1 Answer

Answer :

In the majority of instruments, damping is provided by eddy currents.

Related questions

Description : In a PMMC instrument, the damping provided is :  (A) air damping (C) eddy current damping (B) fluid damping (D) magnetic damping using a magnet

Last Answer : In a PMMC instrument, the damping provided is : eddy current damping 

Description : A control system having unit damping factor will give  (1) Oscillatory response (2) Undamped response (3) Critically damped response (4) No response

Last Answer : 1

Description : Ideally, the damping torque should be  (1) Proportional to velocity of the moving system and operating current.  (2) Proportional to the velocity of the moving system but independent of operating ... operating current.  (4) Independent of the velocity of the moving system and operating current.

Last Answer : Ideally, the damping torque should be Proportional to the velocity of the moving system but independent of operating current. 

Description : Eddy current damping cannot be used for moving iron instrument because

Last Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

Last Answer : Damping of the Ballistic galvanometer is made small to get first deflection large.

Last Answer : The disc of an instrument using eddy current damping should be of conducting and non-magnetic material.

Description : Permanent magnet moving coil instruments are used for

Last Answer : PMME are mostly used for measuring voltage and current.

Description : The use of _____ instruments is merely confined within laboratories as standardising instruments.

Last Answer : The use of absolute instruments is merely confined within laboratories as standardizing instruments.

Last Answer : Commonly used instruments in power system measurement are induction.

Last Answer : Operating torques in analogue instruments are deflecting, control and damping.

Last Answer : The power factor of a single phase load can be calculated if the instruments available are three ammeters or three voltmeters.

Last Answer : The switch board instruments should be mounted in vertical position.

Last Answer : According to application, instruments are classified as switch board, portable.

Last Answer : The use of absolute instruments is merely confined within laboratories as standardizing instruments.

Description : What do you mean by secondary instruments?

Last Answer : The instruments which will give the direct readings are called secondary instruments

Description : List the different methods to produce damping torque.

Last Answer : Methods of providing damping torque in indicating type instruments: 1) Air friction damping. 2) Fluid friction damping. 3) Eddy current damping.

Description : Describe with neat diagram air friction damping. 

Last Answer : Air Friction Damping: Here air trapped in the chamber works as damping medium for the piston movement connected to the spindle. The piston moves in the air chamber. The clearance between piston and ... will be the damping torque, bringing the pointer to the equilibrium position quickly. 

Description : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Last Answer : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is 16

Description : The damping factor of a particular system is unity, the system response will be

Last Answer : The damping factor of a particular system is unity, the system response will be critically damped

Description : The damping winding in synchronous motor is generally used to?

Last Answer : The damping winding in synchronous motor is generally used to provide starting torque and prevent hunting.

Description : List of Scientific Instruments

Last Answer : Hydrometer measures humidity Barometer measures atmospheric pressure Purity of milk is measured by lactometer Fathometer measures the depth of oceans. Sextant is used for measuring ... regulate the temperature to a particular degree. Viscometer: is an instrument to measure viscosity.

Description : Electrical Measuring Instruments

Last Answer : Electrical Measuring Instruments

Description : Compare analog and digital instruments .

Last Answer : Parameter Analog Instrument Digital Instrument  1 Principle The instrument that displays analog signals is called as on analog instrument.  The instrument that displays ... , etc. Logical analyzer, signature analyzer, computers, microprocessor based instruments, etc. 

Description : calibration and the need of calibration for measuring instruments.

Last Answer : Calibration - It is a process of estimating the value of a quantity by comparing that quantity with a standard quantity.    Need of calibration: - Calibration defines the accuracy and ... aim of calibration is to minimize any measurement uncertainty by ensuring the accuracy of test equipment.

Description : Advantages of digital instruments

Last Answer : 1. They are having high input impedance, so there is no loading effect 2. They are having higher accuracy 3. An unambiguous reading is obtained 4. The output can be interfaced with external equipment 5. They are available in smaller size . 

Description : State the effect of dead zone on instruments.

Last Answer : It is the largest change in input during which the output remains constant. So during dead zone, even if input changes, output remains the same.

Description : Define: i) Range ii) Span of instruments

Last Answer : i) Range: It is defined as the difference between Greatest and Smallest value of the data or reading of the instrument.  ii) Span: It is defined as the algebraic difference between the upper and lower range values

Description : Explain the essential toques in analog type measuring instruments.

Last Answer : List of torques in analog instruments:  1. Deflecting torque  2. Controlling / Restraining torque.  3. Damping torque.  1. Deflecting torque: To create deflection proportional to ... the speed higher will be the damping torque bringing the pointer to the equilibrium position quickly. 

Description : State two purposes of calibration of measuring instruments.

Last Answer : Purposes of calibration of measuring instruments: - The purpose of calibration is to ensure that readings of an instrument are consistent with other instruments. It is also important in determining the ... will need to be calibrated periodically to make sure it can function properly and safely. 

Description : List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Last Answer : Types of errors in measuring instruments:  A) Gross error: These are due to mistakes on the part of person using the instrument.  B) Systematic Error: i) Instrumental Error: These ... multiplying factor.  C) Random error: These persist even after gross and systematic errors are removed.

Description : State the meaning of secondary instrument. Classify secondary instruments.

Last Answer : Secondary instruments: - Gives reading directly of the quantity being measured. - Calibrated with respect to absolute instruments  Classification of Secondary instruments:  1. Depending on the ... on permissible error: i) Standard meters ii) Substandard meters iii) First grade instruments.

Description : Define following terms related to measuring instruments: i) Sensitivity ii) Selectivity.

Last Answer : i) Sensitivity: It is the ratio of the change in output signal to the change in input signal of quantity being measured.  ii) Selectivity: It is the term to describe fulfillment of the requirements of measurement by an instrument to be suitable for use in a given situation. 

Description : List out any four effects of electric current used in measuring instruments & write name of meter working on it.

Last Answer : Effects of Electric Current used in measuring instruments:  1. Magnetic Effect: PMMC and Moving Iron type Ammeters, voltmeter and Dynamometer type wattmeters etc.  2. Electromagnetic induction ... . Electrostatic effect: Voltmeters.  5. Hall Effect: Flux meter, Poynting vector wattmeter.

Description : Describe systematic errors in measuring instruments. 

Last Answer : Systematic errors: -  ➢ Instrumental Error: These errors are caused due to the mechanical structure of measuring instrument.  a) Inherent shortcomings of instruments: Instrument may read ... or electrostatic fields.  ➢ Observational Error: Parallax errors, incorrect multiplying factor. 

Description : Compare primary and secondary instruments.

Last Answer : Primary instruments  Secondary instruments  Gives magnitude of quantity in terms of physical constants of instrument  Gives reading directly of the quantity measured.  Need no calibration  ... .  e.g. magnetic meter, induction meter, hotwire meter and electrostatic meter 

Description : State the material used for moving coil and former for PMMC instruments. 

Last Answer : Material Used for Moving Coil and Former for PMMC Instruments:  Material used for moving coil: Copper  Material used for Former: Aluminium

Description : List any four effects employed in measuring instruments.

Last Answer : Effects Employed in Measuring Instruments: 1. Magnetic Effect 2. Electromagnetic induction 3. Heating effect 4. Electrostatic effect 5. Hall Effect 

Description : Standard Commands for Programmable Instruments (SCPI)

Last Answer : Standard Commands for Programmable Instruments (SCPI) SCPI stands for Standard Commands for Programmable Instruments it is often pronounced as Skippy. SCPI is a instrument language that control the ... is for storing data in instrument. Display : for presentation.

Description : Does anyone know how one gets to perform at Carnegie Hall?

Last Answer : Practice. Practice. Practice.

Description : What is an object/item/instrument that you feel one with?

Last Answer : My clarinet.

Description : Why don't violins have frets?

Last Answer : answer:To allow the player to hit quarter and half notes. It also allows the instrument to be tuned in non-equal intervals. Also, you can get fretted violins (supposed to be good for new players).

Description : This may seem a stupid question, but how does a left-handed string player play in an orchestra?

Last Answer : They are generally seated at the other end of the line. if there are more than one, then they sit together.

Description : How do I sell a cello in the bay area or seattle area?

Last Answer : I’ve always had good luck with Craigslist, but as on any such site, you’ve got to be really careful to find out the buyer is legit. I NEVER sell stuff anymore to anyone outside my immediate geographical area.

Description : What banjo should I buy?

Last Answer : Buy one that sounds good to you. It’s the same for any instrument.

Description : How much should a good 4/4 violin cost for a beginner?

Last Answer : Even for a beginner a good one will be upwards of 700–800 dollars. You could find one for 50–100 I’m sure, but it would not sound good at all and you don’t want to start learning the notes with a bad sounding instrument as that is what your ear will get used too.

Description : Has anyone learned to play a musical instrument when you were older? I'm interested in those where this would have been their first musical instrument.

Last Answer : Define “older” I changed instruments later in life from guitar to violin… I suppose that does not count though.

Description : Anyone have a used upright bass in hawaii for sale?

Last Answer : I think you’d be a lot more successful if you tried posting this on craigslist.

Description : What is the instrument that the woman uses in "The Grudge 3" (briefly shown in grudge 2) during the exorcism thing?

Last Answer : A triangle???

Description : How can i not feel like i am using all of the air i have when i am playing my clarinet.

Last Answer : Try using a thinner reed and wetting it longer. Also there are chest expansion exercises that all woodwinds should do. They’re the same as the ones that swimmers use.

Description : What instrument do you have to use more air for: clarinet, alto sax, or base clarinet?

Last Answer : I would say the bass clarinet if it is the largest. I briefly played an alto flute and it required a lot more air than the standard flute.