Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any attributes of their own. How many minimum number of tables are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any attributes of their own. How many minimum number of tables are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1
by

1 Answer

Answer :

(B) 3 
by

Related questions

Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to represent M, N, R1 and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Description : Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to ... and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Last Answer : Answer: 4

Consider the following ER diagram: Image The minimum number of tables required to represent M, N, P, R1, R2 is (A) 2 (B) 3 (C) 4 (D) 5

Description : Consider the following ER diagram:  The minimum number of tables required to represent M, N, P, R1, R2 is (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : (A) 2 

In a relational model, relations are termed as (A) Tuples. (B) Attributes (C) Tables. (D) Rows.

Description : In a relational model, relations are termed as (A) Tuples. (B) Attributes (C) Tables. (D) Rows.

Last Answer : (C) Tables

In the relational modes, cardinality is termed as: (A) Number of tuples. (B) Number of attributes. (C) Number of tables. (D) Number of constraints

Description : In the relational modes, cardinality is termed as: (A) Number of tuples. (B) Number of attributes. (C) Number of tables. (D) Number of constraints

Last Answer : (A) Number of tuples

Let pk(R) denotes primary key of relation R. A many-to-one relationship that exists between two relations R1 and R2 can be expressed as follows: (1) pk(R2)→pk(R1) (2) pk(R1)→pk(R2) (3) pk(R2)→R1∩R2 (4) pk(R1)→R1∩R2

Description : Let pk(R) denotes primary key of relation R. A many-to-one relationship that exists between two relations R1 and R2 can be expressed as follows: (1) pk(R2)→pk(R1) (2) pk(R1)→pk(R2) (3) pk(R2)→R1∩R2 (4) pk(R1)→R1∩R2

Last Answer : Answer: 2

_____ produces the relation that has attributes of R1 and R2 (A) Cartesian product (B) Difference (C) Intersection (D) Product

Description : _____ produces the relation that has attributes of R1 and R2 (A) Cartesian product (B) Difference (C) Intersection (D) Product

Last Answer : A) Cartesian product

An ER Model includes I. An ER diagram portraying entity types. II. Attributes for each entity type III. Relationships among entity types. IV. Semantic integrity constraints that reflects the business rules about data not captured in the ER diagram. (A) I, II, III & IV (B) I&IV (C) I, II & IV (D) I & III

Description : An ER Model includes I. An ER diagram portraying entity types. II. Attributes for each entity type III. Relationships among entity types. IV. Semantic integrity constraints that reflects the business rules about data not ... ; IV (B) I&IV (C) I, II & IV (D) I & III

Last Answer : (A) I, II, III & IV

Which of the following statements is TRUE? D1: The decomposition of the schema R(A,B,C) into R1(A,B) and R2(A,C) is always lossless. D2: The decomposition of the schema R(A,B,C,D,E) having AD→B, C→DE, B→AE, AE→C into R1(A,B,D) and R2(A,C,D,E) is lossless. (A) Both D1 and D2 (B) Neither D1 and D2 (C) Only D1 (D) Only D2

Description : Which of the following statements is TRUE? D1: The decomposition of the schema R(A,B,C) into R1(A,B) and R2(A,C) is always lossless. D2: The decomposition of the schema R(A,B,C,D,E) having AD→B, C→DE, B→AE, AE→C ... ,D,E) is lossless. (A) Both D1 and D2 (B) Neither D1 and D2 (C) Only D1 (D) Only D2

Last Answer : (D) Only D2

The relational model is based on the concept that data is organized and stored in two-dimensional tables called ………………………A) Fields B) Records C) Relations D) Keys

Description : The relational model is based on the concept that data is organized and stored in two-dimensional tables called ………………………A) Fields B) Records C) Relations D) Keys

Last Answer : C) Relations

A ………………. Does not have a distinguishing attribute if its own and mostly are dependent entities, which are part of some another entity. A) Weak entity B) Strong entity C) Non attributes entity D) Dependent entity

Description : A ………………. Does not have a distinguishing attribute if its own and mostly are dependent entities, which are part of some another entity. A) Weak entity B) Strong entity C) Non attributes entity D) Dependent entity

Last Answer : A) Weak entity

The relation schemas R1 and R2 form a Lossless join decomposition of R if and only if: (a) R1⋂R2→(R1-R2) (b) R1→R2 (c) R1⋂R2→(R2-R1) (d) R2→R1⋂R2 (A) (a) and (b) happens (B) (a) and (d) happens (C) (a) and (c) happens (D) (b) and (c) happens

Description : The relation schemas R1 and R2 form a Lossless join decomposition of R if and only if: (a) R1⋂R2→(R1-R2) (b) R1→R2 (c) R1⋂R2→(R2-R1) (d) R2→R1⋂R2 (A) (a) and (b) happens (B) (a) and (d) happens (C) (a) and (c) happens (D) (b) and (c) happens

Last Answer : (C) (a) and (c) happens 

Consider a schema R(MNPQ) and functional dependencies M→N, P→Q. Then the decomposition of R into R1(MN) and R2(PQ) is ............. (1) Dependency preserving but not lossless join. (2) Dependency preserving and lossless join (3) Lossless join but not dependency preserving (4) Neither dependency preserving nor lossless join.

Description : Consider a schema R(MNPQ) and functional dependencies M→N, P→Q. Then the decomposition of R into R1(MN) and R2(PQ) is ............. (1) Dependency preserving but not lossless ... and lossless join (3) Lossless join but not dependency preserving (4) Neither dependency preserving nor lossless join. 

Last Answer : Answer: 1

Which of the following statements is FALSE about weak entity set ? (A) Weak entities can be deleted automatically when their strong entity is deleted. (B) Weak entity set avoids the data duplication and consequent possible inconsistencies caused by duplicating the key of the strong entity. (C) A weak entity set has no primary keys unless attributes of the strong entity set on which it depends are included. (D) Tuples in a weak entity set are not partitioned according to their relationship with tuples in a strong entity set.

Description : Which of the following statements is FALSE about weak entity set ? (A) Weak entities can be deleted automatically when their strong entity is deleted. (B) Weak entity set avoids the data ... weak entity set are not partitioned according to their relationship with tuples in a strong entity set.

Last Answer : (D) Tuples in a weak entity set are not partitioned according to their relationship with tuples in a strong entity set.

In mapping of ERD to DFD a) entities in ERD should correspond to an existing entity/store in DFD b) entity in DFD is converted to attributes of an entity in ERD c) relations in ERD has 1 to 1 correspondence to processes in DFD d) relationships in ERD has 1 to 1 correspondence to flows in DFD

Description : In mapping of ERD to DFD a) entities in ERD should correspond to an existing entity/store in DFD b) entity in DFD is converted to attributes of an entity in ERD c) relations in ERD has 1 to 1 correspondence to processes in DFD d) relationships in ERD has 1 to 1 correspondence to flows in DFD

Last Answer : a) entities in ERD should correspond to an existing entity/store in DFD

As shown in the illustration, what maintenance would be required of the circuit components? EL-0058 A. Change out both 'C' units monthly. B. Clean the glass surrounding 'E1' & 'E2' as needed. C. File the points at the upper end of 'G' every six months. D. Take megger readings on 'E1' & 'E2' windings quarterly.

Description : As shown in the illustration, what maintenance would be required of the circuit components? EL-0058 A. Change out both 'C' units monthly. B. Clean the glass surrounding 'E1' & 'E2' as needed. C. File ... upper end of 'G' every six months. D. Take megger readings on 'E1' & 'E2' windings quarterly.

Last Answer : Answer: B

In RDBMS, Data is presented as a collection of ............ A) Table B) Attributes C) Relations D) Entities

Description : In RDBMS, Data is presented as a collection of ............ A) Table B) Attributes C) Relations D) Entities

Last Answer : C) Relations

Consider following schedules involving two transactions: S1: r1(X); r1(Y); r2(X); r2(Y); w2(Y); w1(X) S2: r1(X); r2(X); r2(Y); w2(Y); r1(Y); w1(X) Which of the following statement is true? (1) Both S1 and S2 are conflict serializable. (2) S1 is conflict serializable and S2 is not conflict serializable. (3) S1 is not conflict serializable and S2 is conflict serializable. (4) Both S1 and S2 are not conflict serializable.

Description : Consider following schedules involving two transactions: S1: r1(X); r1(Y); r2(X); r2(Y); w2(Y); w1(X) S2: r1(X); r2(X); r2(Y); w2(Y); r1(Y); w1(X) Which of the following ... . (3) S1 is not conflict serializable and S2 is conflict serializable. (4) Both S1 and S2 are not conflict serializable.

Last Answer : S1 is not conflict serializable and S2 is conflict serializable.

Suppose that R1 and R2 are reflexive relations on a set A. Which of the following statements is correct? (A) R1∩R2 is reflexive and R1UR2 is irreflexive. (B) R1∩R2 is irreflexive and R1UR2 is reflexive. (C) Both R1∩R2 and R1UR2 are reflexive. (D) Both R1∩R2 and R1UR2 are irreflexive.

Description : Suppose that R1 and R2 are reflexive relations on a set A. Which of the following statements is correct? (A) R1∩R2 is reflexive and R1UR2 is irreflexive. (B) R1∩R2 is irreflexive and R1UR2 is reflexive. (C) Both R1∩R2 and R1UR2 are reflexive. (D) Both R1∩R2 and R1UR2 are irreflexive.

Last Answer : (C) Both R1∩R2 and R1UR2 are reflexive.

Which of the following factors influence whether a reaction will proceed by an SN1, SN2, E1, or E2 mechanism? (a) Structure of the alkyl halide (b) Solvent (c) Concentration of reagents (d) Nature of the nucleophile (e) All of these

Description : Which of the following factors influence whether a reaction will proceed by an SN1, SN2, E1, or E2 mechanism? (a) Structure of the alkyl halide (b) Solvent (c) Concentration of reagents (d) Nature of the nucleophile (e) All of these

Last Answer : All of these

The main task carried out in the …………… is to remove repeating attributes to separate tables. A) First Normal Form B) Second Normal Form C) Third Normal Form D) Fourth Normal Form

Description : The main task carried out in the …………… is to remove repeating attributes to separate tables. A) First Normal Form B) Second Normal Form C) Third Normal Form D) Fourth Normal Form

Last Answer : D) Fourth Normal Form

Predict the two most likely mechanisms which occur when 2-iodohexane is heated in ethanol. (a) SN2 and SN1 (b) E1 and E2 (c) SN2 and E2 (d) E1 and SN1

Description : Predict the two most likely mechanisms which occur when 2-iodohexane is heated in ethanol. (a) SN2 and SN1 (b) E1 and E2 (c) SN2 and E2 (d) E1 and SN1

Last Answer : E1 and SN1

Predict the two most likely mechanisms for the reaction of 2-iodohexane with sodium ethoxide. (a) SN2 and SN1 (b) E1 and E2 (c) SN2 and E2 (d) E1 and SN1

Description : Predict the two most likely mechanisms for the reaction of 2-iodohexane with sodium ethoxide. (a) SN2 and SN1 (b) E1 and E2 (c) SN2 and E2 (d) E1 and SN1

Last Answer : SN2 and E2

6 In a two winding transformer, the primary and secondary induced emf E1 & E2 are always A. equal in magnitude B. anti phase with each other C. in phase with each other D. determined by load on transformer secondary

Description : 6 In a two winding transformer, the primary and secondary induced emf E1 & E2 are always A. equal in magnitude B. anti phase with each other C. in phase with each other D. determined by load on transformer secondary

Last Answer : C. In phase with each other

There are three events E1, E2 and E3, one of which is must and only one can happen. -Maths 9th

Description : There are three events E1, E2 and E3, one of which is must and only one can happen. -Maths 9th

Last Answer : Since one and only one of the three events E1, E2 and E3 can happen, i.e, they are mutually exclusive. Therefore, P(E1) + P(E2) + P(E3) = 1 ...(i) Odds against E1 are 7 : 4 ⇒ Odds in favour of E1 are 4 : 7⇒ ... \(rac{1-rac{23}{88}}{rac{23}{88}}\) = \(rac{rac{65}{88}}{rac{23}{88}}\) = 65 : 23.

If the three independent events E1, E2 and E3, the probability that only E1 occurs is α, E2 occurs -Maths 9th

Description : If the three independent events E1, E2 and E3, the probability that only E1 occurs is α, E2 occurs -Maths 9th

Last Answer : (c) 6Let \(x\), y, z be the probabilities of happening of events E1, E2 and E3 respectively. Then, \(\alpha\) = P (occurrence of E1 only) = x (1 - y) (1 - z) \(\beta\) = P (occurrence of E2 only) = (1 - \(x\)) y (1 - ... (x\) = 6z (From (i) and (ii))⇒ \(rac{x}{z}\) = 6 ⇒ \(rac{P(E_1)}{P(E_3)}\) = 6.

De Broglie equation is (a) h/mv = 1 (b) E1 – E2 = hv (c) C = 1v (d) n1 = 2d sin q

Description : De Broglie equation is (a) h/mv = 1 (b) E1 – E2 = hv (c) C = 1v (d) n1 = 2d sin q

Last Answer : Ans:(a)

The de Broglie equation is (a) h/mv = 1 (b) hv = E2 - E1 (c) n 1 = 2d sin (d) c = hv

Description : The de Broglie equation is (a) h/mv = 1 (b) hv = E2 - E1 (c) n 1 = 2d sin (d) c = hv

Last Answer : Ans:(a)

In a consecutive reaction system of the given figure bellow, when E1 is much greater than E2 , the yield of B increases with the (A) Increase of temperature (B) Decrease of temperature (C) Increase in initial concentration of A (D) Decrease in initial concentration of A

Description : In a consecutive reaction system of the given figure bellow, when E1 is much greater than E2 , the yield of B increases with the (A) Increase of temperature (B) Decrease of temperature (C) Increase in initial concentration of A (D) Decrease in initial concentration of A

Last Answer : (A) Increase of temperature

When dipentyl ether is treated with excess HI, through what type of mechanism(s) does the major product result? (a) SN2 (b) SN1 (c) E1(d) E2

Description : When dipentyl ether is treated with excess HI, through what type of mechanism(s) does the major product result? (a) SN2 (b) SN1 (c) E1 (d) E2

Last Answer : SN2

The acid-catalyzed dehydration mechanism for alcohols is best described as a(n) : (a) E1 . (b) E2 . (c) SN1 (d) SN2

Description : The acid-catalyzed dehydration mechanism for alcohols is best described as a(n) : (a) E1 . (b) E2 . (c) SN1 (d) SN2

Last Answer : E1 .

Dehydrohalogenation of 2-bromobutane in the presence of a strong base proceeds via which of the following mechanistic pathways? (a) SN1 (b) SN2 (c) E1 (d) E2

Description : Dehydrohalogenation of 2-bromobutane in the presence of a strong base proceeds via which of the following mechanistic pathways? (a) SN1 (b) SN2 (c) E1 (d) E2

Last Answer : E2

An atomic energy state in which more atoms are in the lower energy state E1 than in the excited state E2, is known as a) population inversion b) normal population c) stimulated population d) atomic population

Description : An atomic energy state in which more atoms are in the lower energy state E1 than in the excited state E2, is known as a) population inversion b) normal population c) stimulated population d) atomic population

Last Answer : b) normal population

The emission in which the atom emits a photon of energy hf = E2 – E1 , in any arbitrary direction is a) Spontaneous emission b) stimulated emission c) induced emission d) both a & c

Description : The emission in which the atom emits a photon of energy hf = E2 – E1 , in any arbitrary direction is a) Spontaneous emission b) stimulated emission c) induced emission d) both a & c

Last Answer : d) both a & c

The incident photon absorbed by an atom in the ground state E1, thereby leaving the atom in the excited state E2 , is a) spontaneous absorption b) stimulated absorption c) induced absorption d) both b & c

Description : The incident photon absorbed by an atom in the ground state E1, thereby leaving the atom in the excited state E2 , is a) spontaneous absorption b) stimulated absorption c) induced absorption d) both b & c

Last Answer : d) both b & c

Let R1 and R2 be the remainders when the polynomials x^3 + 2x^2 – 5ax – 7 and x^2 + ax^2 – 12x + 6 are divided by (x + 1) and (x – 2) respectively. -Maths 9th

Description : Let R1 and R2 be the remainders when the polynomials x^3 + 2x^2 – 5ax – 7 and x^2 + ax^2 – 12x + 6 are divided by (x + 1) and (x – 2) respectively. -Maths 9th

Last Answer : answer:

The electrical diagram shown in the illustration shows _____________. EL-0021 A. 'R1', 'R2', and 'R3' are connected is series B. 'R1', 'R2', and 'R3' are connected in parallel C. the voltages measured across 'R1', 'R2' and 'R3' will be different if 'R1', 'R2' and 'R3' have different values D. the total resistance equals R1 + R2 + R3

Description : The electrical diagram shown in the illustration shows _____________. EL-0021 A. 'R1', 'R2', and 'R3' are connected is series B. 'R1', 'R2', and 'R3' are connected in parallel C. the voltages measured across ... if 'R1', 'R2' and 'R3' have different values D. the total resistance equals R1 + R2 + R3

Last Answer : Answer: B

weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Description : weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Last Answer : ANS: A

Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R

Description : Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R

Last Answer : Answer: A

A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Description : A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Last Answer : (a) 160 ohms. (b) 480 ohms

ey to represent relationship between tables is called (A) Primary key (B) Secondary Key (C) Foreign Key (D) None of these

Description : ey to represent relationship between tables is called (A) Primary key (B) Secondary Key (C) Foreign Key (D) None of these

Last Answer : (C) Foreign Key

If D1, D2,…. Dn are domains in a relational model, then the relation is a table, which is a subset of (A) D1+D2+…. +Dn (B) D1x D2x… xDn (C) D1U D2U….UDn (D) D1- D2-….-Dn

Description : If D1, D2,…. Dn are domains in a relational model, then the relation is a table, which is a subset of (A) D1+D2+…. +Dn (B) D1x D2x… xDn (C) D1U D2U….UDn (D) D1- D2-….-Dn

Last Answer : (B) D1x D2x… xDn

In a relational database model, NULL values can be used for all but which one of the following? (A) To allow duplicate tuples in the table by filling the primary key column(s) with NULL. (B) To avoid confusion with actual legitimate data values like 0 (zero) for integer columns and ‘’ (the empty string) for string columns. (C) To leave columns in a tuple marked as “unknown” when the actual value is unknown. (D) To fill a column in a tuple when that column does not really “exist” for that particular tuple.

Description : In a relational database model, NULL values can be used for all but which one of the following? (A) To allow duplicate tuples in the table by filling the primary key column(s) with NULL. (B) To ... D) To fill a column in a tuple when that column does not really exist for that particular tuple.

Last Answer : (A) To allow duplicate tuples in the table by filling the primary key column(s) with NULL.

Relational database schema normalization is NOT for: (A) reducing the number of joins required to satisfy a query. (B) eliminating uncontrolled redundancy of data stored in the database. (C) eliminating number of anomalies that could otherwise occur with inserts and deletes. (D) ensuring that functional dependencies are enforced.

Description : Relational database schema normalization is NOT for: (A) reducing the number of joins required to satisfy a query. (B) eliminating uncontrolled redundancy of data stored in the database. (C) ... could otherwise occur with inserts and deletes. (D) ensuring that functional dependencies are enforced. 

Last Answer : reducing the number of joins required to satisfy a query.

Consider the relations R(A,B) and S(B,C) and the following four relational algebra queries over R and S: I. πA,B(R⋈S) II. R⋈πB(S) III. R∩(πA(R) Χ πB(S)) IV. πA,R.B(R Χ S) where R.B refers to the column B in table R. One can determine that: (A) I, III and IV are the same query. (B) II, III and IV are the same query. (C) I, II and IV are the same query. (D) I, III and III are the same query.

Description : Consider the relations R(A,B) and S(B,C) and the following four relational algebra queries over R and S: I. πA,B(R⋈S) II. R⋈πB(S) III. R∩(πA(R) Χ πB(S)) IV. πA,R.B(R Χ S) where R.B refers to ... IV are the same query. (C) I, II and IV are the same query. (D) I, III and III are the same query.

Last Answer : (D) I, III and III are the same query.

Which agent enables the deliberation about the computational entities and actions? a) Hybrid b) Reflective c) Relational d) None of the mentioned

Description : Which agent enables the deliberation about the computational entities and actions? a) Hybrid b) Reflective c) Relational d) None of the mentioned

Last Answer : b) Reflective

What kind of mechanism is to be taken into account for converting a weak entity set into strong entity set in entity-relationship diagram ? (A) Generalization (B) Aggregation (C) Specialization (D) Adding suitable attributes

Description : What kind of mechanism is to be taken into account for converting a weak entity set into strong entity set in entity-relationship diagram ? (A) Generalization (B) Aggregation (C) Specialization (D) Adding suitable attributes

Last Answer : (D) Adding suitable attributes