Where can I purchase a Yamaha outboard motor that is used but still in good condition?

Where can I purchase a Yamaha outboard motor that is used but still in good condition?
by

1 Answer

Answer :

You can purchase a Yamaha outboard motor online at www.ebay.com. Also if you have a Yamaha distributorner you,it is possible they carry used motors
by

Related questions

How to Choose an Outboard Motor?

Description : How to Choose an Outboard Motor?

Last Answer : Instead of buying a new boat, the best alternative may be simply purchasing a new motor. For those that have fishing boats and other working craft, he or she probably has an outboard motor ... reliable four-stroke engines. These engines have recently made their debut over the last ten years because

Is it worth buying a used outboard motor?

Description : Is it worth buying a used outboard motor?

Last Answer : An outboard motor is a propulsion system that contains the engine, gearbox and propeller. Purchasing a used motor can save you some money however it is important to keep in mind the warranty you are looking for as this is often limited on used parts.

What is the weight of a 1992 Yamaha pro v 200 out boar motor?

Description : What is the weight of a 1992 Yamaha pro v 200 out boar motor?

Last Answer : What is the answer ?

The following companies have launched electric motor cycles in india : A . revolt B . hero C . Yamaha D . all of the above

Description : The following companies have launched electric motor cycles in india : A . revolt B . hero C . Yamaha D . all of the above

Last Answer : A . revolt

Need help connecting outboard gear to Pro tools?

Description : Need help connecting outboard gear to Pro tools?

Last Answer : I have no idea how to answer your question, but here’s a tip for question-writing. Your question is too long! Just put a general short question (eg Could somebody please help with my microphone problems?) before further elaboration. There is a reason for the details box, you know?

If you run a ground in an outboard boat and you and rsquore not taking on water what is the first step in attempting to free your vessel?

Description : If you run a ground in an outboard boat and you and rsquore not taking on water what is the first step in attempting to free your vessel?

Last Answer : Either wait for high tide - or jettison something you cansacrifice to make the boat ride higher.

What to do if you run aground in an outboard boat for freeing your vessel?

Description : What to do if you run aground in an outboard boat for freeing your vessel?

Last Answer : Raise the motor, get out and push the boat to deeper water.

If your inboard or outboard boat run aground what action should you take in addition to shift the weight away from the point of impact?

Description : If your inboard or outboard boat run aground what action should you take in addition to shift the weight away from the point of impact?

Last Answer : Place the drive in neutral.Check everyone onboard is OK.Check for leaks.Kill the engine and raise the skeg to check that the prop has not been damaged.If there is the depth try and reverse off.IF any of the above does not work, Radio for help.

How to Maintain Outboard Motors?

Description : How to Maintain Outboard Motors?

Last Answer : While a decent outboard motor is designed to last for many yearsto come, the truth of the matter is that many owners drasticallylower the lifespan of their outboard motors by failing to ... visually inspecting your outdoormotor for leaks and cracks in the blade, begin by checking,draining and

How do I compare the horsepower ratings of inboard vs. outboard motors - is one kind more powerful?

Description : How do I compare the horsepower ratings of inboard vs. outboard motors - is one kind more powerful?

Last Answer : Inboard engines are quieter and are normally more powerful than outboard motors. Outboards are normally less exspensive and easier to maintain.

On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. millivolt meter and a jumper B. ohmmeter C. megohm meter D. high potential tester

Description : On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. millivolt meter and a jumper B. ohmmeter C. megohm meter D. high potential tester

Last Answer : Answer: A

On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. ohmmeter with the machine secured B. millivolt meter and a jumper with the machine running C. megohm meter with the machine running D. voltmeter and ampmeter with the machine running

Description : On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. ohmmeter with the ... C. megohm meter with the machine running D. voltmeter and ampmeter with the machine running

Last Answer : Answer: B

How much would a YAMAHA BB414 electric bass cost?

Description : How much would a YAMAHA BB414 electric bass cost?

Last Answer : answer:Well I did a simple web search FOR you and found about 18,700 links with prices. Looks like it should cost you around $400.00

If Chris Bromham took off on his Yamaha and jumped a horizontal distance of 74.0 m across a row of cars and assuming that he started and landed at the same level and was airborne for 1.3 s, what was his initial (angled) velocity as he left the ground?

Description : If Chris Bromham took off on his Yamaha and jumped a horizontal distance of 74.0 m across a row of cars and assuming that he started and landed at the same level and was airborne for 1.3 s, what was his initial (angled) velocity as he left the ground?

Last Answer : I really need help. If someone can explain this to me, it'll be great!

Yamaha XJ6

Description : Hello, I bought a bazaar of Yamaha XJ6 2010 57 kw in an unnamed bazaar, I'm a beginner so I can't know what quality I'm riding at. This moto should have 6 gears, but when shifting on the spot I counted only 4 it didn't work anymore, you don't know what it could be? Thank you

Last Answer : Need Answer

Guitar,Yamaha truss rod adjustment

Description : Guitar,Yamaha truss rod adjustment

Last Answer : Need Answer

did they make a 2001 yamaha xt250

Description : did they make a 2001 yamaha xt250

Last Answer : Need Answer

What is the value of a nippon gakki co.ltd Yamaha model no 60 guitar?

Description : What is the value of a nippon gakki co.ltd Yamaha model no 60 guitar?

Last Answer : anywhere from $250 to $350.

How much hp does a Yamaha yz85 have?

Description : How much hp does a Yamaha yz85 have?

Last Answer : Need answer

How much is a Yamaha fg 160 guiter worth?

Description : How much is a Yamaha fg 160 guiter worth?

Last Answer : Need answer

What is the value of a nippon gakki co.ltd Yamaha model no 60 guitar?

Description : What is the value of a nippon gakki co.ltd Yamaha model no 60 guitar?

Last Answer : anywhere from $250 to $350.

how do i find out year model on yamaha timberwolf?

Description : how do i find out year model on yamaha timberwolf?

Last Answer : how do i find out year model on yamaha timberwolf

yamaha warrior 1989 vin # location?

Description : yamaha warrior 1989 vin # location?

Last Answer : yamaha warrior 1989 vin # location

What do I need to know before I buy a 2005 Yamaha?

Description : What do I need to know before I buy a 2005 Yamaha?

Last Answer : When buying 2005 Yamaha it is important to know the history of the vehicle as well as any major repair work that has been done. You will likely also want to find out how much it will cost you to insure as this will be a expense on top of the cost to buy.

What is the safety record of the Yamaha XT?

Description : What is the safety record of the Yamaha XT?

Last Answer : This is a type of question that is purely a matter of opinion. The saftey record of a motorcycle that is mainly an offroad vehicle is very dependent on the Skill and Knowledge of the Rider. If you are ... Disc Brakes. The XT 250 weighs -50102- lbs. and has a ground clearance of 11.2 inches.

Can you use a Yamaha motorcycle part on a honda motorcycle?

Description : Can you use a Yamaha motorcycle part on a honda motorcycle?

Last Answer : No, most Yamaha bike parts can not be used with Honda. Honda has some specific parts that may only be replaced by Honda.

What Yamaha keyboards support MIDI and USB cables?

Description : What Yamaha keyboards support MIDI and USB cables?

Last Answer : Most Yamaha keyboards have jacks for MIDI and USB cables. Recently, Yamaha keyboards have built-in MIDI and USB cables to give the keyboard a compact look.

Is a Yamaha r1 better than Yamaha u1?

Description : Is a Yamaha r1 better than Yamaha u1?

Last Answer : U1 have three paddle, one for softer engine sound, and the left one for even quieter than the middle one. The paddle on the right is for sustain engine power. R1 just have 1000cc, and heavy...

Whats the average compression on a yamaha raptor 80 cc?

Description : Whats the average compression on a yamaha raptor 80 cc?

Last Answer : 120 Compression.

The Japanese naval officer who conceived the attack on Pearl Harbor was: Tojo, Yamaha, Yamamoto?

Description : The Japanese naval officer who conceived the attack on Pearl Harbor was: Tojo, Yamaha, Yamamoto?

Last Answer : Admiral Yamamoto

Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Description : Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Last Answer : Following are the suggestion the energy conservation techniques in following cases :  (i) Motor is running with 70% loaded condition: Use APFC or IPFC for better power factor improvement. Use ... If possible use low capacity motor for above condition. If possible switch off the motor.

Cost of inventories includes A. Direct Material + Direct Expenses B. Direct Labour + Direct Expenses C. All costs of purchase, cost of conversion and other costs incurred in bringing the inventories to their present location and condition D. Direct material only

Description : Cost of inventories includes A. Direct Material + Direct Expenses B. Direct Labour + Direct Expenses C. All costs of purchase, cost of conversion and other costs incurred in bringing the inventories to their present location and condition D. Direct material only

Last Answer : C. All costs of purchase, cost of conversion and other costs incurred in bringing the inventories to their present location and condition

While Computing the actual cost of any asset falling within a block, direct cost attributable to bring the asset to its present location and working condition for its intended use(i.e. expenses incurred for acquiring the asset e.g. freight, insurance, etc.) a) Be added to the purchase price b) Be subtracted from the purchase price c) Be subtracted from WDV d) Be claimed as revenue expenditure

Description : While Computing the actual cost of any asset falling within a block, direct cost attributable to bring the asset to its present location and working condition for its intended use(i.e. expenses incurred ... from the purchase price c) Be subtracted from WDV d) Be claimed as revenue expenditure

Last Answer : b) Be subtracted from the purchase price

If a DC motor runs hot, the cause may be _____________. A. high mica condition B. low ambient temperature C. clogged ventilation ducts D. an open in the shunt field

Description : If a DC motor runs hot, the cause may be _____________. A. high mica condition B. low ambient temperature C. clogged ventilation ducts D. an open in the shunt field

Last Answer : Answer: C

If deck machinery is expected to be idle for an extended period of time you should____________. A. have electrical safety gloves available in case of electrical shock before running B. perform a 'high pot' test to determine the condition of the insulation C. water wash the motor and controller to remove any salt that may interfere with smooth operation D. check run at regular intervals to inusre correct operation and to renew the internal coating of lubrication

Description : If deck machinery is expected to be idle for an extended period of time you should____________. A. have electrical safety gloves available in case of electrical shock before running B. perform ... run at regular intervals to inusre correct operation and to renew the internal coating of lubrication

Last Answer : Answer: D

A flickering ground detection lamp on a DC system would indicate a _____________. A. multiple-ground condition in the distribution system B. ground in an armature coil of an operating machine C. ground in a motor accompanied with a short D. short between two adjacent bars of the generator commutator

Description : A flickering ground detection lamp on a DC system would indicate a _____________. A. multiple-ground condition in the distribution system B. ground in an armature coil of an operating machine C. ground in a motor accompanied with a short D. short between two adjacent bars of the generator commutator

Last Answer : Answer: B

One function of the movable cams in a drum-type motor controller is to _____________. A. regulate the speed of the motor B. maintain resistance contacts in clean condition C. insulate the operating handle D. limit the amount of load put on the motor

Description : One function of the movable cams in a drum-type motor controller is to _____________. A. regulate the speed of the motor B. maintain resistance contacts in clean condition C. insulate the operating handle D. limit the amount of load put on the motor

Last Answer : Answer: A

What is the condition for maximum torque in induction motor?

Description : What is the condition for maximum torque in induction motor?

Last Answer : Starting torque will be maximum when the rotor resistance / phase is equal to standstill rotor reactance / phase

Why the electric motor of a fan with backward curved blades is never got overloaded under any condition ?

Description : Why the electric motor of a fan with backward curved blades is never got overloaded under any condition ?

Last Answer : The maximum power is consumed at about 70% of maximum flow in case’of fan with backward blades. For higher flow, power consumption gets lower.

The torque-speed characteristics of an a.c. operated universal motor has a ______characteristic and it______ be started under no-load condition. (A) inverse, can (B) nearly inverse, can (C) inverse, cannot (D) nearly inverse, cannot

Description : The torque-speed characteristics of an a.c. operated universal motor has a ______characteristic and it______ be started under no-load condition. (A) inverse, can (B) nearly inverse, can (C) inverse, cannot (D) nearly inverse, cannot

Last Answer : Ans: C If torque is zero then speed may exceed up to infinite, that is dangerous for machine and machine can be damaged. N α 1/ T

When your motor-bike is out of order all of sudden then what will you do in this situation? Options: A) You will immediately get the bike repair because you feel inferiority to go to the institute without it B) You will not touch it because it saves you from the unusual expense of petrol and repairing C) You will get it repaired immediately otherwise it will be deteriorated D) You will become neutral as you believe to face every condition

Description : When your motor-bike is out of order all of sudden then what will you do in this situation? Options: A) You will immediately get the bike repair because you feel inferiority to go ... immediately otherwise it will be deteriorated D) You will become neutral as you believe to face every condition

Last Answer : C) You will get it repaired immediately otherwise it will be deteriorated

When running under no-load condition and with over excitation, armature current Ia drawn by a synchronous motor

Description : When running under no-load condition and with over excitation, armature current Ia drawn by a synchronous motor

Last Answer : When running under no-load condition and with over excitation, armature current Ia drawn by a synchronous motor Leads the applied voltage

A 3-phase induction motor under locked rotor condition and with stator supply, induces

Description : A 3-phase induction motor under locked rotor condition and with stator supply, induces (A) small voltage at slip frequency (B) large voltage at rotor frequency (C) zero voltage at zero frequency (D) large voltage at slip frequency

Last Answer : A 3-phase induction motor under locked rotor condition and with stator supply, induces (A) small voltage at slip frequency (B) large voltage at rotor frequency (C) zero voltage at zero frequency (D) large voltage at slip frequency

The condition for maximum power in case of D.C. motor is?

Last Answer : (b) Clostridium butylicum Lipase Removal of oil stains