The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

The control routine necessary to keep the satellite in position is referred to as
A. station keeping
B. station tracking
C. station monitoring
D. station maintaining
by

1 Answer

Answer :

A. station keeping
by

Related questions

In satellite communications, what means of attitude control is using the angular momentum of the spinning body to provide the roll and yaw stabilization? A. Spin stabilization B. Radial stabilization C. Three-axis stabilization D. Station keeping

Description : In satellite communications, what means of attitude control is using the angular momentum of the spinning body to provide the roll and yaw stabilization? A. Spin stabilization B. Radial stabilization C. Three-axis stabilization D. Station keeping

Last Answer : A. Spin stabilization

The use of telecommunication for automatic indicating or recording measurement at the distance from the measuring instrument. A. Monitoring B. Tracking C. Telemetry D. Telecommand

Description : The use of telecommunication for automatic indicating or recording measurement at the distance from the measuring instrument. A. Monitoring B. Tracking C. Telemetry D. Telecommand

Last Answer : C. Telemetry

Routine maintenance of lead acid batteries should include _____________. A. keeping the terminals clean B. coating cable connections with petroleum jelly C. maintaining a trickle charge D. all of the above

Description : Routine maintenance of lead acid batteries should include _____________. A. keeping the terminals clean B. coating cable connections with petroleum jelly C. maintaining a trickle charge D. all of the above

Last Answer : Answer: D

The satellite subsystem that monitors and controls the satellite is the A. propulsion subsystem B. power subsystem C. communications subsystem D. telemetry, tracking, and command subsystem

Description : The satellite subsystem that monitors and controls the satellite is the A. propulsion subsystem B. power subsystem C. communications subsystem D. telemetry, tracking, and command subsystem

Last Answer : D. telemetry, tracking, and command subsystem

Type of antenna which is normally used for satellite tracking service. A. Omni B. Helical C. Yagi D. Dipole

Description : Type of antenna which is normally used for satellite tracking service. A. Omni B. Helical C. Yagi D. Dipole

Last Answer : B. Helical

A helical antenna is used for satellite tracking because of ______. A. Broad bandwidth B. Good front-to-back C. Maneuverability D. Circular polarization

Description : A helical antenna is used for satellite tracking because of ______. A. Broad bandwidth B. Good front-to-back C. Maneuverability D. Circular polarization

Last Answer : D. Circular polarization

Production of radiation by a radio transmitting station A. Monitoring B. Emission C. Radiation D. Transmission

Description : Production of radiation by a radio transmitting station A. Monitoring B. Emission C. Radiation D. Transmission

Last Answer : B. Emission

An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

In shipboard satellite dish antennas system, azimuth is referred as the _______. A. 0 to 90 degrees B. Vertical aiming of the antenna C. North to East D. Horizontal aiming of the antenna

Description : In shipboard satellite dish antennas system, azimuth is referred as the _______. A. 0 to 90 degrees B. Vertical aiming of the antenna C. North to East D. Horizontal aiming of the antenna

Last Answer : D. Horizontal aiming of the antenna

Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Description : Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Last Answer : C. Land station

This is referred to as a fixed radio station that broadcasts program material from studio to transmitter by radio link. A. Aural BC intercity relay B. Aural broadcast STL C. Shortwave station D. Remote-pickup

Description : This is referred to as a fixed radio station that broadcasts program material from studio to transmitter by radio link. A. Aural BC intercity relay B. Aural broadcast STL C. Shortwave station D. Remote-pickup

Last Answer : B. Aural broadcast STL

What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Description : What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Last Answer : A. 256 msec

Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Description : Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Last Answer : A. Communication satellite

The signal path from earth station satellite A. Uplink signal B. Reflected signal C. Incident signal D. Downlink signal

Description : The signal path from earth station satellite A. Uplink signal B. Reflected signal C. Incident signal D. Downlink signal

Last Answer : A. Uplink signal

What is the approximate path loss from satellite-to-earth station? A. 100 dB B. 150 dB C. 175 dB D. 200 dB

Description : What is the approximate path loss from satellite-to-earth station? A. 100 dB B. 150 dB C. 175 dB D. 200 dB

Last Answer : D. 200 dB

A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

Description : A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

Last Answer : B. Downlink

A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms

Description : A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms

Last Answer : B. 275 ms

What satellite system parameter represents the quality of a satellite or an earth station receiver? A. Gain-to-Equivalent Noise Temperature Ratio (G/Te) B. Energy of Bit-to-Noise Density Ratio (Eb/No) C. Carrier-to-Noise Density Ratio (C/No) D. Bit energy

Description : What satellite system parameter represents the quality of a satellite or an earth station receiver? A. Gain-to-Equivalent Noise Temperature Ratio (G/Te) B. Energy of Bit-to-Noise Density Ratio (Eb/No) C. Carrier-to-Noise Density Ratio (C/No) D. Bit energy

Last Answer : A. Gain-to-Equivalent Noise Temperature Ratio (G/Te)

What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder

Description : What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder

Last Answer : C. TTC

Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Description : Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Last Answer : B. Down link

Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station

Description : Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station

Last Answer : B. Space station

Satellite system or part of a satellite system, consisting of only one satellite and the operating earth station. A. Satellite system B. Satellite network C. Space system D. Multi-satellite link

Description : Satellite system or part of a satellite system, consisting of only one satellite and the operating earth station. A. Satellite system B. Satellite network C. Space system D. Multi-satellite link

Last Answer : B. Satellite network

A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Description : A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Last Answer : D. 5925 MHz

Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Description : Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Last Answer : C. Downlink

What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. Apply anti-static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

Description : What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. ... -static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

Last Answer : A. Apply shielding and filtering where necessary

Refers to the satellite orientation with respect to the earth A. Satellite altitude B. Satellite position C. Satellite location D. Satellite orbit

Description : Refers to the satellite orientation with respect to the earth A. Satellite altitude B. Satellite position C. Satellite location D. Satellite orbit

Last Answer : A. Satellite altitude

The ________ angle measures the satellite position clockwise from the direction of true north. A. azimuth B. elevation C. depression D. critical

Description : The ________ angle measures the satellite position clockwise from the direction of true north. A. azimuth B. elevation C. depression D. critical

Last Answer : A. azimuth

A satellite position is measured by its __________ angle with respect to the horizon. A. elevation B. depression C. azimuth D. critical

Description : A satellite position is measured by its __________ angle with respect to the horizon. A. elevation B. depression C. azimuth D. critical

Last Answer : A. elevation

The physical location of a satellite is determined by its A. distance from the earth B. latitude and longitude C. reference to the stars D. position relative to the sun

Description : The physical location of a satellite is determined by its A. distance from the earth B. latitude and longitude C. reference to the stars D. position relative to the sun

Last Answer : B. latitude and longitude

Useful steps to optimize systemic oxygen delivery include: a. Maintaining mean arterial blood pressure between 50 and 90 mm Hg b. Optimizing PEEP levels by monitoring mixed venous saturation c. Turning the patient prone d. Sedation or paralysis

Description : Useful steps to optimize systemic oxygen delivery include: a. Maintaining mean arterial blood pressure between 50 and 90 mm Hg b. Optimizing PEEP levels by monitoring mixed venous saturation c. Turning the patient prone d. Sedation or paralysis

Last Answer : Answer: a, b, c, d Optimizing systemic oxygen delivery in relationship to oxygen requirement is the primary goal of management. Improving oxygenation of the blood itself by ... sedation, and establishing muscular paralysis decrease oxygen consumption, and decrease the need for oxygen delivery

Maintaining or providing access to adequate reference libraries and other authoritative sources is a procedure that is most likely performed to comply with the policy of a. Monitoring b. Ethical requirements c. Assignment d. Consultation

Description : Maintaining or providing access to adequate reference libraries and other authoritative sources is a procedure that is most likely performed to comply with the policy of a. Monitoring b. Ethical requirements c. Assignment d. Consultation

Last Answer : Consultation

Which of the following is not the responsibility of the utilities component of DBMS software? A. creating the physical and logicaldesigns B. removingflaggedrecords for deletion C. creatingand maintaining the data dictionary D. monitoring performance E. None of the above

Description : Which of the following is not the responsibility of the utilities component of DBMS software? A. creating the physical and logicaldesigns B. removingflaggedrecords for deletion C. creatingand maintaining the data dictionary D. monitoring performance E. None of the above

Last Answer : creating the physical and logicaldesigns

Would better monitoring/tracking improve soccer?

Description : Would better monitoring/tracking improve soccer?

Last Answer : I mean it defiantly would help, but i dont think a referee would be able to change her/his call even if they had an instant re play. Also, the fun about soccer is that you fight with the opposing teams, and if all the calls were justified, that wouldn’t be any fun :D would it

What is the basic technique used to stabilize a satellite? A. Gravity-forward motion balance B. Spin C. Thruster control D. Solar panel orientation 62. The jet thrusters are usually

Description : What is the basic technique used to stabilize a satellite? A. Gravity-forward motion balance B. Spin C. Thruster control D. Solar panel orientation 62. The jet thrusters are usually

Last Answer : B. Spin

The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Description : The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Last Answer : D. transponder

Which of the following satellite subsystem provides stabilization in orbit and senses changes in orientation? A. Attitude control subsystem B. TTC C. AKM D. Transponder

Description : Which of the following satellite subsystem provides stabilization in orbit and senses changes in orientation? A. Attitude control subsystem B. TTC C. AKM D. Transponder

Last Answer : A. Attitude control subsystem

Which coaxial connector is a more complex and expensive but do a better job in maintaining the electrical characteristics of the cable through the interconnections? A. N-type connector B. F-type connector C.BNC D. PL-259

Description : Which coaxial connector is a more complex and expensive but do a better job in maintaining the electrical characteristics of the cable through the interconnections? A. N-type connector B. F-type connector C.BNC D. PL-259

Last Answer : A. N-type connector

____________ is measuring the propagated field strength over the projected service area A. Radio sounding B. None of these C. Radio monitoring D. Radio survey

Description : ____________ is measuring the propagated field strength over the projected service area A. Radio sounding B. None of these C. Radio monitoring D. Radio survey

Last Answer : D. Radio survey

The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. A. Tracking B. space command C. Telecommand D. Trunking

Description : The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. A. Tracking B. space command C. Telecommand D. Trunking

Last Answer : C. Telecommand

The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. A. Tracking B. Telemetry C. Telecommand D. Space telemetry

Description : The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. A. Tracking B. Telemetry C. Telecommand D. Space telemetry

Last Answer : C. Telecommand

Proper storage battery maintenance includes ____________. A. keeping connections tight and casing surfaces clean B. making sure electrolyte level is below the separator plates C. insulating the terminals with naval jelly D. maintaining a high charging rate at all times

Description : Proper storage battery maintenance includes ____________. A. keeping connections tight and casing surfaces clean B. making sure electrolyte level is below the separator plates C. insulating the terminals with naval jelly D. maintaining a high charging rate at all times

Last Answer : Answer: A

Which of the following is not project management goal? a) Keeping overall costs within budget b) Delivering the software to the customer at the agreed time c) Maintaining a happy and well-functioning development team

Description : Which of the following is not project management goal? a) Keeping overall costs within budget b) Delivering the software to the customer at the agreed time c) Maintaining a happy and well-functioning development team

Last Answer : d) Avoiding customer complaints

This set of Software Engineering Multiple Choice Questions & Answers (MCQs) focuses on “Project Management”. 1. Which of the following is not project management goal? a) Keeping overall costs within budget b) Delivering the software to the customer at the agreed time c) Maintaining a happy and well-functioning development team d) Avoiding customer complaints

Description : This set of Software Engineering Multiple Choice Questions & Answers (MCQs) focuses on Project  Management . 1. Which of the following is not project management goal? a) Keeping overall ... agreed time c) Maintaining a happy and well-functioning development team d) Avoiding customer complaints

Last Answer : d) Avoiding customer complaints

Which of the following is not project management goal? a) Keeping overall costs within budget. b) Delivering to the customer at the agreed time. c) Maintaining a happy and well-functioning development team. d) Avoiding costumer complaints.

Description : Which of the following is not project management goal? a) Keeping overall costs within budget. b) Delivering to the customer at the agreed time. c) Maintaining a happy and well-functioning development team. d) Avoiding costumer complaints.

Last Answer : d) Avoiding costumer complaints.

Which of the following generally cannot be done in qualitative studies conducted in the field? a. Getting informed consent b. Keeping participants from physical harm c. Maintaining consent forms d. Having full anonymity rather than just confidentiality

Description : Which of the following generally cannot be done in qualitative studies conducted in the field? a. Getting informed consent b. Keeping participants from physical harm c. Maintaining consent forms d. Having full anonymity rather than just confidentiality

Last Answer : d. Having full anonymity rather than just confidentiality

Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of dirt and conductive debris C. periodic testing of insulation resistance with a megger D. all of the above

Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above

Last Answer : Answer: D

Personal selling tries to achieve three general goals : finding prospects, convincing prospects to buy, and 1. monitoring new products being developed 2. being aware of competitors' sales activities 3. depending on one-sale customers 4. avoiding repeat sales 5. keeping customers satisfied

Description : Personal selling tries to achieve three general goals : finding prospects, convincing prospects to buy, and 1. monitoring new products being developed 2. being aware of competitors' sales activities 3. depending on one-sale customers 4. avoiding repeat sales 5. keeping customers satisfied

Last Answer : keeping customers satisfied

Marketing management is ________. A. Managing the marketing process B. Monitoring the profitability of the company’s products and services C. Selecting target markets D. Developing marketing strategies to move the company forward E. The art and science of choosing target markets and getting, keeping, and growing customers through creating, delivering, and communicating superior customer value

Description : Marketing management is ________. A. Managing the marketing process B. Monitoring the profitability of the company's products and services C. Selecting target markets D. Developing ... , keeping, and growing customers through creating, delivering, and communicating superior customer value

Last Answer : E. The art and science of choosing target markets and getting, keeping, and growing customers through creating, delivering, and communicating superior customer value

Personal selling tries to achieve three general goals: finding prospects, convincing prospects to buy, and A)monitoring new products being developed. B)being aware of competitors' sales activities. C)depending on one -sale customers. D)avoiding repeat sales. E)keeping customers satisfied.

Description : Personal selling tries to achieve three general goals: finding prospects, convincing prospects to buy, and A)monitoring new products being developed. B)being aware of competitors' sales activities. C)depending on one -sale customers. D)avoiding repeat sales. E)keeping customers satisfied.

Last Answer : E)keeping customers satisfied.