Drop manholes are the manholes A. Without entry ladders B. Without manhole covers C. With depths more than 3.5 m D. Having drains at different levels

Drop manholes are the manholes A. Without entry ladders B. Without manhole covers C. With depths more than 3.5 m D. Having drains at different levels
by

1 Answer

Answer :

ANS: D
by
selected

Related questions

Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Description : Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Last Answer : ANS: A

Pick up the correct statement from the following: A. The boning rod is used for checking the levels of the sewer inverts B. Manhole covers are made circular for the convenience of the cleaning staff C. A manhole is classified as shallow manhole if its depth is less than 0.9 m D. All the above

Description : Pick up the correct statement from the following: A. The boning rod is used for checking the levels of the sewer inverts B. Manhole covers are made circular for the convenience of the cleaning staff C. A manhole is classified as shallow manhole if its depth is less than 0.9 m D. All the above

Last Answer : ANS: D

A drop manhole is provided if A. A sewer drops from a height B. A branch sewer joins the main sewer at higher level C. A lamp is inserted to check obstruction D. None of these

Description : A drop manhole is provided if A. A sewer drops from a height B. A branch sewer joins the main sewer at higher level C. A lamp is inserted to check obstruction D. None of these

Last Answer : ANS: B

The maximum spacing of manholes specified by Indian standard in sewers upto 0.3 m diameter is A. 20 m B. 30 m C. 45 m D. 75 m

Description : The maximum spacing of manholes specified by Indian standard in sewers upto 0.3 m diameter is A. 20 m B. 30 m C. 45 m D. 75 m

Last Answer : ANS: C

For large sewers, maximum distance between manholes may be A. 50 m B. 100 m C. 200 m D. 300 m

Description : For large sewers, maximum distance between manholes may be A. 50 m B. 100 m C. 200 m D. 300 m

Last Answer : ANS: D

A manhole is classified as shallow if its depth is between A. 0.4 to 0.5 m B. 0.5 to 0.7 m C. 0.7 to 0.9 m D. 0.9 to 1.20 m

Description : A manhole is classified as shallow if its depth is between A. 0.4 to 0.5 m B. 0.5 to 0.7 m C. 0.7 to 0.9 m D. 0.9 to 1.20 m

Last Answer : ANS: C

Sewer manholes are generally provided at A. The change of gradient B. The change of direction C. The junctions of sewers D. All of these

Description : Sewer manholes are generally provided at A. The change of gradient B. The change of direction C. The junctions of sewers D. All of these

Last Answer : ANS: D

Antisyphonage pipe is fitted A. At the end of septic tanks B. On manholes C. With a W.C. trap D. At the beginning of sewer line

Description : Antisyphonage pipe is fitted A. At the end of septic tanks B. On manholes C. With a W.C. trap D. At the beginning of sewer line

Last Answer : ANS: C

Pick up the in-correct statement from the following: A. Manholes are provided in sewer pipes at suitable intervals B. Catch basins are generally provided in sewers for carrying drainage discharge C. Inlets are generally provided in all sewers D. None of these

Description : Pick up the in-correct statement from the following: A. Manholes are provided in sewer pipes at suitable intervals B. Catch basins are generally provided in sewers for carrying drainage discharge C. Inlets are generally provided in all sewers D. None of these

Last Answer : ANS: C

Maximum permissible velocity 1.5 m/sec, is adopted in drains A. With beds of rocks and gravels B. Lined with stones C. Both A. and B. D. Neither A. nor B.

Description : Maximum permissible velocity 1.5 m/sec, is adopted in drains A. With beds of rocks and gravels B. Lined with stones C. Both A. and B. D. Neither A. nor B.

Last Answer : ANS: C

If the flame of a miner’s safety lamp in a manhole extinguishes within 5 minutes, the sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen

Description : If the flame of a miner’s safety lamp in a manhole extinguishes within 5 minutes, the sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen

Last Answer : ANS: B

If a paper moistened with lead acetate for five minutes when placed in manhole turns black. The sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen

Description : If a paper moistened with lead acetate for five minutes when placed in manhole turns black. The sewer certainly contains A. Hydrogen sulphide B. Carbon dioxide C. Methane D. Oxygen

Last Answer : ANS: A

The ratio of depths at partial flo A. 1 – B. 1 – C. ½ (1 – D. ½ (1 –

Description : The ratio of depths at partial flo A. 1 – B. 1 – C. ½ (1 – D. ½ (1 –

Last Answer : ANS: C

A safety lamp when inserted in the upper portion of a manhole causes flames. It indicates the presence of A. Carbondioxide gas B. Hydrogen sulphide gas C. Methane gas D. Petrol vapours

Description : A safety lamp when inserted in the upper portion of a manhole causes flames. It indicates the presence of A. Carbondioxide gas B. Hydrogen sulphide gas C. Methane gas D. Petrol vapours

Last Answer : ANS: C

A manhole is generally provided at each A. Bend B. Junction C. Change of gradient D. All the above

Description : A manhole is generally provided at each A. Bend B. Junction C. Change of gradient D. All the above

Last Answer : ANS: D

Lead acetate test in sewer manhole is done to test the presence of A. Methane gas B. Hydrogen sulphide C. Carbondioxide gas D. Diesel vapours

Description : Lead acetate test in sewer manhole is done to test the presence of A. Methane gas B. Hydrogen sulphide C. Carbondioxide gas D. Diesel vapours

Last Answer : ANS: B

‘Cowl’ is provided at A. Lower end of ventilating column B. Upper end of ventilating column C. Upper end of the manhole D. First step in manhole

Description : ‘Cowl’ is provided at A. Lower end of ventilating column B. Upper end of ventilating column C. Upper end of the manhole D. First step in manhole

Last Answer : ANS: B

Pick up the incorrect statement from the following for allowing workers to enter sewers A. The particular manhole and one manhole on upstream and one manhole on downstream should remain open for 30 minutes B. Proper tests for the presence of poisonous gases must be carried out C. The men entering the manhole should be advised to smoke in the sewer D. Warning signals should be erected

Description : Pick up the incorrect statement from the following for allowing workers to enter sewers A. The particular manhole and one manhole on upstream and one manhole on downstream should remain open for 30 ... entering the manhole should be advised to smoke in the sewer D. Warning signals should be erected

Last Answer : ANS: C

15 cumecs, the depth d and width are related by For drains up to A. d = 0.2 B B. d = 0.5 B C. B = 0.2 d D. B = 0.5 d

Description : 15 cumecs, the depth d and width are related by For drains up to A. d = 0.2 B B. d = 0.5 B C. B = 0.2 d D. B = 0.5 d

Last Answer : ANS: B

Self-cleansing velocity is A. Velocity at dry weather flow B. Velocity of water at flushing C. Velocity at which no accumulation remains in the drains D. Velocity of water in a pressure filter

Description : Self-cleansing velocity is A. Velocity at dry weather flow B. Velocity of water at flushing C. Velocity at which no accumulation remains in the drains D. Velocity of water in a pressure filter

Last Answer : ANS: C

The reduced levels of the string at the consecutive sight rails A and B are 203.575 m, 203.475 m respectively. If the difference of their R.D.s is 10 m, the gradient of the sewer line is A. 1 in 100 upward B. 1 in 500 upward C. 1 in 100 downward D. 1 in 503 upward

Description : The reduced levels of the string at the consecutive sight rails A and B are 203.575 m, 203.475 m respectively. If the difference of their R.D.s is 10 m, the gradient of the sewer line is A. 1 in 100 upward B. 1 in 500 upward C. 1 in 100 downward D. 1 in 503 upward

Last Answer : ANS: C

The manholes covers are generally round.

Description : The manholes covers are generally round.

Last Answer : It is impossible to drop a round lid into a smaller round hole. It is because round is the only shape that if turned or flipped over, it still retains the same length across its center. If you used ... it on its edge. A round cover contains less metal than a same-sized cover of any other shape.

Traps A. Are water seals which prevent the entry of foul gases B. Are used to trap the rats entering sewers C. Dissolve the foul gases D. Create symphonic action to increase the quick disposal of sewerage

Description : Traps A. Are water seals which prevent the entry of foul gases B. Are used to trap the rats entering sewers C. Dissolve the foul gases D. Create symphonic action to increase the quick disposal of sewerage

Last Answer : ANS: A

The ratio of maximum sewage flow to average sewage flow for trunk mains having diameters more than 1.25 m, is A. 1.5 B. 2.0 C. 3.0 D. 4.0

Description : The ratio of maximum sewage flow to average sewage flow for trunk mains having diameters more than 1.25 m, is A. 1.5 B. 2.0 C. 3.0 D. 4.0

Last Answer : ANS: A

The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains

Description : The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains

Last Answer : ANS: C

Why do some towns and cities spend the money to have their names and logos put on their manhole covers?

Description : Why do some towns and cities spend the money to have their names and logos put on their manhole covers?

Last Answer : I think it might reduce theft. It they are well labelled thieves cannot take them to a scrap dealer without being caught. Since manhole covers are cast, not machined, it is actually quite cheap to have a custom design imprinted.

Why doesn't snow accumulate on manhole covers?

Description : Why doesn't snow accumulate on manhole covers?

Last Answer : Manhole covers tend to be warmer because of the air from the sewer pipes also being warm. I assume sewer pipes are heated or at least insulated, because they can't get cold enough to let their ... heat does, and cause the manhole cover to become warmer, thus melting any snow that lies on it.

What do the numbers in the octagons in Japanese manhole covers mean?

Description : What do the numbers in the octagons in Japanese manhole covers mean?

Last Answer : I think it might be a Tokyo thing. Each region of Japan seems to have their own thing for man-hole covers. have a look here for more info awesome :)

The manhole covers are generally round.

Description : The manhole covers are generally round.

Last Answer : Ans: Manholes, which interconnect underground sewerage pipes, and serve as a point of entry for cleaning the pipes, are located at every major sewer pipe junction, and are capped with round ... with these other shapes, thus remaining in place despite the street traffic running roughshod over them.

The manhole covers are generally round.

Description : The manhole covers are generally round.

Last Answer : 1- Because generally, the drain pipes are round and it is easy to connect through them in this way. 2- The weight is distributed at every angle evenly, So it is easy to lift them off from any corner.

A cylindrical ejector having its height 2 m fills after every 10 minutes with a peak sewage discharge of 0.0157 cumec. The diameter of the ejector chamber, is A. 2.30 m B. 2.40 m C. 2.45 m D. 2.50 m

Description : A cylindrical ejector having its height 2 m fills after every 10 minutes with a peak sewage discharge of 0.0157 cumec. The diameter of the ejector chamber, is A. 2.30 m B. 2.40 m C. 2.45 m D. 2.50 m

Last Answer : ANS: C

Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of 30 m to 60 m along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Description : Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of ... along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Last Answer : ANS: D

Which of the following rivers of the Indian sub-continent covers the longest distance from its source to the sea into which it drains? (a) Indus (b) Godavari (c) Ganga (d) Brahmaputra

Description : Which of the following rivers of the Indian sub-continent covers the longest distance from its source to the sea into which it drains? (a) Indus (b) Godavari (c) Ganga (d) Brahmaputra

Last Answer : Ans: (c)

For trunk sewers more than 1.25 m in diameter, the ratio of the maximum daily sewage flow to the average daily sewage flow is assumed A. 1.5 B. 2.0 C. 2.5 D. 3.0

Description : For trunk sewers more than 1.25 m in diameter, the ratio of the maximum daily sewage flow to the average daily sewage flow is assumed A. 1.5 B. 2.0 C. 2.5 D. 3.0

Last Answer : ANS: A

Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) The earth work in trenches or borrow pits in irregular ground is measured by taking the difference in levels before and after completion of work (C) The earth work in trenches or borrow pits, where neither a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Last Answer : (D) All the above

In sewers the velocity of flow should not be A. More than the self-cleansing velocity B. Less than the self-cleansing velocity C. Less than 10 m/sec D. More than 20 m/sec

Description : In sewers the velocity of flow should not be A. More than the self-cleansing velocity B. Less than the self-cleansing velocity C. Less than 10 m/sec D. More than 20 m/sec

Last Answer : ANS: B

The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Description : The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Last Answer : ANS: D

Pick up the correct statement from the following: A. The sewer pipes of sizes less than 0.4 m diameter are designed as running full at maximum discharge B. The sewer pipes of sizes greater than 0.4 m diameter are designed as running 2/3rd or 3/4th full at maximum discharge C. The minimum design velocity of sewer pipes is taken as 0.8 m/sec D. All the above

Description : Pick up the correct statement from the following: A. The sewer pipes of sizes less than 0.4 m diameter are designed as running full at maximum discharge B. The sewer pipes of sizes greater than 0.4 m ... discharge C. The minimum design velocity of sewer pipes is taken as 0.8 m/sec D. All the above

Last Answer : ANS: D

The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is A. 0.68 m B. 0.88 m C. 1.36 m D. 1.76 m

Description : The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is A. 0.68 m B. 0.88 m C. 1.36 m D. 1.76 m

Last Answer : ANS: C

For sewer mains of 0.5 to 1 m diameter, the ratio of maximum daily sewage flow to the average daily sewage flow is assumed A. 1.5 B. 2.0 C. 2.5 D. 3.0

Description : For sewer mains of 0.5 to 1 m diameter, the ratio of maximum daily sewage flow to the average daily sewage flow is assumed A. 1.5 B. 2.0 C. 2.5 D. 3.0

Last Answer : ANS: B

221 For non-scouring velocity 5 m/sec, the type of sewers generally preferred to, is A. Cast iron sewers B. Cement concrete sewers C. Glazed bricks sewers D. Stone ware sewers

Description : 221 For non-scouring velocity 5 m/sec, the type of sewers generally preferred to, is A. Cast iron sewers B. Cement concrete sewers C. Glazed bricks sewers D. Stone ware sewers

Last Answer : ANS: C

The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is A. 5 m B. 5.5 m C. 6.5 m D. 7 m

Description : The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is A. 5 m B. 5.5 m C. 6.5 m D. 7 m

Last Answer : ANS: D

A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Description : A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Last Answer : ANS: D

If the over land flow from the critical point to the drain is 8 km and the difference in level is 12.4 m, the inlet time is A. 2 hours B. 3 hours C. 4 hours D. 5 hours

Description : If the over land flow from the critical point to the drain is 8 km and the difference in level is 12.4 m, the inlet time is A. 2 hours B. 3 hours C. 4 hours D. 5 hours

Last Answer : ANS: C

The spacing of man holes along a straight portion of a sewer is 300 m, the diameter of the sewer may be A. 0.9 cm B. 1.2 m C. 1.5 m D. > 1.5 m

Description : The spacing of man holes along a straight portion of a sewer is 300 m, the diameter of the sewer may be A. 0.9 cm B. 1.2 m C. 1.5 m D. > 1.5 m

Last Answer : ANS: D

The maximum depth of sedimentation tanks, is kept A. 3 m B. 3.5 m C. 4 m D. 4.5 m

Description : The maximum depth of sedimentation tanks, is kept A. 3 m B. 3.5 m C. 4 m D. 4.5 m

Last Answer : ANS: A

The ratio of maximum sewage flow to average sewage flow for mains up to 1 m in diameter, is A. 1.5 B. 2.0 C. 3.0 D. 4.0

Description : The ratio of maximum sewage flow to average sewage flow for mains up to 1 m in diameter, is A. 1.5 B. 2.0 C. 3.0 D. 4.0

Last Answer : ANS: B

Cement concrete sewers are only suitable if non-scouring velocity is between A. 2.5 to 3.0 m/sec B. 3.0 to 4.0 m/sec C. 3.5 to 4.5 m/sec D. 4.5 to 5.5 m/sec

Description : Cement concrete sewers are only suitable if non-scouring velocity is between A. 2.5 to 3.0 m/sec B. 3.0 to 4.0 m/sec C. 3.5 to 4.5 m/sec D. 4.5 to 5.5 m/sec

Last Answer : ANS: A

In septic tanks, A. Free board of 0.3 m may be provided B. The baffles or tees are extended up to top level of scum C. The clear space between the baffle top and covering slab is about 7.5 cm D. All the above

Description : In septic tanks, A. Free board of 0.3 m may be provided B. The baffles or tees are extended up to top level of scum C. The clear space between the baffle top and covering slab is about 7.5 cm D. All the above

Last Answer : ANS: D

For a continuous flow type of sedimentation tanks A. Width of the tank is normally kept about 6 m B. Length of the tank is normally kept 4 to 5 times the width C. Maximum horizontal flow velocity is limited to 0.3 m/minute D. All the above

Description : For a continuous flow type of sedimentation tanks A. Width of the tank is normally kept about 6 m B. Length of the tank is normally kept 4 to 5 times the width C. Maximum horizontal flow velocity is limited to 0.3 m/minute D. All the above

Last Answer : ANS: D