?

Description : How much is the percentage ionization of an electrolyte to classified is as 'weak electrolyte'?

Last Answer : Ans:

What is the molarity of pure water?

Description : What is the molarity of pure water?

Last Answer : Ans: 55.5M

What type of substances are generally called 'electrolyte'?

Description : What type of substances are generally called 'electrolyte'?

Last Answer : Ans: Acid, bases and salts

Why the Equilibrium constant is taken as dimensionless?

Description : Why the Equilibrium constant is taken as dimensionless?

Last Answer : Ans. Activities are used in place of molar Conc. These represent the concentration or pressure with respect to standard state.

Write the significance of equilibrium constant?

Description : Write the significance of equilibrium constant?

Last Answer : Ans.The numerical value of equilibrium constant is a measure of the extent to which the reactants have been converted into products. A large value of K indicates large amount of ... its low value indicates less amount of reactants converted into products before achieving the equilibrium state.

What are the conditions for getting maximum yield of NH3 by Haber’s process?

Description : What are the conditions for getting maximum yield of NH3 by Haber’s process?

Last Answer : Ans. High conc. Of N2 &H2, Low Temp. & High Pressure.

if the equilibrium constant for the reaction is 4.0, what will be the equilibrium constant for the reverse reaction.

Description : if the equilibrium constant for the reaction is 4.0, what will be the equilibrium constant for the reverse reaction.

Last Answer : Ans. Kc=1/4

Which measurable property become constant in Water Water vapors equilibrium at constant temperature

Description : Which measurable property become constant in Water Water vapors equilibrium at constant temperature

Last Answer : Ans. Vapour pressure.

what do you mean by homogenous and heterogeneous equilibrium?

Description : what do you mean by homogenous and heterogeneous equilibrium?

Last Answer : Ans. Homogenous;-It is that equilibrium reaction in which all the reactants and the products are in the same phase. Heterogeneous equilibrium: - It is that equilibrium reaction in which all the reactants and the products are in two or more phases

Write Application of Equilibrium constant?

Description : Write Application of Equilibrium constant?

Last Answer : Ans. (i) To predict the extent of the reaction. (ii) To predict the direction of the reaction. (iii) To calculate the equilibrium concentration.

Write characteristics of Chemical equilibrium.

Description : Write characteristics of Chemical equilibrium.

Last Answer : Ans. (i) At equilibrium the rate of forward reaction becomes equal to rate of backward reaction. (ii) A chemical equilibrium established only if none of the products are allowed to escape out ... can be attained from either direction. (iv) Catalyst does not alter the state of equilibrium.

What will be the value of K ,If reaction is reversed?

Description : What will be the value of K ,If reaction is reversed?

Last Answer : Ans. The value of K will get inversed.

what is Equilibrium?

Description : what is Equilibrium?

Last Answer : Ans : Equilibrium represents the state of process in which properties such as temperature, pressure ,concentration of the system do not show any change with the passage of time. OR The state in which rate of forward reaction becomes equal to the rate of backward reaction.

Explain Hess’s law.

Description : Explain Hess’s law.

Last Answer : Ans. It states that the enthalpy change of the reaction remains the same whether the reaction is carried out in one step or several steps, i.e., ∆H = ∆H1 + ∆H2 + ∆H3 +…………

We are consuming a lot of electrical energy, solar energy etc Do you, therefore, conclude that energy of the universe is continuously decreasing? Explain. Which other thermodynamic quantity is continuously increasing or decreasing?

Description : We are consuming a lot of electrical energy, solar energy etc Do you, therefore, conclude that energy of the universe is continuously decreasing? Explain. Which other thermodynamic quantity is continuously increasing or decreasing?

Last Answer : Ans. No, energy of the universe remains constant (law of conservation of energy). Entropy of the universe is continuously increasing.

Water can be lifted into the water tanks at the top of the house with the help of a pump. Then why is not considered to be spontaneous?

Description : Water can be lifted into the water tanks at the top of the house with the help of a pump. Then why is not considered to be spontaneous?

Last Answer : Ans. A spontaneous process should continue taking place by itself after initiation . But this is not so in the given case because water will go up so long as the pump is working.

Is the bond energy of all the four C-H bonds in CH4 molecule equal? If not then why ? How is C-H bond energy then reported?

Description : Is the bond energy of all the four C-H bonds in CH4 molecule equal? If not then why ? How is C-H bond energy then reported?

Last Answer : Ans. No because after breaking of C-H bonds one by one, the electronic environments change. The reported value is the average of of the bond dissociation energies of the four C-H bonds.

What is the value of ∆G where ice and water are in equilibrium?

Description : What is the value of ∆G where ice and water are in equilibrium?

Last Answer : Ans. ∆G=0

What is the sign of enthalpy of formation of highly stable compound?

Description : What is the sign of enthalpy of formation of highly stable compound?

Last Answer : Ans. Negative.

Which have more entropy real crystal or ideal crystal and why?

Description : Which have more entropy real crystal or ideal crystal and why?

Last Answer : Ans. Real crystal has more entropy because it has more disorderness.

Out of carbon(diamond)and carbon (graphite) whose enthalpy of formation is taken as zero?

Description : Out of carbon(diamond)and carbon (graphite) whose enthalpy of formation is taken as zero?

Last Answer : Ans. Enthalpy of formation of carbon in the form of graphite is taken as zero because it is a more commonly found in stable form of carbon.