Description : Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect
Last Answer : ANS: A
Description : In case of sewer lines A. Water test is carried out to check water tightness of the joints B. Test for straightness is carried out with the help of a lamp and mirror C. Obstruction test is carried out with the help of smooth ball of diameter 13 mm D. All the above
Last Answer : ANS: D
Description : A safety lamp when inserted in the upper portion of a manhole causes flames. It indicates the presence of A. Carbondioxide gas B. Hydrogen sulphide gas C. Methane gas D. Petrol vapours
Last Answer : ANS: C
Description : If the flame of a miner’s safety lamp in a manhole extinguishes within 5 minutes, the sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen
Last Answer : ANS: B
Description : If a paper moistened with lead acetate for five minutes when placed in manhole turns black. The sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen
Description : Pick up the correct statement from the following: A. The boning rod is used for checking the levels of the sewer inverts B. Manhole covers are made circular for the convenience of the cleaning staff C. A manhole is classified as shallow manhole if its depth is less than 0.9 m D. All the above
Description : Lead acetate test in sewer manhole is done to test the presence of A. Methane gas B. Hydrogen sulphide C. Carbondioxide gas D. Diesel vapours
Description : Pick up the incorrect statement from the following for allowing workers to enter sewers A. The particular manhole and one manhole on upstream and one manhole on downstream should remain open for 30 ... entering the manhole should be advised to smoke in the sewer D. Warning signals should be erected
Description : The arrangement made for passing the sewer line below an obstruction below the hydraulic gradient lines called A. Inverted syphon B. Depressed sewer C. Sag pipe D. all of these
Description : The sewer which transports the sewage to the point of treatment, is called A. House sewer B. Out-fall sewer C. Branch sewer D. Main sewer
Description : The sewer that unloads the sewage at the point of treatment is called A. Main sewer B. Outfall sewer C. Branch sewer D. House sewer
Description : Drop manholes are the manholes A. Without entry ladders B. Without manhole covers C. With depths more than 3.5 m D. Having drains at different levels
Description : A manhole is generally provided at each A. Bend B. Junction C. Change of gradient D. All the above
Description : ‘Cowl’ is provided at A. Lower end of ventilating column B. Upper end of ventilating column C. Upper end of the manhole D. First step in manhole
Description : If the flame of a miner’s safety lamp in the upper layers of the sewer forms an explosive, the sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen
Description : The sewerage system consists of A. House sewer B. Lateral sewer C. Branch sewer D. All of these
Description : The sewer which collects the discharge from a collecting system and delivers it to a treatment plant, is known A. House sewer B. Lateral sewer C. Branch sewer D. Sewer outfall
Description : Sewer ventilating columns are generally placed at A. Distances 150 m to 300 m B. Upper ends of branch sewers C. Every change in the size of sewers D. All the above
Description : A sewer is laid from a manhole to a manhole , 250 m away along a gradient of 1 in 125. If the reduced level of the invert at is 205.75 m and the height of the boning rod is 3 m, the reduced level of the sight rail at , is (A) 208.75 m (B) 202.75 m (C) 206.75 m (D) 211.75 m
Last Answer : (C) 206.75 m
Description : Sewer manholes are generally provided at A. The change of gradient B. The change of direction C. The junctions of sewers D. All of these
Description : Ventilating shafts are provided to a sewer line at every A. 100 m B. 150 m C. 200 m D. 300 m
Description : Pick up the in-correct statement from the following: A. Manholes are provided in sewer pipes at suitable intervals B. Catch basins are generally provided in sewers for carrying drainage discharge C. Inlets are generally provided in all sewers D. None of these
Description : The trap which is provided to disconnect the house drain from the street sewer is called (A) Master trap (B) Intercepting trap (C) Interception manhole (D) All the above
Last Answer : (D) All the above
Description : A manhole is classified as shallow if its depth is between A. 0.4 to 0.5 m B. 0.5 to 0.7 m C. 0.7 to 0.9 m D. 0.9 to 1.20 m
Description : The sewer pipe which carries sewage from a building for immediate disposal is A. House sewer B. Lateral sewer C. Intercepting sewer D. Main sewer
Description : For a peak discharge of 0.0157 cumec, with a velocity of 0.9 m/sec, the diameter of the sewer main, is A. 10 cm B. 12 cm C. 15 cm D. 18 cm
Description : The sewer which received discharge from two or more main sewers, is known as A. A trunk sewer B. An outfall sewer C. A main sewer D. An intercepting sewer
Description : At the junction of sewers A. Top of smaller sewer is kept lower B. Top of larger sewer is kept lower C. Tops of both the sewers are at the same level D. None of these
Description : Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self ... carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills
Description : The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains
Description : Aerobic activity is maximum A. In freshly produced sewage B. At sewer pipes C. In sewer treatment plants D. None of these
Description : If the diameter of a sewer is 100 mm, the gradient required for generating self cleansing velocity is A. 1 in 60 B. 1 in 100 C. 1 in 120 D. None of these
Description : Sewer pipes need be checked for A. Minimum flow B. Maximum flow C. Both A. and B. D. None of these
Description : If is the diameter of upper circular portion, the area of cross-section of a standard egg shaped sewer, is A. D² B. D² C. D² D. D²
Description : If the depth of partial flow in a sewer of diameter 2 m, is 50 cm, its wetted perimeter is A. B. /2 C. /3 D. 2 /3
Description : The gradient of sewers depends upon A. Velocity of flow B. Diameter of the sewer C. Discharge D. All the above
Description : In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept A. 10.0 B. 5.0 C. 2.0 D. 0.25
Description : The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is A. 0.68 m B. 0.88 m C. 1.36 m D. 1.76 m
Description : Which one of the following tests is used for testing sewer pipes? A. Water test B. Ball test C. Mirror test D. All of these
Description : The angle subtended by the surface of sewer water with partial flow, at sewer centre is 120°, the depth of sewerage is A. 20 cm B. 25 cm C. 40 cm D. 50 cm
Description : If the diameter of sewer is 225 mm, the gradient required for generating self cleansing velocity, is A. 1 in 60 B. 1 in 100 C. 1 in 120 D. None of these
Description : The minimum diameter of sewer to be adopted is A. 10 cm B. 12.5 cm C. 15 cm D. 25 cm
Description : The porosity of sediments in sewer pipes, is usually taken as A. 0.010 B. 0.011 C. 0.012 D. 0.013
Description : Dry water flow in a combined sewer, is A. Industrial sewage B. Domestic sewage C. Storm water D. Inclusive of domestic and industrial sewage but excludes storm water
Description : Assertion A.: The minimum self cleansing velocity in the sewer, at least once a day, must be generated. Reason (R): If certain deposition takes place and is not removed, it obstructs free flow and causes further ... correct explanation of A C. A is true but R is false D. A is false but R is true
Description : If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by A. Chezy B. Manning C. Bazin D. Kutter
Description : You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at A. Full depth B. Half full C. Two third full D. Three fourth full
Description : For design purposes, the normal rate of infiltration of ground water into the sewer, is A. 500 litres/km/cm B. 1000 litres/km/cm C. 1500 litres/km/cm D. 2000 litres/km/cm
Description : A rain sanitary sewer is constructed to carry A. Sanitary sewage B. Storm sewage C. Surface water D. Ground water
Description : For sewer mains of 0.5 to 1 m diameter, the ratio of maximum daily sewage flow to the average daily sewage flow is assumed A. 1.5 B. 2.0 C. 2.5 D. 3.0