Pressure, applied in sprinkler irrigation system

1 Answer

Answer :

Ans.>2.5 bar

Related questions

Description : The saving of water in sprinkler and drip irrigation methods as compared to surface irrigation methods

Last Answer : Ans.25-50%and 50-70%water, respectively.

Description : Micro irrigation method, in which water is applied as drop form through emitters

Last Answer : Ans.Drip method

Description : Micro irrigation method, in which water is applied as spray

Last Answer : Ans.Sprinkler method

Description : Irrigation is applied to the crop at

Last Answer : Ans.50%soil moisture depletion stage

Description : The percentage of applied irrigation water stored in the soil and made available for consumptive use by the crop

Last Answer : Ans.Irrigation Efficiency

Description : The rate of water delivery in sprinkler system is

Last Answer : Ans.>1000 litre/hrs.

Description : Which of the following irrigation systems is also termed as ON & OFF Irrigation System [a] Drip Irrigation [b] Sprinkler Irrigation [c] Surge irrigation [d] Furrow Irrigation [e] None of the above

Last Answer : [c] Surge irrigation

Description : ________ method useful for watering plants having acute water shortage and in this method water falls drop – by –drop near the roots through narrow pipes . a) sprinkler system b)drip irrigation c)water logging d)weeding

Last Answer : b)drip irrigation

Description : Draw layout of sprinkler irrigation system showing various components on it

Last Answer : layout of sprinkler irrigation system showing various components on it 

Description : Irrigation project covered < 2,000 ha of CCA

Last Answer : Ans.Minor irrigation project

Description : Irrigation project covered 2,000 to 10,000 ha of CCA

Last Answer : Ans.Medium irrigation project

Description : Irrigation project covered >10,000 ha of catchments command area (CCA)

Last Answer : Ans.Major irrigation project

Description : Salt content in irrigation water evaluated as best quality

Last Answer : Ans.0.2 to 0.5 g/lt

Description : The ratio of the crop yield to the total amount of water used for irrigation is called, measured in kg/ha-cm is

Last Answer : Ans.Water use efficiency

Description : What will be CPE value when irrigation is scheduled at 0.8 IW/CPE with 6.0 cm depth of irrigation water?

Last Answer : Ans.7.5 cm or 75 mm

Description : The quantity of water needed for normal crop growth and yield in a period of time to a place and may be supplied by precipitation or by irrigation or by both.

Last Answer : Ans.Water requirement of a crop

Description : Which irrigation method has highest irrigation efficiency?

Last Answer : Ans.Drip method

Description : Drip Irrigation method is also known as

Last Answer : Ans.Trickle irrigation

Description : Drip Irrigation is discovered at

Last Answer : Ans.Israel

Description : Irrigation method, suitable for undulating land, sandy soils and Vegetable and fruit crops

Last Answer : Ans.Sprinkler method

Description : Most common method of surface irrigation to irrigate groundnut and pulses

Last Answer : Ans.Check basin

Description : Irrigation method suitable for lowland rice and jute

Last Answer : Ans.Flooding

Description : Volume or quantity of water required for irrigation to bring a crop to maturity

Last Answer : Ans.Duty of water

Description : Life saving irrigation is also known as

Last Answer : Ans.Contingency irrigation

Description : Horizontal flow of water in irrigation channels or through canals is known as

Last Answer : Ans.Seepage

Description : Most critical stages for irrigation of tobacco is

Last Answer : Ans.Topping

Description : Most critical stage for irrigation in potato is

Last Answer : Ans.25%tuber formation stage

Description : The most critical stage of sugarcane for irrigation is

Last Answer : Ans.Formative stage (60-130 days after planting)

Description : The critical stages for irrigation in Rapseed and mustard are

Last Answer : Ans.Rosette stage and Siliqua formation stage 16. Safflower

Description : The most suitable irrigation method for groundnut

Last Answer : Ans.Check basin method

Description : The main critical stage of groundnut for irrigation

Last Answer : Ans.Flowering stage, Pegging stage and Pod formation stage

Description : Critical stage for irrigation in barley

Last Answer : Ans.Active Tiplering Stage (30–35 DAS)

Description : The most critical stages for irrigation in maize

Last Answer : Ans.Silking stage.

Description : The most important critical stage of rice for irrigation

Last Answer : Ans.Tillering to flowering stage

Description : State any two advantages of using sprinkler irrigation. -Geography

Last Answer : In Sprinkler Irrigation as water is supplied by means of pipes no water is lost by seepage and also there is no scope for loss of water by evaporation due to direct watering on the fields.

Description : Give one geographical reason for each of the following : 1. Sprinkler irrigation is practiced in arid and semi-arid regions. -Geography

Last Answer : 1. To minimize the loss of water. 2. So that there is demand for irrigation and the cost involved in the construction and operation of the tube well can be recovered by the increased farm ... so digging is easy Deep fertile soil which helps in recovering the cost of construction of canals.

Description : Which of the following is the advantage of sprinkler irrigation? a. No loss of water by seepage b. No loss of water by evaporation c. Options a and b d. Only option b

Last Answer : c. Options a and b

Description : Most advanced and efficient method of irrigation consisting of perforated pipes. (a) Sprinkler irrigation. (b) Drip irrigation. (c) Spray irrigation. (d) Furrow irrigation.

Last Answer : (b) Drip irrigation

Description : Most common method of irrigation in India is (A) Border irrigation (B) Check basin irrigation (C) Sprinkler irrigation (D) Drip irrigation

Last Answer : (B) Check basin irrigation

Description : Sprinkler irrigation is suitable, where the soil has— (A) Clayey texture (B) Loamy texture (C) Undulating topography (D) All of these

Last Answer : (D) All of these

Description : Method of irrigation is— (A) Surface irrigation (B) Sprinkler irrigation (C) Drip irrigation (D) Sub-surface irrigation (E) All of these

Last Answer : (E) All of these

Description : Water use efficiency is the highest is case of– a) Border irrigation b) Drip irrigation c) Sprinkler irrigation d) Flood irrigation

Last Answer : b) Drip irrigation

Description : Under Sprinkler Irrigation what is the Land Saving Percent? [a] 5-11% [b] 10-16% [c] 17-22% [d] 23-30% [e] 35-42%

Last Answer : [b] 10-16%

Description : Water use efficiency is highest in the case of? a. Border irrigation b. Drip irrigation c. Sprinkler irrigation d. Flood irrigation e. None of these

Last Answer : b. Drip irrigation

Description : Water use efficiency is the highest is case of– a) Border irrigation b) Drip irrigation c) Sprinkler irrigation d) Flood irrigation

Last Answer : b) Drip irrigation

Description : In case of cereal crops, the irrigation is generally done by a. Check method b. Furrow method c. Sprinkler method d. Border method

Last Answer : a. Check method

Description : Highest water application efficiency is in — Flood irrigation a. Basin irrigation b. Drip Irrigation c. Sprinkler Irrigation

Last Answer : b. Drip Irrigation

Description : The herbicides applied 30-40 DAS are comes under

Last Answer : Ans.Post-emergence herbicides.

Description : The herbicides applied 1-4 days after sowing are comes under

Last Answer : Ans.Pre-emergence herbicides.

Description : The herbicides applied 1 day before sowing/planting or just are comes under

Last Answer : Ans.Pre-plant incorporated (PPI) herbicides.