Draw block diagram for EDC type fuel pump in diesel engine.

Draw block diagram for EDC type fuel pump in diesel engine.
by

1 Answer

Answer :

Block diagram for EDC type fuel pump in diesel engine

image

OR

image

by

Related questions

With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Description : With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Last Answer : EDC: The ECU determines the correct quantity of the fuel to be injected based on the inputs and the data in the look up table. The fuel input depends on the rack position and thus ECU ... ECU can also protect the engine against overheating by regulating the maximum quantity of fuel delivered.

Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Description : Draw a layout of fuel injection system in CRDI diesel engine. State its fundamental requirement.

Last Answer : Fundamental requirement:-The line diagram of CRDI shows that the system is controlled by ECU. The sensors in the system are used to feed the input in the ECU.ECU will provide the signal ... fuel injector, common rail, High pressure fuel pump, ECM/ECU, Pressure sensor, Rail pressure limiter. 

Write the properties of diesel as a fuel in CI engine.

Description : Write the properties of diesel as a fuel in CI engine.

Last Answer : 1) Volatility: - The fuel should be sufficiently volatile in the operating range of temperature to produce good mixing and combustion. 2) Viscosity: Viscosity of a fuel is a measure of its resistance to flow. ... the temperature of unit mass of a diesel through 1°c. It is about 1.9 KJ/Kg°c.

Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Description : Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.  

Draw a block diagram of CRDI system and describe its working.

Description : Draw a block diagram of CRDI system and describe its working.

Last Answer : Working of CRDI system: High pressure pump provides high pressure fuel to the common rail. The common rail stores the fuel and maintains a constant pressure in the common rail line (approximately 1500 bars.). ... rate can be modified by controlling the nozzle needle movement. OR

Draw a labelled block diagram of CRDI system

Description : Draw a labelled block diagram of CRDI system

Last Answer : block diagram of CRDI system

Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Description : Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Last Answer : The stages of combustion in S.I. engine: Stage I: Ignition Lag or Preparation Phase: It is a chemical process which depends on-nature of fuel, temperature & pressure, ... The rate of combustion reduces due to surface of the flame front becoming smaller and reduction in turbulence.

Draw P-ⱷ diagram showing stages of combustion in SI engine.

Description : Draw P-ⱷ diagram showing stages of combustion in SI engine.

Last Answer : Stages of combustion in SI engines  Stage I: Ignition Lag or Preparation Phase: The time elapsed between the fuel injection into the combustion chamber and starting of combustion. It is the growth ... reduces due to surface of the flame front becoming smaller and reduction in turbulence.   

Describe the working of electronically controlled diesel injection pump.

Description : Describe the working of electronically controlled diesel injection pump. 

Last Answer : Answer: Electronically controlled diesel injection pump: This is similar to conventional pumps, but its injection is controlled by Electronic Control Unit (ECU) which control solenoid valve in the injection pump ... modifies the current to the solenoid valve, to supply fuel as per requirement.  

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large

Describe air fuel- ratio requirements for diesel engines at no load to full load.

Description : Describe air fuel- ratio requirements for diesel engines at no load to full load.

Last Answer : Irrespective of load at any given speed, an approximately constant supply of air enters the cylinder. With change in load, the quantity of fuel injected is changed varying the air fuel ratio. The ... engine always designed to operate with an excess air of 15 to 40% depending upon the application

Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Description : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Last Answer : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Explain the phenomenon of diesel knocking with the help of P-Ø diagram.

Description : Explain the phenomenon of diesel knocking with the help of P-Ø diagram.

Last Answer : Explanation- The knock phenomenon of C.I. engine depends upon delay period. If delay period is small then less amount of fuel is admitted into cylinder. When small amount of ... I. engines, higher compression ratio causes lesser ignition delay and hence lesser possibility of diesel knocks.

List down the pollutants from gasoline engine and diesel engine.

Description : List down the pollutants from gasoline engine and diesel engine.

Last Answer : Pollutants from gasoline engine:- 1. Hydrocarbons. 2. Carbon Monoxide. 3. Carbon dioxide. 4. Oxides of Nitrogen. Pollutants from diesel engine:- 1. Hydrocarbons 2. Carbon Monoxide. 3. Carbon dioxide. 4. Oxides of Nitrogen. 5. Particulate matters.

State the difference between turbocharger & VGT used in diesel engine.

Description : State the difference between turbocharger & VGT used in diesel engine.

Last Answer : Difference between turbocharger and VGT Sr. No. Parameter Turbocharger VGT 1 Fuel efficiency Lower fuel efficiency as compared to VGT Improved fuel efficiency by20% 2 ... required. 6 Engine response Sluggish response at low speeds Quick responsive engine

Explain the working of diesel engine glow plugs with neat sketch

Description : Explain the working of diesel engine glow plugs with neat sketch

Last Answer : Glow plug is an aid for cold starting of a C.I. engine. The self-ignition temperature of diesel is 250°C. For compression ignition, the charge (air + diesel) should reach a temperature of ... plugs is automatically interrupted. But starting may be attempted again as soon as the driver wishes.   

Describe the working of high pressure fuel pump.

Description : Describe the working of high pressure fuel pump. 

Last Answer : Working: Downward motion of plunger: The safety valve at the inlet opens if the pre-supply pressure of fuel exceeds 1.5 bars and fuel comes and fills the chamber till the plunger moves up to BDC. ... . A constant pressure of about 1400 to 1600 bar is maintained in the common rail. 

Why fuel does not explode even though fuel pump is fitted in the fuel tank itself.

Description : Why fuel does not explode even though fuel pump is fitted in the fuel tank itself.

Last Answer : For the combustion/explosion to take place appropriate air fuel mixture and a source of ignition i.e. spark is required. The electric fuel pump is placed inside the fuel tank and is immersed in the ... not available. So fuel does not explode even though fuel pump is filled in the fuel tank itself

Draw neat sketch of swirl type combustion chamber of IDI engine.

Description : Draw neat sketch of swirl type combustion chamber of IDI engine.

Last Answer : Fig. swirl type combustion chamber of IDI engine.

Draw a labeled block of LPG conversion kit. Describe its working.

Description : Draw a labeled block of LPG conversion kit. Describe its working.

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.

Explain working of LPG kit with labeled block diagram.

Description : Explain working of LPG kit with labeled block diagram.

Last Answer : Working of LPG Kit: LPG Tank: It is used to store the LPG at 10 bar Filler Valve: It allows the LPG into the tank while feeling. Pressure Relief Valve: It is used to limit ... regulator Mixer / gas injection which flows the LPG into the combustion chamber  Block diagram:  

What is EGR? Explain with the help of block diagram.

Description : What is EGR? Explain with the help of block diagram.

Last Answer : Exhaust Gas Recirculation Valve (Operation-2 marks, Sketch-2 marks) When the engine is idling, the EGR valve is closed and there is no EGR flow into the manifold. The EGR valve remains closed until the ... exhaust gas (less than 10% of total) to be supplied into the incoming air: fuel mixture

Draw the circuit diagram of glow plug and explain its operation.

Description : Draw the circuit diagram of glow plug and explain its operation.

Last Answer : Answer: Operation of glow plug: Glow plug is an aid for cold starting of a C.I. engine. The selfignition temperature of diesel is 250°C. For compression ignition, the charge (air + diesel) ... is automatically interrupted. But starting may be attempted again as soon as the driver wishes. 

Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Description : Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Last Answer : Drawbacks of carbureted (SI) Engine. Parameter Drawbacks Emission Does not meet emission Norms Fuel consumption Due to absence of throttling specific fuel consumption is ... distribution of charge. Fuel distribution for each cylinder is not equal for multi cylinder engine.

Why pressure regulator is required in fuel supply system of EFI system engine?

Description : Why pressure regulator is required in fuel supply system of EFI system engine? 

Last Answer : 1. In low pressure common rail systems (EFI) that do not require high capacity fuel flow where the fuel injector is mounted on a intake manifold port runner on engine displacing less than 2.0 liters. ... differential pressure between 2.0 and 3.5 bar and allows excess fuel to return to the fuel tank.

Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Description : Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Last Answer : Sr. No. Carburetted engine Electronic Fuel Injection (EFI) engine 1 Fuel atomization depends upon velocity of air in the venturi. Atomization of fuel is independent of cranking ... occurs in carbureted engine. Equal quantity of fuel is supplied to port for each cylinder

List two drawbacks of carbureted SI engine during fuel distribution and drivability.

Description : List two drawbacks of carbureted SI engine during fuel distribution and drivability.

Last Answer : Fuel distribution : Drawbacks 1. Mal-distribution of charge. 2. Inaccurate metering of charge. 3. Fuel atomization depends upon velocity of air in the venture. Drivability: Drawbacks 1 ... temperature compensation. 4) No compensation of Exhaust gas recirculation. 5) Backfiring may take place.

Explain any two engine modifications and two fuel modifications to control emission from gasoline engine.

Description : Explain any two engine modifications and two fuel modifications to control emission from gasoline engine. 

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air ... Fuel Volatility: Fuel volatility is compromise of high volatility and low volatility to control the pollution

Discuss causes and remedies for following faults in CI engine: (i) Engine does not start or stalls just after starting (ii) Excessive fuel consumption.

Description : Discuss causes and remedies for following faults in CI engine: (i) Engine does not start or stalls just after starting (ii) Excessive fuel consumption.

Last Answer : I) Engine does not start or stalls just after starting

Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Description : Compare SI and CI engine on the basis of air-fuel ratio, power output, emission and knocking.

Last Answer : Parameter SI engine CI engine Air-fuel ratio air-fuel ratio is 14.7:1 air-fuel ratio is 20:1 to 70:1  Power output  Power output is Less than CI engine due ... Knocking take place at the end of combustion. Knocking take place at beginning or start of the combustion. 

Discuss the drawbacks of carbureted SI engine on the base of, Air-fuel ratio, fuel consumption, power output, emission.

Description : Discuss the drawbacks of carbureted SI engine on the base of, Air-fuel ratio, fuel consumption, power output, emission. 

Last Answer : 1) Air-fuel ratio: - As in SI engine Air-fuel ratio varies from 8:1 to 18.5:1 i.e. from 8 kg of air/kg of fuel to 18.5 kg of air/kg of fuel. Richer or leaner air-fuel ratio limit causes the engine to ... 8 kg of air/kg of fuel to 18.5 kg of air/kg of fuel. So emission is more in SI engine.

State four properties of SI engine fuel.

Description : State four properties of SI engine fuel.

Last Answer : 1. It should mix readily with air and provide uniform manifold distribution. That is, it should easily vaporize. 2. It must be knock resistant. 3. It should not pre-ignite easily. 4. It should ... not form gum and varnish. OR 1. Volatility2. Knock Resistivity 3. Sulphur Content 4. Gum Content

LPG is used as an alternative fuel for SI engine. Justify your answer

Description : LPG is used as an alternative fuel for SI engine. Justify your answer

Last Answer : LPG is used as an alternative fuel for SI engine because of following advantages. 1. The exceptional advantages of LPG as an alternative engine fuel have been mainly from the simplicity of its ... plug is increased. 9. Fuel supply system can be easily modified by introducing a conversion kit.

Describe four properties of gasoline as a fuel for SI engine

Description : Describe four properties of gasoline as a fuel for SI engine

Last Answer : Volatility: volatility depend upon fractinal composition of fuel. Method of measuring volatility has been standardized by ASTM ( American society of Testing Materials) and the graohical representation ... gasoline to improve the gasoline stability during storage by inhibiting the formation of gums.

Compare carbureted engine fuel supply system with MPFI system.

Description : Compare carbureted engine fuel supply system with MPFI system.

Last Answer : Sr.No. Carbureted fuel supply system MPFI fuel supply system 1 Mal-distribution of charge.  Uniform distribution of charge.  2 Due to resistance in intake manifold volumetric ... is take place inside the manifold. fuel being injected into or close to the cylinder. 

Draw neat sketch to show TBI system of SI engine and name its parts.

Description : Draw neat sketch to show TBI system of SI engine and name its parts.

Last Answer : Draw neat sketch to show TBI system of SI engine and name its parts.

State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Description : State the different types of SI engine combustion chambers. Draw a neat sketch of any one.

Last Answer : 1) T Head Type Combustion chambers 2) L Head Type Combustion chambers 3) F- Head combustion chamber 4) Over head valve or I head combustion chamber 5) Hemispherical combustion chamber 6) Bathtub ... - Head combustion chamber 4) Over head valve or I head combustion chamber

List and Explain two type of diesel smoke. Explain four cause of diesel smoke.

Description : List and Explain two type of diesel smoke. Explain four cause of diesel smoke.

Last Answer : Answer: Two type of diesel smoke 1) Blue-white smoke 2) Black smoke Four cause of diesel smoke:- 1) Blue smoke is due to burning the droplets of lubricating oil in combustion ... because of worn piston rings & cylinder liners & water come in combustion chamber because cracked water jacket.

What is diesel smoke? State two methods to control diesel smoke.

Description : What is diesel smoke? State two methods to control diesel smoke.

Last Answer : Diesel smoke: Smoke is defined as visible products of combustion, is due to poor combustion. It originates early in the combustion. Rich fuel-air mixture & at pressures developed in diesel ... manifold. This shortens the delay period- curbs thermal cracking which is responsible for soot format

Compare the following fuels on the basis of calorific value and knocking. LPG, CNG and bio-diesel

Description : Compare the following fuels on the basis of calorific value and knocking. LPG, CNG and bio-diesel 

Last Answer : Parameter LPG CNG Bio-diesel Calorific value 46.4MJ/Kg LPG has consistent & higher calorific value.  52.34 MJ/Kg Which is higher than LPG. 37.27 MJ/Kg this ... 65 which is higher than petro-diesel. So intensity of knocking is less in biodiesel compared to petro diesel.

What is diesel knock? How it is controlled?

Description : What is diesel knock? How it is controlled?

Last Answer : Diesel knock The knock phenomenon of C.I. engine depends upon delay period. If delay period is small then less amount of fuel is admitted into cylinder during ignition delay period. As it burns ... by multiple injections so that only small amount of fuel is injected at first (pilot injection). 

What are the causes of diesel smoke?

Description : What are the causes of diesel smoke?

Last Answer : Cause of diesel smoke:- 1) Blue smoke is due to burning the droplets of lubricating oil in combustion chamber because of worn piston rings & cylinder liners. 2) White smoke is due to ... of worn piston rings & cylinder liners & water come in combustion chamber because cracked water jacket. 

Explain the methods of fuel injection used EFI system.

Description : Explain the methods of fuel injection used EFI system.

Last Answer : Methods of fuel injection: 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection. 4. Continuous injection. 1. Simultaneous Injection: Injection of fuel ... of the fuel injection is determined by ECU depending upon load and speed. 

Compare throttle body injection with port fuel injection systems.

Description : Compare throttle body injection with port fuel injection systems.

Last Answer : Sr. No. TBI system PFI System 1 Fuel is injected into the center of the throttle body. Fuel is injected into the port 2 TBI uses bottom feed ... the throttle body. Hither power output due to low resistance at intake manifold and higher volumetric efficiency.

State four methods to improve fuel economy of a vehicle.

Description : State four methods to improve fuel economy of a vehicle.

Last Answer : Answer: Methods of improving fuel economy.  1) Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2) Good driving habits. 3) Properly maintained fuel supply ... computer controlled ignition system. 6) Use of higher voltage automotive electrical system (42 volts system).

CNG is used as alternative fuel, justify with four merits and four demerits.

Description : CNG is used as alternative fuel, justify with four merits and four demerits.

Last Answer : 1. CNG reduces the harmful emission 2. Operating cost of the vehicle running on CNG is lower. 3. Reduced vehicle maintenance. 4. Fuel theft is not possible. Since NG cannot be siphoned ... 5. Inconsistent fuel properties. So above merits and demerits suggest that CNG is used as alternative fuel.

List three methods of fuel injection. Describe sequential method with suitable sketch.

Description : List three methods of fuel injection. Describe sequential method with suitable sketch.

Last Answer : Methods of petrol injection 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection 4. Continuous injection.  Sequential Injection: Each injector ... to crank/ camshaft position and pulse width, can be optimized for each individual cylinder.

List any four parameters of improving fuel economy.

Description : List any four parameters of improving fuel economy.

Last Answer : 1. Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2. Good driving habits. 3. Properly maintained fuel supply system. 4. Use of computer controlled fuel ... computer controlled ignition system. 6. Use of higher voltage automotive electrical system (42 volts system).

Compare sequential, continuous grouped and simultaneous methods of fuel injection.

Description : Compare sequential, continuous grouped and simultaneous methods of fuel injection.

Last Answer : Sequential fuel injection (SFI):-Injection of fuel occurs at the same time for all cylinders every revolution of the crankshaft. Therefore, fuel is injected twice within each four-stroke cycle. ... refers to the first three methods of injection, for continuous injection diagram is not needed)

Explain Biodiesel fuel. Give any four applications.

Description : Explain Biodiesel fuel. Give any four applications.

Last Answer : Biodiesel diesel  Bio diesel is a vegetable oil or animal fat based diesel fuel. It consists of long chain alkyl esters. It is made chemically reacting liquids with an alcohol. i) It is a ... diesel with 20% biodiesel) 4.Generatore 5.Air craft engines 6.Heating oil in domestic commercial boiler