A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel
by

1 Answer

Answer :

ANSWER: Z -- 300 OHM RESISTOR IN PARALLEL
by

Related questions

An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Description : An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Last Answer : ANSWER: Z -- 200 OHMS

A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Description : A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Last Answer : ANSWER: W -- 25 OHMS

A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Description : A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Last Answer : ANSWER: X -- CURRENT WILL LAG BY 26 DEGREES.

Two identical resistors are connected in parallel and consume 200 watts together. A third identical resistor is added in parallel. The total power consumed is: w) 100 watts x) 200 watts y) 300 watts z) 400 watts

Description : Two identical resistors are connected in parallel and consume 200 watts together. A third identical resistor is added in parallel. The total power consumed is: w) 100 watts x) 200 watts y) 300 watts z) 400 watts

Last Answer : ANSWER: Y -- 300 WATTS

A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Description : A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Last Answer : ANSWER: X -- 1/3

A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Description : A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Last Answer : ANSWER: Z -- 3 AMPERES

Which one of the following is the advantage of connecting two dry cells in parallel instead of in series? Is it because the parallel arrangement: w) gives twice the EMF of one dry cell x) has no internal resistance y) generates heat in an external circuit half as fast as would a single cell z) has half the internal resistance of a single cell

Description : Which one of the following is the advantage of connecting two dry cells in parallel instead of in series? Is it because the parallel arrangement: w) gives twice the EMF of one dry cell x) has no ... circuit half as fast as would a single cell z) has half the internal resistance of a single cell

Last Answer : ANSWER: Z -- HAS HALF THE INTERNAL RESISTANCE OF A SINGLE CELL 

Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the vapor pressure of "X" be when the volume above the liquid is 100 ml and the temperature 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Last Answer : ANSWER: Y -- 120 TORR

A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is

Last Answer : A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is 0.000625 /°C.

A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination?

Description : A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination? 

Last Answer : ANSWER: 3 AND 1/3 OHM

A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

What power would be consumed by the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Description : What power would be consumed by the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Last Answer : Answer: D

What would be the voltage drop across the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Description : What would be the voltage drop across the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Last Answer : Answer: C

What is the moment of inertia acting on a rectangle of width 15 mm and depth 40 mm about base by using theorem of parallel axes? a. 320 x 103 mm4 b. 300 x 103 mm4 c. 240 x 103 mm4 d. 80 x 103 mm

Description : What is the moment of inertia acting on a rectangle of width 15 mm and depth 40 mm about base by using theorem of parallel axes? a. 320 x 103 mm4 b. 300 x 103 mm4 c. 240 x 103 mm4 d. 80 x 103 mm

Last Answer : a. 320 x 103 mm4

A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

Which one of the following is the way in which a galvanometer is converted into a voltmeter? Is it by connecting: w) a high resistance coil in parallel with its moveable coil x) a low resistance coil in parallel with its moveable coil y) a high resistance coil in series with its moveable coil z) a low resistance coil in series with its moveable coil

Description : Which one of the following is the way in which a galvanometer is converted into a voltmeter? Is it by connecting: w) a high resistance coil in parallel with its moveable coil x) a low resistance ... coil in series with its moveable coil z) a low resistance coil in series with its moveable coil 

Last Answer : ANSWER: Y -- A HIGH RESISTANCE COIL IN SERIES WITH ITS MOVEABLE COIL 

To convert a galvanometer to a voltmeter, you should add a: w) high resistance in series x) high resistance in parallel y) low resistance in series z) low resistance in parallel

Description : To convert a galvanometer to a voltmeter, you should add a: w) high resistance in series x) high resistance in parallel y) low resistance in series z) low resistance in parallel

Last Answer : ANSWER: W -- HIGH RESISTANCE IN SERIES

A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V,

Description : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum when the supply frequency is 1 kHz. The ... (A) 40, 400 Hz (B) 10, 100 Hz (C) 20, 50 Hz (D) 50, 20 Hz

Last Answer : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum ... supply frequency is 1 kHz. The approximate values of Q-factor and bandwidth are, respectively 20, 50 Hz

Which is NOT a characteristic of a series circuit? w) The current is the same throughout. x) The total resistance is the sum of the individual resistance. y) The voltage of the source equals the sum of the circuit's individual voltage drops. z) The total resistance is the sum of the reciprocals of the individual resistances.

Description : Which is NOT a characteristic of a series circuit? w) The current is the same throughout. x) The total resistance is the sum of the individual resistance. y) The voltage of the source ... individual voltage drops. z) The total resistance is the sum of the reciprocals of the individual resistances.

Last Answer : ANSWER: Z -- THE TOTAL RESISTANCE IS THE SUM OF THE RECIPROCALS OF THE RECIPROCAL OF THE INDIVIDUAL RESISTANCES.

Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Description : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Last Answer : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and ... in ohm is A. 4 B. 6 C. 8 D. 12

Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire breaks, the effective resistance is 2 ohm

Description : Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire breaks, the effective resistance is 2 ohm

Last Answer : Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire ... ` C. `(6)/(5)Omega` D. `3Omega`

A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Description : A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Last Answer : (a) 160 ohms. (b) 480 ohms

What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 100, and the needle is at the position indicated by the letter 'Y'? EL-0047 A. 220 ohms B. 240 ohms C. 2,400 ohms D. 24,000 ohms

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 100, and the needle is at the position indicated by the letter 'Y'? EL-0047 A. 220 ohms B. 240 ohms C. 2,400 ohms D. 24,000 ohms

Last Answer : Answer: C

What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1 and the needle is at the position indicated by the letter 'Y'? EL-0047 A. 2.2 ohms B. 24 ohms C. 240 ohms D. 2,400 ohms

Description : What is the resistance value indicated by the multimeter scale illustrated, if the range switch is set at R X 1 and the needle is at the position indicated by the letter 'Y'? EL-0047 A. 2.2 ohms B. 24 ohms C. 240 ohms D. 2,400 ohms

Last Answer : Answer: B

Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Last Answer : 25 ohms

When 2,4 and 6 ohms resistor are connected in parallel their resultant equivalent resistance will be A. 12ohm b. 11/12ohm C. 12/11ohm d. None

Description : When 2,4 and 6 ohms resistor are connected in parallel their resultant equivalent resistance will be A. 12ohm b. 11/12ohm C. 12/11ohm d. None

Last Answer : C. 12/11ohm

Motorized knapsack sprayer blade rotation at about ……. To rev/min. a. 200 to 300. c. 100 to 120 b. 120 to 400. d. 150 to 300

Description : Motorized knapsack sprayer blade rotation at about ……. To rev/min. a. 200 to 300. c. 100 to 120 b. 120 to 400. d. 150 to 300

Last Answer : 100 to 120

The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Description : The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Last Answer : c) 400

The lossless line of characteristics impedance 300 Ohm is terminated in a pure resistance of 200 Ohm.

Description : The lossless line of characteristics impedance 300 Ohm is terminated in a pure resistance of 200 Ohm. The value of the standing wave ratio is  (a) 1.5 (b) 0.67 (c) 1.0 (d) 1.25

Last Answer : The lossless line of characteristics impedance 300 Ohm is terminated in a pure resistance of 200 Ohm. The value of the standing wave ratio is 1.5

The blood cholesterol level in 100ml of blood in a normal person varies between (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg

Description : The blood cholesterol level in 100ml of blood in a normal person varies between (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg

Last Answer : (1) 150 and 200 mg Explanation: Cholesterol is defined as a waxy alcohol, fat-like substance that occurs naturally in all areas of the human body. Cholesterol is measured in milligrams per 100 ... to be normal blood cholesterol; 200-239 mg/dL borderlinehigh; and > 240 mg/dl high cholesterol.

What is the normal blood sugar level of a human being? (1) Close to 10 mg/ml (2) 120 - 150 mg/dl (3) 80 - 90 mg/dl (4) 150 — 200 mg/dl

Description : What is the normal blood sugar level of a human being? (1) Close to 10 mg/ml (2) 120 - 150 mg/dl (3) 80 - 90 mg/dl (4) 150 — 200 mg/dl

Last Answer : (2) 120 - 150 mg/dl Explanation: The blood sugar concentration or blood glucose level is the amount of glucose (sugar) present in the blood of a human or animal. The body naturally tightly regulates blood ... (termed "the fasting level"), and rise after meals for an hour or two by a few millimolar.

The blood cholesterol level in 100 ml of blood in a normal person varies between— (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg

Description : The blood cholesterol level in 100 ml of blood in a normal person varies between— (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg

Last Answer :  150 and 200 mg

What is the normal blood sugar level of a human being? (1) Close to 10 mg/ml (2) 120 – 150 mg/dl (3) 80 – 90 mg/dl (4) 150 – 200 mg/dl

Description : What is the normal blood sugar level of a human being? (1) Close to 10 mg/ml (2) 120 – 150 mg/dl (3) 80 – 90 mg/dl (4) 150 – 200 mg/dl

Last Answer : 120 – 150 mg/dl 

When a bridge is used to measure resistance, what is the value of Rx if R1 equals 80 ohms, R2 equals 120 ohms, and R3 equals 280 ohms?

Description : When a bridge is used to measure resistance, what is the value of Rx if R1 equals 80 ohms, R2 equals 120 ohms, and R3 equals 280 ohms?

Last Answer : 420 ohms.

A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?

Description : A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?

Last Answer : (a) 330 volts. (b) E1 = 150 volts. E2 = 180 volts. (c) 1.98 kilowatts. (d) P1 = 900 watts. P2 = 1.08 kilowatts component but in a parallel circuit total current divides among the available paths.

Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Last Answer : (D) 1000-1100

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

Two coils connected in series have resistance of 600 ohm and 300 ohm ...

Description : Two coils connected in series have resistance of 600 ohm and 300 ohm and temperature coefficients of 0.1% and 0.4% respectively.The resistance of the combination at 50oC will be 

Last Answer : Two coils connected in series have resistance of 600 ohm and 300 ohm and temperature coefficients of 0.1% and 0.4% respectively.The resistance of the combination at 50oC will be 990 ohm

High-temperature superconductors have been in the news lately. These materials become superconductive at temperatures around w) 200 degrees Fahrenheit x) 100 degrees Fahrenheit y) -150 degrees Fahrenheit z) -350 degrees Fahrenheit

Description : High-temperature superconductors have been in the news lately. These materials become superconductive at temperatures around w) 200 degrees Fahrenheit x) 100 degrees Fahrenheit y) -150 degrees Fahrenheit z) -350 degrees Fahrenheit

Last Answer : ANSWER: Z -- -350 DEGREES FAHRENHEIT  

In 1991, the frozen body of a late stone age man was found amazingly intact in the Alps near the Italian-Austrian border. Its age was determined to be about: w) 2,200 years x) 5,300 years y) 12,800 years z) 30,000 years

Description : In 1991, the frozen body of a late stone age man was found amazingly intact in the Alps near the Italian-Austrian border. Its age was determined to be about: w) 2,200 years x) 5,300 years y) 12,800 years z) 30,000 years

Last Answer : ANSWER: X -- 5,300 YEARS

What is the impedance of a one microfarad capacitor at 60 Hertz: w) 16,700 ohms x) 2,650 ohms y) 3.8x10-4 ohms z) 6x10-5 ohms

Description : What is the impedance of a one microfarad capacitor at 60 Hertz: w) 16,700 ohms x) 2,650 ohms y) 3.8x10-4 ohms z) 6x10-5 ohms

Last Answer : ANSWER: X -- 2,650 OHMS

Which one of the following laws best describes the operation of an electric generator? w) Ampere's Law x) Gauss' Law y) Ohm's Law for Conductors z) Faraday's Law of Induction

Description : Which one of the following laws best describes the operation of an electric generator? w) Ampere's Law x) Gauss' Law y) Ohm's Law for Conductors z) Faraday's Law of Induction

Last Answer : ANSWER: Z -- FARADAY'S LAW OF INDUCTION 

What law describes the force between two stationary electrically charged objects? w) Ampere's law x) Coulomb's law y) Kirchoff's Rules (pron: kir-koff rules) z) Ohm's law

Description : What law describes the force between two stationary electrically charged objects? w) Ampere's law x) Coulomb's law y) Kirchoff's Rules (pron: kir-koff rules) z) Ohm's law

Last Answer : ANSWER: X -- COULOMB'S LAW

Induced electric currents can be explained using which of the following laws? w) Gauss's Law x) Faraday's Law y) Ohm's Law z) Ampere's Law

Description : Induced electric currents can be explained using which of the following laws? w) Gauss's Law x) Faraday's Law y) Ohm's Law z) Ampere's Law

Last Answer : ANSWER: X -- FARADAY'S LAW

The force acting between two point charges can be computed using which of the following laws? w) Ohm's Law x) Ampere's Law y) Coulomb's Law z) Newton's Second Law.

Description : The force acting between two point charges can be computed using which of the following laws? w) Ohm's Law x) Ampere's Law y) Coulomb's Law z) Newton's Second Law.

Last Answer : ANSWER: Y -- COULOMB'S LAW

Electric current may be expressed in which one of the following units? w) coulombs/volt x) joules/coulomb y) coulombs/second z) ohms/second

Description : Electric current may be expressed in which one of the following units? w) coulombs/volt x) joules/coulomb y) coulombs/second z) ohms/second

Last Answer : ANSWER: Y -- COULOMBS/SECOND

A school has 4 sections of class 12, such that half the number of students of 1st section, 1/3rd of 2nd section, 1/4th of 3rd section and 1/5th of the 4th section are equal. If total number of students in class 12 is 420, find the number of students in sections 1st and 2nd. A) 180 B) 120 C) 240 D) 150 E) 260

Description : A school has 4 sections of class 12, such that half the number of students of 1st section, 1/3rd of 2nd section, 1/4th of 3rd section and 1/5th of the 4th section are equal. If total number of students in ... find the number of students in sections 1st and 2nd. A) 180 B) 120 C) 240 D) 150 E) 260

Last Answer : Answer: D Let number of students in 4 sections be A, B, C, D respectively. Then 1/2 of A = 1/3 of b = 1/4 of C = 1/5 of D So A : B : C : D = 2 : 3 : 4 : 5 [When A/2 = B/3 = C/4, then ratio A: B : C = 2 : 3 : 4] So students in 1st and 2nd section = [(2+3)/(2+3+4+5)] * 420 = 150

N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Description : N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Last Answer : 25 ohms

what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Description : what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Last Answer : equivalent resistance

In the illustrated circuit, what is the voltage of the battery if the resistance of R1 is 150 ohms, the total resistance is 250 ohms and the current though R2 is 25 milliamps? EL-0036 A. 12 volts B. 24 volts C. 1.5 volts D. 6.25 volts

Description : In the illustrated circuit, what is the voltage of the battery if the resistance of R1 is 150 ohms, the total resistance is 250 ohms and the current though R2 is 25 milliamps? EL-0036 A. 12 volts B. 24 volts C. 1.5 volts D. 6.25 volts

Last Answer : Answer: D