The ________ angle measures the satellite position clockwise from the direction of true north. A. azimuth B. elevation C. depression D. critical

The ________ angle measures the satellite position clockwise from the direction of true
north.
A. azimuth
B. elevation
C. depression
D. critical
by

1 Answer

Answer :

A. azimuth
by

Related questions

A satellite position is measured by its __________ angle with respect to the horizon. A. elevation B. depression C. azimuth D. critical

Description : A satellite position is measured by its __________ angle with respect to the horizon. A. elevation B. depression C. azimuth D. critical

Last Answer : A. elevation

_____ is the angle between the half-power radiation points A. Critical angle B. Beamwidth C. Angle of elevation D. Azimuth

Description : _____ is the angle between the half-power radiation points A. Critical angle B. Beamwidth C. Angle of elevation D. Azimuth

Last Answer : B. Beamwidth

_____ is the horizontal pointing angle of an antenna A. Azimuth B. Angle of elevation C. Right angle D. Beamwidth

Description : _____ is the horizontal pointing angle of an antenna A. Azimuth B. Angle of elevation C. Right angle D. Beamwidth

Last Answer : A. Azimuth

_______ is the horizontal pointing angle of an antenna. A. Right angle B. Angle of elevation C. Bandwidth D. Azimuth

Description : _______ is the horizontal pointing angle of an antenna. A. Right angle B. Angle of elevation C. Bandwidth D. Azimuth

Last Answer : D. Azimuth

Define the following terms with respect to satellite: (i) Azimuth Angle (ii) Elevation Angle

Description : Define the following terms with respect to satellite: (i) Azimuth Angle (ii) Elevation Angle

Last Answer : Angle of Elevation: It is the angle subtended between the line of sight joining the earth station antenna and the satellite and the horizontal plane. Azimuth Angle: The angle measured ... (sub-satellite point) on the horizontal plane at the earth station is called as azimuth.

In shipboard satellite dish antennas system, azimuth is referred as the _______. A. 0 to 90 degrees B. Vertical aiming of the antenna C. North to East D. Horizontal aiming of the antenna

Description : In shipboard satellite dish antennas system, azimuth is referred as the _______. A. 0 to 90 degrees B. Vertical aiming of the antenna C. North to East D. Horizontal aiming of the antenna

Last Answer : D. Horizontal aiming of the antenna

When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Description : When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Last Answer : A. 196 dB

A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms

Description : A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms

Last Answer : B. 275 ms

What device measures the angle between two radio frequencies and also the direction of propagation of a wave? A. Densimeter B. Absorption wavemeter C. Goniometer D. Ergometer

Description : What device measures the angle between two radio frequencies and also the direction of propagation of a wave? A. Densimeter B. Absorption wavemeter C. Goniometer D. Ergometer

Last Answer : C. Goniometer

What is the approximate percentage of earth coverage of a geostationary satellite at zero degree elevation? A. 33.3% B. 45.2% C. 42.5% D. 30.5%

Description : What is the approximate percentage of earth coverage of a geostationary satellite at zero degree elevation? A. 33.3% B. 45.2% C. 42.5% D. 30.5%

Last Answer : C. 42.5%

A precision Approach Procedure is defined as: a. An approach using bearing, elevation and distance information b. An approach with a crew of at least 2 pilots trained for such operations c. An instrument approach procedure utilizing azimuth and glide path information provided by an ILS or a PAR d. An approach using bearing, elevation, and, optionally, distance information

Description : A precision Approach Procedure is defined as: a. An approach using bearing, elevation and distance information b. An approach with a crew of at least 2 pilots trained for such operations c. An ... by an ILS or a PAR d. An approach using bearing, elevation, and, optionally, distance information

Last Answer : c. An instrument approach procedure utilizing azimuth and glide path information provided by an ILS or a PAR

A precision Approach Procedure is defined as: a. An approach using bearing, elevation and distance information b. An approach with a crew of at least 2 pilots trained for such operations c. An instrument approach procedure utilizing azimuth and glide path information provided by an ILS or a PAR

Description : A precision Approach Procedure is defined as: a. An approach using bearing, elevation and distance information b. An approach with a crew of at least 2 pilots trained for such ... An instrument approach procedure utilizing azimuth and glide path information provided by an ILS or a PAR

Last Answer : c. An instrument approach procedure utilizing azimuth and glide path information provided by an ILS or a PAR

You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency and the circuit breaker may be closed at any pointer position D. the same as the bus frequency but out of phase with it

Description : You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher ... at any pointer position D. the same as the bus frequency but out of phase with it

Last Answer : Answer: A

The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms

Description : The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms

Last Answer : A. 273 ms

The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Description : The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Last Answer : C. 1100 km

Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Last Answer : c.Counter clockwise rotations about the pivot point

Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Description : Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Last Answer : (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

The smaller horizontal angle between the true meridian and a survey line, is known (A) Declination (B) Bearing (C) Azimuth (D) Dip

Description : The smaller horizontal angle between the true meridian and a survey line, is known (A) Declination (B) Bearing (C) Azimuth (D) Dip

Last Answer : (C) Azimuth

Refers to the satellite orientation with respect to the earth A. Satellite altitude B. Satellite position C. Satellite location D. Satellite orbit

Description : Refers to the satellite orientation with respect to the earth A. Satellite altitude B. Satellite position C. Satellite location D. Satellite orbit

Last Answer : A. Satellite altitude

The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Description : The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Last Answer : A. station keeping

The physical location of a satellite is determined by its A. distance from the earth B. latitude and longitude C. reference to the stars D. position relative to the sun

Description : The physical location of a satellite is determined by its A. distance from the earth B. latitude and longitude C. reference to the stars D. position relative to the sun

Last Answer : B. latitude and longitude

Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? a. Less than b. Grater than c. Equal to d. Zero

Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? a. Less than b. Grater than c. Equal to d. Zero

Last Answer : b. Grater than

If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Last Answer : B. critical phased array

At a certain time, the MUF for transmission at an angle of incidence of 75° is 17 MHz. What is the critical frequency? A. 4.4 MHz B. 3.5 MHz C. 6.5 MHz D. 1.5 MHz

Description : At a certain time, the MUF for transmission at an angle of incidence of 75° is 17 MHz. What is the critical frequency? A. 4.4 MHz B. 3.5 MHz C. 6.5 MHz D. 1.5 MHz

Last Answer : A. 4.4 MHz

Descending pass for a satellite means a pass from A. North to South B. South to North C. East to West D. West to East

Description : Descending pass for a satellite means a pass from A. North to South B. South to North C. East to West D. West to East

Last Answer : A. North to South

The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination (4) Latitude

Description : The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination (4) Latitude

Last Answer : (3) Declination Explanation: Magnetic declination is the angle between compass north (the direction the north end of a compass needle points) and true north (the direction along the earth's surface towards the geographic North Pole.

The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Description : The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Last Answer : (C) Dip

Which one of the following parameters is considered to determine the reflectance of a vegetation canopy? (A) Solar zenith angle (B) Azimuth angle (C) Look angle (D) All of these

Description : Which one of the following parameters is considered to determine the reflectance of a vegetation canopy? (A) Solar zenith angle (B) Azimuth angle (C) Look angle (D) All of these

Last Answer : Answer: Option D

The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination(4) Latitude

Description : The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination(4) Latitude

Last Answer : Declination

Altitude angle, Zenith Angle, Day length, Solar Azimuth angle, Local solar time, Surface azimuth angle, Slope, Declination angle

Description : Altitude angle, Zenith Angle, Day length, Solar Azimuth angle, Local solar time, Surface azimuth angle, Slope, Declination angle

Last Answer : 1) Altitude angle (α ): It is defined as the angle between the central ray from the sun , and a horizontal plane containing the observer is the Solar altitude angle. At the Sunrise and Sunset the ... sun to the centre of the earth and the projection of this line upon the earth's equatorial plane.

An electromagnetic wave is ________ polarized when the electric field lies wholly in one plane containing the direction of propagation. A. Horizontally B. Linearly C. Circularly D. Vertically

Description : An electromagnetic wave is ________ polarized when the electric field lies wholly in one plane containing the direction of propagation. A. Horizontally B. Linearly C. Circularly D. Vertically

Last Answer : B. Linearly

Both frequency and phase modulation utilize ________ modulation A. Phase B. AM and FM C. Digital D. Angle

Description : Both frequency and phase modulation utilize ________ modulation A. Phase B. AM and FM C. Digital D. Angle

Last Answer : D. Angle

____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Last Answer : B. Sound intensity

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

Antiparallel strands of a DNA molecule means that (a) one strand turns clockwise (b) one strand turns anti-clockwise (c) the phosphate groups of two DNA strands, at their ends, share the same position (d) the phosphate groups at the start of two DNA strands are in opposite position (pole).

Description : Antiparallel strands of a DNA molecule means that (a) one strand turns clockwise (b) one strand turns anti-clockwise (c) the phosphate groups of two DNA strands, at their ends, share the same position (d) the phosphate groups at the start of two DNA strands are in opposite position (pole).

Last Answer : (d) the phosphate groups at the start of two DNA strands are in opposite position (pole).

Why do clocks rotate in a "Clockwise" direction?

Description : Why do clocks rotate in a "Clockwise" direction?

Last Answer : Because that is the direction that the shadow on sun dials moved, at least on the northern hemisphere. That is my guess.

In a CNC program block, N02 GO2 G91 X40 Z40……, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular interpolation in counter clockwise direction and absolute dimension c.circular interpolation in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Description : In a CNC program block, N02 GO2 G91 X40 Z40††, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular ... in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Last Answer : c.circular interpolation in clockwise direction and incremental dimension

1. Consider a circular loop of wire lying in the plane of the table. Let the current pass through the loop clockwise. Apply the right-hand rule to find out the direction of the magnetic field inside and outside the loop. -Physics-10

Description : 1. Consider a circular loop of wire lying in the plane of the table. Let the current pass through the loop clockwise. Apply the right-hand rule to find out the direction of the magnetic field inside and outside the loop. -Physics-10

Last Answer : Solution: For the downward direction of the current, the direction of the magnetic field will be as if emerging from the table outside the loop and merging with the table inside the loop. Similarly, ... the table outside the loop and merging with the table inside the loop, as shown in the figure.

4. Why did devotees walk around the stupa in a clockwise direction? -Social Science

Description : 4. Why did devotees walk around the stupa in a clockwise direction? -Social Science

Last Answer : They did so to show their devotion.

If pulley a turn clockwise at 15 rpm how fast and what direction will pulley b turn?

Description : If pulley a turn clockwise at 15 rpm how fast and what direction will pulley b turn?

Last Answer : A simple enough question, but complicated by so many possible variations. For instance, place two cog wheels together so that their teeth mesh. Turn cog A clockwise and cog B will turn anticlockwise ( ... of travel (RPM) would depends on the diametres of the pulley wheels - variations once more!

Which on of the following planets orbits around the sun in a clockwise direction? A. Earth B. Mercury C. Jupiter D. Venus (Answer)

Description : Which on of the following planets orbits around the sun in a clockwise direction? A. Earth B. Mercury C. Jupiter D. Venus (Answer)

Last Answer : D. Venus (Answer)

In hydrodynamic bearing, when the shaft begins to rotate in clockwise direction, (A) The journal climbs to the right side of the bearing without metal to metal contact (B) The journal climbs to the left side of the bearing without metal to metal contact (C) The journal sinks down to the bottom of the bearing (D) The journal is at the center of the bearing

Description : In hydrodynamic bearing, when the shaft begins to rotate in clockwise direction, (A) The journal climbs to the right side of the bearing without metal to metal contact (B) The journal climbs to the left ... sinks down to the bottom of the bearing (D) The journal is at the center of the bearing

Last Answer : (A) The journal climbs to the right side of the bearing without metal to metal contact

All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Description : All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Last Answer : in a direction that cannot be predicted but must be determined experimentally

In a Doppler VOR (DVOR) the reference signal is _____, the bearing signal is ______ and the direction of rotation of the bearing signal is ______. a. AM, FM, anti-clockwise b. AM, FM, clockwise c. FM, AM, anti-clockwise d. FM, AM, clockwise

Description : In a Doppler VOR (DVOR) the reference signal is _____, the bearing signal is ______ and the direction of rotation of the bearing signal is ______. a. AM, FM, anti-clockwise b. AM, FM, clockwise c. FM, AM, anti-clockwise d. FM, AM, clockwise

Last Answer : a. AM, FM, anti-clockwise

A proton beam moves towards an observer. The direction of magnetic induction is a) towards right b) anticlockwise c) towards left d) clockwise

Description : A proton beam moves towards an observer. The direction of magnetic induction is a) towards right b) anticlockwise c) towards left d) clockwise

Last Answer : d) clockwise

The air around a high pressure area circulates: w) clockwise in the Northern Hemisphere x) counterclockwise in the Northern Hemisphere y) clockwise in the Southern Hemisphere z) in either direction regardless of hemisphere

Description : The air around a high pressure area circulates: w) clockwise in the Northern Hemisphere x) counterclockwise in the Northern Hemisphere y) clockwise in the Southern Hemisphere z) in either direction regardless of hemisphere

Last Answer : ANSWER: W -- CLOCKWISE IN THE NORTHERN HEMISPHERE 

The direction of rotation of a 3-phase induction motor is clockwise when it is supplied with 3-phase sinusoidal

Description : The direction of rotation of a 3-phase induction motor is clockwise when it is supplied with 3-phase sinusoidal voltage having phase sequence A-B-C. For counter clockwise rotation of the motor, the phase sequence of the power supply should be  (A) B-C-A (B) C-A-B (C) A-C-B (D) B-C-A or C-A-B

Last Answer : The direction of rotation of a 3-phase induction motor is clockwise when it is supplied with 3-phase sinusoidal voltage having phase sequence A-B-C. For counter clockwise rotation of the motor, the phase sequence of the power supply should be  A-C-B 

If stator field is rotating in clockwise direction rotor rotates in

Description : If stator field is rotating in clockwise direction rotor rotates in (A) any direction (B) cannot predict (C) anticlockwise (D) clockwise 

Last Answer : If stator field is rotating in clockwise direction rotor rotates in clockwise 

The bearing of line AB is 152° 30' and angle ABC measured clockwise is 124° 28'. The bearing of BC is (A) 27° 52' (B) 96° 58' (C) 148° 08' (D) 186° 58'

Description : The bearing of line AB is 152° 30' and angle ABC measured clockwise is 124° 28'. The bearing of BC is (A) 27° 52' (B) 96° 58' (C) 148° 08' (D) 186° 58'

Last Answer : (B) 96° 58'

A bearing of a line is also known as (A) Magnetic bearing (B) True bearing (C) Azimuth (D) Reduced bearing

Description : A bearing of a line is also known as  (A) Magnetic bearing  (B) True bearing  (C) Azimuth  (D) Reduced bearing 

Last Answer : (B) True bearing