Discuss causes and remedies for following faults in CI engine: (i) Engine does not start or stalls just after starting (ii) Excessive fuel consumption.

Discuss causes and remedies for following faults in CI engine: (i) Engine does not start or stalls just after starting (ii) Excessive fuel consumption.
by

1 Answer

Answer :

I) Engine does not start or stalls just after starting

image

by

Related questions

Discuss the drawbacks of carbureted SI engine on the base of, Air-fuel ratio, fuel consumption, power output, emission.

Description : Discuss the drawbacks of carbureted SI engine on the base of, Air-fuel ratio, fuel consumption, power output, emission. 

Last Answer : 1) Air-fuel ratio: - As in SI engine Air-fuel ratio varies from 8:1 to 18.5:1 i.e. from 8 kg of air/kg of fuel to 18.5 kg of air/kg of fuel. Richer or leaner air-fuel ratio limit causes the engine to ... 8 kg of air/kg of fuel to 18.5 kg of air/kg of fuel. So emission is more in SI engine.

Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Description : Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Last Answer : Parameter SI engine CI engine Air-fuel ratio air-fuel ratio is 14.7:1 air-fuel ratio is 20:1 to 70:1  Power output  Power output is Less than CI engine due ... Knocking take place at the end of combustion. Knocking take place at beginning or start of the combustion. 

Write the properties of diesel as a fuel in CI engine.

Description : Write the properties of diesel as a fuel in CI engine.

Last Answer : 1) Volatility: - The fuel should be sufficiently volatile in the operating range of temperature to produce good mixing and combustion. 2) Viscosity: Viscosity of a fuel is a measure of its resistance to flow. ... the temperature of unit mass of a diesel through 1°c. It is about 1.9 KJ/Kg°c.

Define delay period in CI engine. Explain factors affecting delay period

Description : Define delay period in CI engine. Explain factors affecting delay period

Last Answer : The period between the start of fuel injection into the combustion chamber and the start of combustion is termed as delay period in CI engine. factors affecting delay period:-  

State the four properties of CI engine fuels.

Description : State the four properties of CI engine fuels.

Last Answer : Properties of CI fuel: (1) Volatility 2) Viscosity 3) Flash point 4) Fire point 5) Cetane number 6) Calorific value 7) Sulphur 8) Contamination 9) Cloud point 10) Pour point

Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Description : Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Last Answer : Drawbacks of carbureted (SI) Engine. Parameter Drawbacks Emission Does not meet emission Norms Fuel consumption Due to absence of throttling specific fuel consumption is ... distribution of charge. Fuel distribution for each cylinder is not equal for multi cylinder engine.

Compare performance characteristics of SI and CI engines.

Description : Compare performance characteristics of SI and CI engines. 

Last Answer : Variable/Parameter SI Engine CI Engine Power output per unit weight 2.7 Kg/Kw 6.5 Kg/Kw Power output per unit displacement 30 Kw/liter 15 Kw/liter Acceleration Not ... load, idling.  Fuel safety More volatile so less safer Less volatile so more safer

State the drawbacks of carbureted (SI) engines on the basis of fuel distribution, emission, power output and fuel consumption.

Description : State the drawbacks of carbureted (SI) engines on the basis of fuel distribution, emission, power output and fuel consumption.

Last Answer :  Drawbacks of carburetted S.I. engine: 1) Fuel distribution- Mal-distribution of charge. 2) Emission- More emissin 3) Power output- Less 4) Fuel consumption - More

Draw block diagram for EDC type fuel pump in diesel engine.

Description : Draw block diagram for EDC type fuel pump in diesel engine.

Last Answer : Block diagram for EDC type fuel pump in diesel engine OR

Why pressure regulator is required in fuel supply system of EFI system engine?

Description : Why pressure regulator is required in fuel supply system of EFI system engine? 

Last Answer : 1. In low pressure common rail systems (EFI) that do not require high capacity fuel flow where the fuel injector is mounted on a intake manifold port runner on engine displacing less than 2.0 liters. ... differential pressure between 2.0 and 3.5 bar and allows excess fuel to return to the fuel tank.

Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Description : Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Last Answer : Sr. No. Carburetted engine Electronic Fuel Injection (EFI) engine 1 Fuel atomization depends upon velocity of air in the venturi. Atomization of fuel is independent of cranking ... occurs in carbureted engine. Equal quantity of fuel is supplied to port for each cylinder

List two drawbacks of carbureted SI engine during fuel distribution and drivability.

Description : List two drawbacks of carbureted SI engine during fuel distribution and drivability.

Last Answer : Fuel distribution : Drawbacks 1. Mal-distribution of charge. 2. Inaccurate metering of charge. 3. Fuel atomization depends upon velocity of air in the venture. Drivability: Drawbacks 1 ... temperature compensation. 4) No compensation of Exhaust gas recirculation. 5) Backfiring may take place.

Explain any two engine modifications and two fuel modifications to control emission from gasoline engine.

Description : Explain any two engine modifications and two fuel modifications to control emission from gasoline engine. 

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air ... Fuel Volatility: Fuel volatility is compromise of high volatility and low volatility to control the pollution

Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Description : Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Last Answer : Fundamental requirement:-The line diagram of CRDI shows that the system is controlled by ECU. The sensors in the system are used to feed the input in the ECU.ECU will provide the signal ... fuel injector, common rail, High pressure fuel pump, ECM/ECU, Pressure sensor, Rail pressure limiter. 

State four properties of SI engine fuel.

Description : State four properties of SI engine fuel.

Last Answer : 1. It should mix readily with air and provide uniform manifold distribution. That is, it should easily vaporize. 2. It must be knock resistant. 3. It should not pre-ignite easily. 4. It should ... not form gum and varnish. OR 1. Volatility2. Knock Resistivity 3. Sulphur Content 4. Gum Content

LPG is used as an alternative fuel for SI engine. Justify your answer

Description : LPG is used as an alternative fuel for SI engine. Justify your answer

Last Answer : LPG is used as an alternative fuel for SI engine because of following advantages. 1. The exceptional advantages of LPG as an alternative engine fuel have been mainly from the simplicity of its ... plug is increased. 9. Fuel supply system can be easily modified by introducing a conversion kit.

Describe four properties of gasoline as a fuel for SI engine

Description : Describe four properties of gasoline as a fuel for SI engine

Last Answer : Volatility: volatility depend upon fractinal composition of fuel. Method of measuring volatility has been standardized by ASTM ( American society of Testing Materials) and the graohical representation ... gasoline to improve the gasoline stability during storage by inhibiting the formation of gums.

Compare carbureted engine fuel supply system with MPFI system.

Description : Compare carbureted engine fuel supply system with MPFI system.

Last Answer : Sr.No. Carbureted fuel supply system MPFI fuel supply system 1 Mal-distribution of charge.  Uniform distribution of charge.  2 Due to resistance in intake manifold volumetric ... is take place inside the manifold. fuel being injected into or close to the cylinder. 

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large

Explain the effect of the following engine variables on ignition lag and flame propagation: (i) cylinder size (ii) cylinder wall temperature (iii) compression ratio and (iv) inlet air temperature

Description : Explain the effect of the following engine variables on ignition lag and flame propagation: (i) cylinder size (ii) cylinder wall temperature (iii) compression ratio and (iv) inlet air temperature

Last Answer : (i) Cylinder size - Engine of similar design generally run at the same speed. This is achieved by smaller engine having larger RPM and larger engines having smaller RPM. Due to the same ... all reduces the ignition lag. Pre-increase in the intake temperature and pressure increases the flame speed.

Discuss the advantages and limitations of electric Vehicles.

Description : Discuss the advantages and limitations of electric Vehicles.

Last Answer : Advantages:  1. Rapid acceleration 2. Noise free operation 3. No exhaust fumes 4. High reliability 5. Easy maintenance 6. Regenerating braking 7. No loss power in idling. 8. Easy to drive ... vehicles 4. Life of batteries quite short 5. Limited power 6. The top speed is quite low. 

The tendency of knocking in CI engine reduces by (a) High self ignition temperature of fuel (b) Decrease in jacket water temperature (c) Injection of fuel just before TDC (d) Decrease in injection pressure

Description : The tendency of knocking in CI engine reduces by (a) High self ignition temperature of fuel (b) Decrease in jacket water temperature (c) Injection of fuel just before TDC (d) Decrease in injection pressure

Last Answer : Ans :c

Explain the methods of fuel injection used EFI system.

Description : Explain the methods of fuel injection used EFI system.

Last Answer : Methods of fuel injection: 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection. 4. Continuous injection. 1. Simultaneous Injection: Injection of fuel ... of the fuel injection is determined by ECU depending upon load and speed. 

Compare throttle body injection with port fuel injection systems.

Description : Compare throttle body injection with port fuel injection systems.

Last Answer : Sr. No. TBI system PFI System 1 Fuel is injected into the center of the throttle body. Fuel is injected into the port 2 TBI uses bottom feed ... the throttle body. Hither power output due to low resistance at intake manifold and higher volumetric efficiency.

State four methods to improve fuel economy of a vehicle.

Description : State four methods to improve fuel economy of a vehicle.

Last Answer : Answer: Methods of improving fuel economy.  1) Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2) Good driving habits. 3) Properly maintained fuel supply ... computer controlled ignition system. 6) Use of higher voltage automotive electrical system (42 volts system).

CNG is used as alternative fuel, justify with four merits and four demerits.

Description : CNG is used as alternative fuel, justify with four merits and four demerits.

Last Answer : 1. CNG reduces the harmful emission 2. Operating cost of the vehicle running on CNG is lower. 3. Reduced vehicle maintenance. 4. Fuel theft is not possible. Since NG cannot be siphoned ... 5. Inconsistent fuel properties. So above merits and demerits suggest that CNG is used as alternative fuel.

Describe the working of high pressure fuel pump.

Description : Describe the working of high pressure fuel pump. 

Last Answer : Working: Downward motion of plunger: The safety valve at the inlet opens if the pre-supply pressure of fuel exceeds 1.5 bars and fuel comes and fills the chamber till the plunger moves up to BDC. ... . A constant pressure of about 1400 to 1600 bar is maintained in the common rail. 

List three methods of fuel injection. Describe sequential method with suitable sketch.

Description : List three methods of fuel injection. Describe sequential method with suitable sketch.

Last Answer : Methods of petrol injection 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection 4. Continuous injection.  Sequential Injection: Each injector ... to crank/ camshaft position and pulse width, can be optimized for each individual cylinder.

List any four parameters of improving fuel economy.

Description : List any four parameters of improving fuel economy.

Last Answer : 1. Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2. Good driving habits. 3. Properly maintained fuel supply system. 4. Use of computer controlled fuel ... computer controlled ignition system. 6. Use of higher voltage automotive electrical system (42 volts system).

Compare sequential, continuous grouped and simultaneous methods of fuel injection.

Description : Compare sequential, continuous grouped and simultaneous methods of fuel injection.

Last Answer : Sequential fuel injection (SFI):-Injection of fuel occurs at the same time for all cylinders every revolution of the crankshaft. Therefore, fuel is injected twice within each four-stroke cycle. ... refers to the first three methods of injection, for continuous injection diagram is not needed)

Explain Biodiesel fuel. Give any four applications.

Description : Explain Biodiesel fuel. Give any four applications.

Last Answer : Biodiesel diesel  Bio diesel is a vegetable oil or animal fat based diesel fuel. It consists of long chain alkyl esters. It is made chemically reacting liquids with an alcohol. i) It is a ... diesel with 20% biodiesel) 4.Generatore 5.Air craft engines 6.Heating oil in domestic commercial boiler

Why fuel does not explode even though fuel pump is fitted in the fuel tank itself.

Description : Why fuel does not explode even though fuel pump is fitted in the fuel tank itself.

Last Answer : For the combustion/explosion to take place appropriate air fuel mixture and a source of ignition i.e. spark is required. The electric fuel pump is placed inside the fuel tank and is immersed in the ... not available. So fuel does not explode even though fuel pump is filled in the fuel tank itself

Describe air fuel- ratio requirements for diesel engines at no load to full load.

Description : Describe air fuel- ratio requirements for diesel engines at no load to full load.

Last Answer : Irrespective of load at any given speed, an approximately constant supply of air enters the cylinder. With change in load, the quantity of fuel injected is changed varying the air fuel ratio. The ... engine always designed to operate with an excess air of 15 to 40% depending upon the application

Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Description : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Last Answer : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

What is ECM? Explain how fuel injection is controlled using ECM.

Description : What is ECM? Explain how fuel injection is controlled using ECM.

Last Answer : ECM-The ECM is Electronic control module. It evaluates the sensor inputs using data tables and calculations to determine the output of the actuating devices. The ECM processes signals from the various sensors ... (MS) and the fuel flow from the injector increases in relation to the pulse width.

Give advantages and disadvantages of LPG as a fuel for automobile engines.

Description : Give advantages and disadvantages of LPG as a fuel for automobile engines.

Last Answer : Advantages of LPG 1. It is cheaper than petrol 2. It is highly detonation resistant and does not pre-ignite easily. 3. It gives better manifold distribution and mixes easily with air. 4. Residue ... 13. It is safe only if proper periodic maintenance of the gas system is done by trained person. 

Describe the working of fuel injector with neat sketch

Description : Describe the working of fuel injector with neat sketch

Last Answer : Fuel Injector: The injector assembly consists of - i) a needle valve ii) a compression spring iii) a nozzle iv) an injector body When the fuel is supplied to lift the injection ... spring tension and hence the valve opening pressure is controlled by adjusting the screw provided at the top.

List three method of fuel injection. Describe any one.

Description : List three method of fuel injection. Describe any one.

Last Answer : Methods of petrol injection 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection 4. Continuous injection. Sequential Injection: Each injector is ... to crank/camshaft position and pulse width, can be optimized for each individual cylinder.  

Faults and remedies for less efficiency of I C engine

Description : Faults and remedies for less efficiency of I C engine

Last Answer : 1. The air intake might be clogged, so there is fuel but not enough air - clean/ replace air filter 2. The fuel system might be supplying too much or too little fuel to the mix, meaning that combustion ... If your sparkplug or the wire leading to it is worn out, the spark will be weak - replace it

State four drawbacks of carbureted SI engine

Description : State four drawbacks of carbureted SI engine 

Last Answer : Drawbacks of carbureted SI engine: 1) No altitude compensation. 2) Mal-distribution of charge. 3) Variation in air: fuel ratio. 4) Inaccurate metering of charge. 5) Does not meet emission ... in poor efficiency. 10) Backfiring may take place. 11) Carburetor Icing may take place.

Explain engine design modification parameter to control emissions.

Description : Explain engine design modification parameter to control emissions.

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air fuel ... tolerances and using special type of carburetors. This also includes fuel injection in manifold.  

List the various fuels used in I.C. engines. Write the properties of Biodiesel Fuels used in I. C. engine.

Description : List the various fuels used in I.C. engines. Write the properties of Biodiesel Fuels used in I. C. engine.

Last Answer : 1 Petrol 2. Diesel 3. LPG 4. CNG 5.Hydrogen 6.Alcohol 7.Bio diesel Properties biodiesel  i) It is a renewable substitute fuel for petroleum diesel. ii) It has lower exhaust ... diesel vi) It is an environmentally friendly fuel that an be used in any diesel engine without modification.

Explain the pollutants from gasoline engine

Description : Explain the pollutants from gasoline engine

Last Answer : 1. Hydrocarbon (HC):-They play an important role in forming NO2 and O3 which are health and environmental hazard.  2. Carbon Monoxide (CO): CO is a highly poisonous gas that can cause dizziness, ... effect, NO2 is a very toxic gas and contributes to the formation of smog, ozone, and acid rain.

List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Description : List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Last Answer : Answer: Three sources of pollutant from gasoline engine:- 1) Carburettor losses 2) Crankcase blow-by 3) Engine exhaust emission Evaporative losses:-  1. Carburettor losses: occur due ... due to incomplete combustion, the exhaust gas also contains carbon monoxide, unburnt hydrocarbons (UBHC).

List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Description : List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Last Answer : Combustion chambers used in S.I. engine:- 1) T - Head 2) I - Head. 3) F - Head. 4) L - Head 5) Divided combustion chamber. 1. T Head Type Combustion chambers.  This ... and therefore more heat loss. 4. Valve size restricted. 6. Thermal failure in cylinder block also. 

Compare carbureted engine with MPFI engine

Description : Compare carbureted engine with MPFI engine

Last Answer : Sr.  Carbureted fuel system Electronic fuel injection system 1 Mal-distribution of charge.  Uniform distribution of charge.  2 Due to resistance in intake manifold volumetric ... is take place inside the manifold. Fuel being injected into or close to the cylinder. 

What is mean by ignition limit? Give ignition limit for SI engine.

Description : What is mean by ignition limit? Give ignition limit for SI engine.

Last Answer : Ignition Limit corresponds approximately to that mixture ratio, at lean & rich ends of the scale, where the heat released by spark is no longer sufficient to initiate combustion in the neighboring un-burnt mixture. ... 7:1 to 30:1 Actual Ignition limits for hydrocarbon fuels are 9:1 to 21:1

List down the pollutants from gasoline engine and diesel engine.

Description : List down the pollutants from gasoline engine and diesel engine.

Last Answer : Pollutants from gasoline engine:- 1. Hydrocarbons. 2. Carbon Monoxide. 3. Carbon dioxide. 4. Oxides of Nitrogen. Pollutants from diesel engine:- 1. Hydrocarbons 2. Carbon Monoxide. 3. Carbon dioxide. 4. Oxides of Nitrogen. 5. Particulate matters.

How gasoline engine emission is controlled by engine design modification and treatment of exhaust gas?

Description : How gasoline engine emission is controlled by engine design modification and treatment of exhaust gas?

Last Answer : Methods used for controlling of gasoline engine emission by engine design modification are:- 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air fuel mixtures ... ) to open and close the EGR valve. Thus it controls the amount of exhaust gas recalculated.

Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Description : Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Last Answer : The stages of combustion in S.I. engine: Stage I: Ignition Lag or Preparation Phase: It is a chemical process which depends on-nature of fuel, temperature & pressure, ... The rate of combustion reduces due to surface of the flame front becoming smaller and reduction in turbulence.